• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.963-968
• /
• 1997

Cereals and legumes were ground, blended and extruded with a twin-screw extruder to form a reconstituted grain. The basic formula was as follows: brown rice 30%, barley 30%, wheat 20%, millet 5%, sorghum 5%, soybean 7%, and red bean 3%. Extrusion conditions were properly set for feed moisture content of $24{\sim}30%$, barrel temperature of $50{\sim}60^{\circ}C$, and screw speed at 250 rpm. The extruded grain was air-dried and evaluated for quality characteristics, compared with milled rice. Size and shape of the reconstituted grain were similar to short-grain milled rice. Stacking volume of the reconstituted grain was a little higher than that of milled rice, and its water absorption was more rapid. From the texture measurements, hardness of cooked reconstituted grain was slightly lower and adhesiveness was appeared to be higher.

• Journal of Korea Technology Innovation Society
• /
• v.14 no.1
• /
• pp.22-39
• /
• 2011

This study examines the wage level from a viewpoint of major-job match as part of an analysis on the skill mismatch problem in 4-year college graduates. The empirical analysis explicitly incorporate the sample selection bias as an econometric problem not only suggested but merely introduced in the earlier studies. This study also set up a major-job match variable, which was usually handled as a binary variable for analytical convenience, as a polychotomous choice variable in selection equation as provided by the survey. In particular, it considered multi-cohort survey on graduates of the years 1982, 1992, and 2002 for the empirical analysis. As a result of empirical analysis, the wage premium of a major-job match was identified. This result was consistent after the consideration of a sample selection bias and also after modeling the major-job match variable as polychotomously selective. Through an analysis classified by the major, this study identified a relatively high wage premium among Social Science, Engineering, and Science majors. However, there was a difference in the effect of selection among these majors. Also, by assessing cohort effects this study found that the skill mismatch had rapidly progressed in 1992, while difference between 1992 and 2002 cohorts are insignificant. The analysis suggests that wage level is better understood within the context of both sample selection and major-job match, and regardless of model specification the major-job match affects wage strongly.

• Journal of the Korean earth science society
• /
• v.38 no.2
• /
• pp.150-160
• /
• 2017

In order to determine the porosity of rock, the 'standard test method for porosity and density of rock' proposed by the Korean Society for Rock Mechanics is commonly used. However, the standard test method, which uses a drying oven, takes 8 to 24 hours to complete the test in taking samples out of the oven every four hours and measuring the weight of the specimen. To complement these disadvantages, we devised a method for measuring rock porosity by using a microwave oven. The devised method reduced the cause of errors and the inconvenience occurred in the process of weighing samples by constructing a weight monitoring system, which monitors the drying process. A suitable heating/pause time was set up to maintain the temperature of sample below $105{\pm}3^{\circ}C$ in drying process, and an alarm system was implemented in order to stop drying process when the weight change of the rock sample is within 0.1% of the initial weight. The porosity was determined from the dry weight of the sample, which was obtained by the curve fitting of weight monitoring data. Then, the porosities obtained by using the microwave oven were compared with those obtained by the standard test method. Test results using sandstone samples showed that the porosities obtained by a microwave oven was similar to those obtained by the standard method and the porosity difference between two methods was as large as 0.4%. In addition, repeated porosity measurement using the same specimen showed that the standard deviation of the porosity, which reflects the precision of the measurement was as good as 0.23%. Therefore, a microwave oven porosity measurement system can give the porosity of rock samples with high reliability.

• Journal of the Korean Geographical Society
• /
• v.44 no.6
• /
• pp.833-851
• /
• 2009

Recently, there is a matter of common interests in 'classroom' because many pedagogues and teachers feel urgently the understanding of educational field. This study aims to investigates classroom researches for the last twenty years, asserts the theme 'the spatiality of classroom' which is important to understand diverse point of views in classroom theories and is overlooked at the same time, and considers it in terms of 'classroom space metaphors'. Specially, the author reviews the recent trend in classroom researches, and names it 'classroom theory' in that it deals with classroom not as a means but as an object and has undergone methodological transition. In the mean time, the author lays great emphasis on 'the spatiality of classroom' which is important to expand classroom theory and is overlooked at the same time. To approach this, the author categorizes the classroom space metaphors of existing classroom researches into 'classroom as a work space' and 'classroom as a learning space' by drawing the concept 'metaphor'. And then the author presents new metaphor 'classroom as a lived space' on the basis of the recent classroom theory, and tries to abstract its educational significance in classroom by way of Thirdspace.

• Food Science and Preservation
• /
• v.14 no.4
• /
• pp.385-393
• /
• 2007

Much research is conducted on the biological activities of medicinal herbs, traditional plants, and agricultural products, cultivated in Korea. This study focused on optimization of hot-water extraction methods for such products, by analyzing and monitoring extraction characteristics using a response surface methodology. We found that the total phenolics contents, electron-donating abilities, and nitrite-scavenging abilities of extracts were significantly affected both by the solvent used for extraction, and by the nature of the particular herb or plant under study. The extraction efficiencies of valuable ingredients such as alliin, allicin, and total thiosulfinate, were greatly affected by extraction temperature, but not by extraction time or the solvent used. We elicited a regression formula for each variable. We first entered the optimal values of all extraction conditions giving active ingredients into the model. Next, we entered the optimal values of all extraction conditions favoring the retention of valuable antioxidant characteristics. Finally, we entered processing factors into the model. Overall, the optimal extraction was at $80^{\circ}C$ for 3.5 hr with 8.5 ml of solvent/g of sample. The predicted values of each variable were similar to the actual values.

• Food Science and Preservation
• /
• v.14 no.6
• /
• pp.584-590
• /
• 2007

This study investigated quality characteristics of Aster scaber (color; firmness; vitamin C, chlorophyll and phenolic contents; and sensory properties) under blanching conditions of $90^{\circ}C$/25 min, $95^{\circ}C$/16 min, and $100^{\circ}C$/6 min, and salt concentrations of 0%, 1% and 2%. The contents of vitamin C, chlorophyll and total phenolic compounds, and firmness decreased by 39.5-60.3%, 26.2-31.5%, 45.6-50.1% and 50.7-51.1%, respectively, after blanching. For these parameters, treatment with 1% salt was 7.1-30.2%, 9.2-12.2%, 35.9-52.0% and 2.7-6.8% relative to the control, and drip water could be prevented by 3.3-23.4%. Results for treatment with 2% salt were (respectively) 22.7-34.1%, 10.4-20.7%, 55.5-80.4% and 13.8-17.3%, and drip water could be prevented by 23.9-27.3%. These results showed that 2% salt treatment had a greater effect on preservation of quality characteristics than 1% treatment and the control. With respect to sensory evaluation, the 2% treatment had lower overall acceptability than the 1% treatment because of the saltier taste. However, the 1% treatment was more acceptable than the control. The optimal blanching condition was found to be $100^{\circ}C$/6 min and 1% salt.

• Food Science and Preservation
• /
• v.20 no.4
• /
• pp.502-509
• /
• 2013

This study was conducted in order to monitor the extraction conditions for a gel-state beverage development of the Opuntia ficus-indica stem. Moreover, the organoleptic properties of the beverage prepared by the extract were optimized using the response surface methodology (RSM). The determination coefficient ($R^2$) value for the extraction yield of the stem was 0.95 (p<0.01). The maximum extraction yield was obtained at an extraction temperature of $93.02^{\circ}C$, 123 min of extraction time and 22.57 mL/g of water to sample. The beverage was prepared with the addition of xanthan gum, sugar and persimmon vinegar to the extract with a central composite design. The maximum organoleptic color of the beverage was obtained at 0.38% xanthan gum, 7.91% sugar and 0.76% persimmon vinegar. The maximum organoleptic flavor was obtained at 0.30% xanthan gum, 7.06% sugar and 1.26% persimmon vinegar. The maximum organoleptic taste was obtained at 0.22% xanthan gum, 10.36% sugar and 0.90% persimmon vinegar. The maximum overall palatability (3.92 score) of the gel-state beverage was obtained at 0.35% xanthan gum, 10.83% sugar and 1.21% persimmon vinegar.

• Food Science and Preservation
• /
• v.22 no.1
• /
• pp.44-50
• /
• 2015

This study was performed to optimize the preparation of frozen lotus roots. Prior to freezing, an optimal blanching condition at $100^{\circ}C$ for 5 min was established, based on the microbial growth, texture, total phenolic content (TPC), and sensory evaluation results. The blanched samples were then frozen under various freezing conditions ($-20^{\circ}C$ in a freezer for 2 hr, $-70^{\circ}C$ in a gas nitrogen convection chamber for 7 min, and $-196^{\circ}C$ in liquid nitrogen for 20 sec), and their qualities after thawing were determined. The scanning electron microscopic analysis indicated that the microstructure of the sample frozen at $-70^{\circ}C$ was similar to that of the control sample, compared with the other freezing conditions (-20 and $-196^{\circ}C$). The antioxidant activities of the frozen samples decreased compared to those of the control, but there was no significant (p<0.05) difference among the treatments. In terms of TPC, the samples frozen at -70 and $-196^{\circ}C$ had significantly (p<0.05) higher values than the sample frozen at $-20^{\circ}C$. In addition, the drip loss of the sample frozen at $-20^{\circ}C$ was higher than those of the other frozen samples. These results suggest that freezing at $-70^{\circ}C$ in a gas nitrogen convection chamber can be an optimal freezing method of producing high-quality frozen lotus roots.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.21-26
• /
• 2009

Polycyclic aromatic hydrocarbon(PAH) contents were evaluated in sesame oils from sesame seeds of different origins and in commercial samples using HPLC with fluorescence detection. The sesame seeds, which had been harvested from India, China, and Korea, were roasted at $250^{\circ}C$ for 25 min, and the commercial sesame oils were purchased from a local market. The recoveries for eight PAHs spiked into the sesame oils ranged from 80.2 to 99.2%. The mean levels of total PAHs in the sesame oils harvested from China, Korea, and India were 3.97, 1.57, and 1.20 ${\mu}g$/kg, respectively. The PAH contents in the commercial sesame oils ranged from 0.79 to 2.15 ${\mu}g$/kg.

• Journal of Environmental Science International
• /
• v.4 no.1
• /
• pp.19-28
• /
• 1995

A rainfall runoff model described in this paper which is based on Basin- wide Ecological Model(BAWEM) calculates the fate of afro-chemicals in a watershed located of golf links. The rainfall runoff coefficients of afro-chemicals, which are the dominant parameters to predict the movement of agro-chemicals from soil and turfgrass to downstream water, are estimated. Also, the model is used to estimate the level of health risks the residents around golf links are exposed to. The fidelity of rainfall runoff model of afro-chemicals was validated by the observed data obtained during rainy period. The calculated results from this model were found to be in the same order of that of the observed. The rainfall runoff coefficients of four agro-chemicals used in golf links were 5.4$\times$$10^{-3}$, 1.9$\times$$10^{-3}$, 3.0$\times$$10^{-4}$ and 4.4$\times$$10^{-3}$ for flutolanil, isoprothiolane, chlorpyrifos and simazine, respectively The health risk level to the residents around golf links is evaluated to be rather low:the ratio of estimated dose through drinking water to the 10% of ADI(Acceptable Daily Intake) value or VSD for 10-a life time risk varied in the range of 0.005~0.04 and 0.003~0.11, respectively, for both the annual mean and maximum monthly mean cases.