• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.65-73
• /
• 2007

This paper presents a low power CMOS continuous-time $\Sigma\Delta$ (sigma-delta) modulator for UMTS receivers. The loop filter of the continuous-time $\Sigma\Delta$ modulator consists of an active-RC filter which performs high linearity characteristics and has a simple tuning circuit for low power operating system The architecture of this modulator is the $3^{rd}-order$ 4-bit single loop configuration with a 24 of OSR (Oversampling Ratio) to increase the power efficiency. The modulator includes a half delay feedback path to compensate the excess loop delay. The experimental results of the modulator are 71dB, 65dB and 74dB of the peak SNR, peak SMR and dynamic range, respectively. The continuous-time $\Sigma\Delta$ modulator is fabricated in a 0.18-um 1P4M CMOS standard process and dissipates 15mW for a single supply voltage of 1.8V.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.125-132
• /
• 2015

This paper is about analysis of UDRE monitoring method for Korean Satellite navigation system, which is the correction parameter of satellite measurements. New receiver clock bias and tropospheric delay error estimation method to make pseudo-range residual for UDRE monitoring is proposed. Saastamoinen model and Neill mapping function are used for estimate the tropospheric delay and EKF is used for estimgate the receiver clock bias. Through the satellite measurements and regional weather data received directly from the domestic is using for UDRE monitoring analysis, more suitable UDRE monitoring threshold can be deducted and it is expected to be utilized for fault detection technique of Korean Satellite Navigation System.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.3
• /
• pp.225-231
• /
• 2011

The satellite clock anomalies, one of the abnormal signal factors of the GPS satellites, can have a significant impact on the GPS measurements. However, it can be difficult to detect the anomalies of the satellites clock before the range of the satellites clock error becomes bigger than the range of the other factors, due to the measurement including error of the orbit, ionosphere delay, troposphere delay, multipath and receiver clock. In order to perform quick and accurate detection by minimization of critical range in anomalies of the satellites clock, this paper suggested a solution to detect precise anomalies of the satellites clock after application of carrier smoothing filter from measurement by dual-frequency and adjustment of errors which can be occurred by other factor and the receiver clock errors. The performance of the proposed method was confirmed by comparing to the satellite clock biases which are provided by IGS.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.64-74
• /
• 2001

In this paper, a dynamic minislot reservation protocol(DMRP) is proposed and analyzed to improve the performance of the multicast traffic processing in wavelength division multiplexing(WDM) networks. For the proposed protocol analysis, the WDM network architecture with a passive star coupler is used. One pair of transceiver is used for a control channel and the ocher pair of transceiver with one fixed transmitter and one tunable receiver are used for data transmission. In this protocol. the packets which fail to have successful transmission in the present time slot due to data channel and destination collisions, have priority to have successful reservation in the contention-less minislots of the next time slot. Therefore, protocols have improved the throughput and the system delay performance caused by the reduced probabilities of control channel contentions and destination collisions probability. Today, the efficient protocol that can handle the various types of data traffic is needed. As results, the DMRP is useful to improve the performance of throughput and system delay characteristics regardless of the kinds of traffic.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1058-1064
• /
• 2006

In this paper, the channel capacity of a specified wireless indoor multiple-input multiple-output(MIMO) channel is estimated by analyzing spatial characteristics of this channel using the three-dimensional ray tracing method, and a technique for deriving an optimized separation of multi-antenna elements is proposed. At first, the ray paths, the path losses, and the time-delay profile are computed using the three-dimensional ray tracing method in an indoor corridor environment, which has the line of sight(LOS) and non-line of sight(NLOS) regions. The ray tracing method is verified by a comparison between the computation results and the measurements which are obtained with dipole antennas, an amplifier and a network analyzer. Then, an MIMO system is positioned in the indoor channel environment and the ray paths and path losses are computed for four antenna-position combinations and various values of the antenna separation to obtain the channel capacity for the MIMO system. An optimum antenna-separation is derived by averaging the channel capacities of 100 receiver positions with four different antenna combinations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.680-687
• /
• 2018

Borehole radar is a radar used for underground resources and geological exploration purposes. It needs a high-speed sampler to transmit electromagnetic waves with a pulse width of several ns and to receive reflected waves of several tens to several hundreds of MHz reflected from the object to be surveyed. ETS (Equivalent-Time Sampling), which can achieve sampling performance of several GHz with a sampling frequency of several tens of MHz, is suitable for use as a sampler of a borehole radar receiver. In this paper, we propose a method to control the sampling clock delay, which is the most important factor in ETS sampler design, using four clocks with phase difference of $90^{\circ}$ for one clock source. The proposed method can reduce the time required to acquire the data within the set interval by 1/25 than the conventional method using the delay generator. When the implemented sampler is applied to the receiver of existing borehole radar, it is possible to accumulate 58 additional times due to the shortened sampling time. In addition, by using one delay control logic compared with the conventional method using several sampling clock delay control logic in order to satisfy the target sampling range, it is possible to omit the correction process which was necessary in the past. As a result, the structure of the system can be simplified and a uniform sampler can be realized.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.243-245
• /
• 2014

본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing)시스템에서 OFDM 심벌 타이밍 옵셋에 따른 4096QAM 의 uncoded-BER(Bit Error Rate) 및 성상도를 측정하였다. uncoded-BER 은 수신기의 FEC(Forward Error Correction) 복호기 이전에서 측정된 BER 을 의미한다. 측정을 위해, OFDM 을 사용하는 DVB-C2(Digital Video Broadcasting for Cable Systems 2) 송수신기를 FPGA(Field Programmable Gate Array)를 이용하여 구현하였으며, OFDM 심벌의 CP(Cyclic Prefix)를 이용하여 OFDM 심벌 동기를 수행하였다. 일반적으로, OFDM 심벌 동기는 OFDM 심벌에서 CP 가 반복된다는 특성을 이용한 상관기를 사용한다. 또한, ISI(Inter Symbol Interference) 및 ICI(Inter Channel Interference)를 최소화하기 위해, 채널의 최대 지연시간을 고려하여 CP 내에서 OFDM 심벌 동기가 획득된다. 이럴 경우 수신기에서는 각 부반송파에 할당된 QAM 심벌들의 위상 회전이 발생하지만, 등화기에서 이러한 위상 회전이 보상된다. 부반송파에 할당된 파일롯 심벌들을 이용하여 채널 추정 및 보상을 하는 등화기에서, 파일롯 심볼들도 OFDM 심벌 타이밍 옵셋에 의해 위상회전이 발생하기 때문에 채널 추정 값에 영향을 미친다. 따라서, 본 논문에서는 4096QAM 과 ZF-LE(Zero Forcing Linear Equalizer)를 사용한 경우, OFDM 심벌 타이밍 옵셋에 따른 uncoded-BER 및 성상도의 측정 결과를 제시하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2570-2572
• /
• 2005

본 논문에서는 다중 경로 오차 제거를 위해, 4개의 상관값을 제공하는 가중 협대역 상관기(Weighted Narrow Correlator) 구조에 대해 제안한다. 가중 협대역 상관기는 서로 다른 칩 간격을 가지는 여러 상관값 출력에 가중치를 주어 다중경로 신호에 의한 코드 위상 측정 오차를 줄이는 방법이다. 우선 다양한 지연시간 및 신호 감쇄를 가지는 다중 경로 신호에 대하여, 가중치에 대한 수신기의 성능 변화를 분석하고 이를 통해 최적의 가중치를 선택하였다. 제안한 상관기는 일반 수신기와 동일한 신호 획득능력을 가지며, 협대역 상관기보다 개선된 다중경로 오차 제거 능력을 보인다. 가중 협대역 상관기의 성능은 시뮬레이션을 통한 의사거리 측정치의 비교를 통해 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.6A
• /
• pp.893-899
• /
• 2000

WDM technology has been an emerging issue for the efficient use of optical links. WDM uses a number of different wavelengths that are assigned to each channel. The minimal number of optical transcievers and receivers should be used in a node to build an economic WDM transmission system without degrading system performance. Hence, the analysis of performance parameters such as throughput and delay is important to guarantee the WDM system performance. In this paper, the performance of a MAC protocol on a slotted WDM system that has a tunable transmitter(TTX), a tunable receiver(TRX), and a fixed receiver(FRX), respectively, on each node, was statistically analyzed. The computer simulation validates the performance analysis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.44-53
• /
• 2007

In this paper, we focus on the developments of complex location awareness algorithms for real-time location based service and precise/stable localization in the outdoor. In the case of using galileo satellite system along with GPS, several error factor such as the ionosphere can be reduced for an increment of used frequency and visible satellites. Therefore, localization estimation error is no longer having problems with location awareness. But, chips synchronization error induces the error of acquisition and tracking, and the performance of receiver can be decreased. In order to solve this problem, this paper proposes a correlator for performance improvement of receiver in the precise localization.