• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.2
• /
• pp.133-140
• /
• 2006

The performance of proton exchange membrane fuel cell was decreased by reverse voltage using fuel starvation. Performance decrease in local area could be affected by duration and extent of reverse voltage. Hydrogen and air stoichiometic ratio was used to find the experimental condition of abrupt voltage decrease. LabVIEW was used to make control logic of automatic load off system in preset voltage. Reverse voltage experiment was done down to -1.2 V at constant current condition. When fuel cell voltage was reached to preset voltage, electronic load was disconnected to make open circuit voltage for 1 minute. Fuel cell performance was checked every 5 cycle and the degree of performance decrease and/or recovery was estimated. Ohmic resistance and charge transfer resistance were increased and platinum surface area was reduced 41% after reverse voltage experiment.

• 월간낙농육우
• /
• v.19 no.4 s.204
• /
• pp.102-103
• /
• 1999

한우비육의 경우 번식장애나 질병문제 등이 자주 발생되는 반면 홀스타인 수소를 비육할 경우는 우선 질병에 강하고 일당중체량이 우수하여 출하일수가 짧고 자금 회전이 빠르며 출하가 비교적 용이하다. 또한 밑소 구입이 쉽고 다두 사육이 가능하다는 장점이 있다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.05a
• /
• pp.115-119
• /
• 2002

고분자 전해질 연료전지는 전해질로 고체고분자막을 사용하는 연료전지로 고분자막은 수소 이온의 활발한 전달을 위해 일정량의 수분이 존재해야 한다. 따라서 연료전지의 운전 중에 고분자막은 항상 수화되어 있어야 하며 수분이 부족하게 되면 수소이온 전도도가 떨어지고, 막의 수축으로 인해 전극과 막 계면의 저항이 증가한다. 반대로 수분이 많이 존재하면 촉매 표면에 반응기체의 확산이 어려워져 전지 성능이 감소하게 된다.(중략)

• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.132-145
• /
• 2014

There is a general agreement that performance of hydrogen fuel cell vehicle(FCV) with respect to cold start, packaging, acceleration, refueling time and range has progressed to the point where vehicles that could be brought to market in 2015_2020 will satisfy customer expectations. However cost, durability and the lack of refueling infrastructure remain significant barriers. Cost have been dramatically reduced and durability has been enhanced over the past decade, yet are still about twice what appears to be needed sustainable market success. Advanced Technologies for the commercialization of hydrogen FCV were reviewed.

• Journal of the Korean Ceramic Society
• /
• v.41 no.5
• /
• pp.410-416
• /
• 2004

In this study, we fabricated magnetite coated on a cordierite honeycomb which has complex shape by ultrasound-enhanced ferrite plating. The effects of the plating condition on the formation of the magnetite and its microstructure were investigated. The magnetite coated on the honeycomb became an oxygen-deficient ferrite by H$_2$ gas reduction, then the effects of the molar concentrations of ammonium acetate for $CO_2$ gas decomposition have been studied. As the molar concentration of a pH buffer($CH_3$COONH$_4$, 0.1946∼0.3892 M) solution increased, the average particle size increased about 200∼250 nm. The magnetite coated on the honeycomb was reduced by H$_2$ gas for 2 h at 30$0^{\circ}C$. The inner pressure change in the cell began to occur at 315∼34$0^{\circ}C$. The H$_2$-Reduced magnetite coated on the honeycomb at 35$0^{\circ}C$ contained an oxygen deficient magnetite and $\alpha$-Fe phase. The thermogravimetric analysis with H$_2$ reduction and $CO_2$ decomposition were carried out with the magnetite coated on the honeycomb. A weight loss in process of H$_2$ reduction occurred between 32$0^{\circ}C$ and 34$0^{\circ}C$, while a weight gain was observed during the $CO_2$ decomposition.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.92-101
• /
• 2023

To solve the problem of climate change, carbon neutrality has now become a necessity rather than an option. Hydrogen is not only a energy storage that can supplement the intermittent production of renewable energy, but is also considered a good alternative in the field of utilization as it does not emit carbon dioxide after reaction. In order to revitalize hydrogen vehicles, one of the fields of hydrogen utilization, the construction of hydrogen station infrastructure must be preceded. Prioritization of risk factors is necessary for efficient operation and risk assessment of hydrogen stations, but due to the short operation period of domestic hydrogen stations, there is a lack of frequency data on accidents and their reliability is low. In this study, we aim to identify the causes and consequences of deviations in hydrogen stations through HAZOP analysis. Additionally, we intend to analyze them using Fuzzy-AHP. Through this, we intend to derive the decision values for the causes of deviations in hydrogen stations and apply them to hydrogen accident cases and risk assessments to confirm the reliability and utility of the data.

• Applied Chemistry for Engineering
• /
• v.20 no.4
• /
• pp.449-452
• /
• 2009

The absence of Fe, Se, and Mo in a minimal medium prevented the production of hydrogen from the anaerobic culture of Escherichia coli MC4100. Fe, Se, and Mo are known to be cofactors of formate dehydrogenase ($FDH_{II}$) of both E. coli and Enterobacter aerogenes. Hence when these trace elements are absent in the minimal medium, hydrogen production through formate dehydrogenation would be inhibited not only in E. coli but also in E. aerogenes. Hydrogen production by E. aerogenes 413 was delayed when lacking these trace elements. Therefore, it is believed that hydrogen production of E. aerogenes is initiated not by the reoxidation of nicotinamide adenine dinucleotide (NADH) but by formate decarboxylation.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.70-76
• /
• 2020

In this study, we suggested the direction to lower the risk by analyzing the risk factors for each process for the hydrogen refueling station to be installed in Chungju. HyRAM, one of the quantitative risk assessment tools for hydrogen gas, was used to analyze the hazards. By evaluating the frequency of accidents and consequences for each process, the most dangerous processes and accident factors were presented, and the risk mitigation factors were synthesized. Hydrogen refueling stations are currently in the global infrastructure expansion period, and the lack of accident data could be an alternative to this risk assessment and is expected to be used as a reference for the future expansion of hydrogen refueling stations.

• Journal of Energy Engineering
• /
• v.28 no.3
• /
• pp.10-17
• /
• 2019

According to South Korea's policy of supplying eco-friendly hydrogen vehicles, related industries are actively conducting research on the development of hydrogen cars and hydrogen charging station infrastructure. On the other hand, there is a lack of empirical research and assessment of the risk of non-metallic materials (such as liners, seals, gaskets) for classified materials that directly affect the durability and reliability of hydrogen vehicles and hydrogen charging stations. In this study, the risk factors for liners and seals of non-metallic parts used in high-pressure hydrogen installations were derived using FMEA, and the RPN values were calculated by converting the severity, frequency of occurrence and degree of detection into scores. The maximum value of the RPN 600, minimum value 63, average value 278.5 was calculated and periodic control of the liner and seal was identified as important. In addition, through hydrogen soakage and oxygen aging tests for non-metallic rubber products, physical test values that can be used as basic data were presented.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.26.1-26.1
• /
• 2009

최근 반도체 세정에 있어서 지난 40년 동안 지속적으로 사용되고 있는 알칼라인 기반의 RCA 세정법은 많은 초순수 및 화학액 소모량과 세정시 불필요한 박막의 손실, 환경적인 문제로 인하여 이를 대체하고자 하는 새로운 새정액 및 세정 방법에 대한 연구가 활발하게 이루어지고 있다. 특히 초순수에 가스를 혼합하여 메가소닉을 이용한 기능수 세정은 기존 RCA 세정액의 문제점들을 해결하기 위한 세정액으로 최근 반도체 제조 공정 뿐만 아니라 Photo mask, FPD 세정 공정에서 널리 이용되고 있다. 하지만 기능수에 대한 기초적인 특성 연구와 메가소닉에 의한 세정력 변화에 대한 연구는 부족한 상태이다. 본 연구에서는 고순도의 수소가스(99.999%)를 가스 접촉기, pHasorII (Entigris, USA) 와 순환 속도의 조절이 가능한 펌프, BPS-3 (Levitronix, USA) 를 이용하여 지속적으로 초순수와 수소가스를 혼합하는 방법으로 수소수를 제조하였으며, 용존 수소 농도계, DHDI-1 (TOA-DKK, Japan)으로 수소수의 농도를 확인하였다. 0.1 MPa 압력과, 3 LPM의 수소가스 유출속도에서 최대 2.0 ppm의 수소수를 얻을 수 있었으며, 수소수의 기초 특성을 평가하기 위하여 수소 농도 변화에 따른 pH, 표면 에너지를 측정하였다. 또한 압력 변화에 따른 반감기를 측정하여 bath형태의 세정기에서 적용 가능성을 평가하였다. 수소수의 세정력은 $Si_3N_4$ 입자가 임의로 오염된 실리콘 웨이퍼를 이용하여 bath 및 매엽식 세정기에서 수소수 농도와 메가소닉 형태 및 첨가제 변화에 따른 세정효율을 기존의 SC-1 세정액과 각각 비교 평가하였다. 기능수 발생장치에서 압력이 제거된 상태에서는 평균 20분의 반감기를 갖는 것이 관찰되었고, 압력이 유지된 상태에서는 수소수의 농도가 유지되는 것을 확인하였으며, pH의 경우 수소수의 농도가 점차 증가함에 따라 감소하여 2.0 ppm의 농도에서 pH 5.3정도의 값을 나타내었다. 표면 장력은 초순수와 비교했을 때 큰 변화가 없음을 확인할 수 있었다. Bath 형태의 세정기에서 메가소닉을 인가하여 수소수의 세정효율을 측정한 결과, 같은 조건에서 실험한 초순수와는 비슷하며, SC-1보다는 낮은 세정효율이 측정되었다. 반면 매엽식 세정기에서 동등한 조건의 실험을 실시한 결과, 수소수 세정에서 첨가제에 의한 영향으로 SC-1을 대체할 수 있는 높은 입자 제거효율을 가짐을 확인할 수 있었다.