• Journal of Korean Home Economics Education Association
• /
• v.15 no.3
• /
• pp.75-88
• /
• 2003

The purpose of this study was to grasp the instruction type and the school hours allocations for the$\ulcorner$Technology and Home Economics$\lrcorner$united on the Korean education course revised seventhly and to offer the basic materials for the efficient curriculum implementation type through proving that how are the degree of studying load of students, interest, necessity, and satisfaction and whether those are affected or not. The subject of this survey were 297 students at first grade in boys high school, girls high school, and coeducational school located in the Chungnam-Province, Taejeon Megalopolis City. The period of this survey was from 30th Sep. 2002 to 5th Oct. 2002. The results were as follows; 1. In the implementation type of the curriculum. whole charge teaching was twice times as much as alloted teaching. 2. About half of the students(54.2%) recognized that the burden of study was less than before. More two third of students(72.4%) were satisfied with implementation of subject. The coeducational school and girls high school students were being more satisfied than the boys high school students, and students educated by alloted teaching were more satisfied. 3. The field of Home Economics was higher than the field of Technology in the degree of interest and necessity for$\ulcorner$Technology and Home Economics$\lrcorner$curriculum contents. 70.8% of the respondents was satisfied for the content materials. The coeducational school and the girls high school students were more satisfied with the course content than boys high school students.

• Journal of The Korean Association For Science Education
• /
• v.39 no.5
• /
• pp.573-584
• /
• 2019

It is necessary to look at the essence of STEAM education from the viewpoint of the teacher who is the subject of education execution. We carry out questionnaires and telephone interviews for the purpose, definition, change, etc. of STEAM education from eight elementary, middle, and high teachers who are rich in policy and field application experience. As a result of the analysis, the purpose of the STEAM education that the specialists mentioned includes the active participation of the students. Most experts pointed out that the definition of STEAM education is ambiguous. So, it is necessary to express a clear goal of STEAM education. The category and level meaning "fields" from "a convergence of two or more fields" are not indicative definitions, but can be different depending on the situation, considering the context of activities and the level of students. The perception of the experts on framework may be a guide for STEAM education and stumbling block. It is necessary for "Context" to shift away from the emphasis on the real life connection and to the emphasis on the interest of the student and the guidance of the class. "Creative design" must be based on trial and error in the process of solving problems. "Emotional touch" needs to correct elements that cannot be observed, evaluated, and applied to lessons that are elements of emotional experience. As for the expansion of STEAM education, most expert teachers have recognized that STEAM education is becoming increasingly stable and that policy change has continued to slow the pace of stabilization.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.269-281
• /
• 2008

Fatigue or overload can result in mechanical problems of implant components. The mechanical strength in the implant system is dependent on several factors, such as screw and fixture diameters, material, and design of the fixture-abutment connection and abutment. In these factors, the last rules the strength and stability of the fixture-abutment assembly. There have been some previous reports on the mechanical strength of the fixture-abutment assembly with the compressive bending test or short-term cyclic loading test. However, it is restrictive to predict the long-term stability of the implant system with them. The purpose of this study was to evaluate the influence of the design of the fixture-abutment connection and abutment on the mechanical strength and failure mode by conducting the endurance limit test as well as the compressive bending strength test. Tests were performed according to a specified test(ISO/FDIS 14801) in 4 fixture-abutment assemblies of the Osstem implant system: an external butt joint with Cemented abutment (group BJT), an external butt joint with Safe abutment (group BJS), an internal conical joint with Solid abutment (group CJO), and an internal conical joint with ComOcta abutment (group CJT). The following conclusions were drawn within the limitation of this study. Compressive bending strengths were decreased in order of group BJS(1392.0N), group CJO(1261.8N), group BJT(1153.2N), and group CJT(1110.2N). There were no significant differences in compressive bending strengths between group BJT and group CJT(P>.05). Endurance limits were decreased in order of group CJO(600N), group CJT(453N), group BJS(360N), and group BJT(300N). 3. Compressive bending strengths were influenced by the connection and abutment design of the implant system, however endurance limits were affected more considerably by the connection design.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.156-175
• /
• 2013

The purpose of this study was to verify that the impacts of experience of donation for education to improve the teaching efficacy of pre-technology teacher. The Invention experience of donation for education was performed with Invent-touring sponsored by Chunnam National University Invention Education Center for Teachers and was included by development of creative problem solving program, program execution and evaluation. Research participants were Technology education Majors and minors 20 students. The active locations were D children community center, K alternative school, D Elementary School and D middle school. For the study, various literature researches were reviewed intensively about donation for education and teaching efficacy. The instrument for the study was the modified STEBI(Science Teaching Efficacy Beliefs Instrument) for technology education by 3 experts. This study was designed by single group pre and post test design (One-Group Pretest-Posttest Design) and was conducted by the pre-test and post-test. Check the reliability of the tool was conducted with Cronbach ${\alpha}$ coefficient analysis, pre-test 0.840, post-test 0.746. The analysis of data from the 5% significance level, paired sample t-test was performed using the SPSS 19.0 statistical tool. The results were as follows: 1. Teaching efficacy of pre-technology teachers who participated in the invention experience for educational donation technology has improved. 72. The qualitative study was performed by the interviews with students who participated in. Humanism was positively change and learning opportunity was provided to develop the competence of technology education teacher. Based upon the conclusion of this study, the donation activity for invention education need to use learning strategies for pre-technology teacher to improve teaching efficacy.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.1 no.1
• /
• pp.127-156
• /
• 2006

This paper introduced successful case studies of the EIP (Entrepreneurship Intensive Programs) programs that are planed by 5MBA (Small and Medium Business Administration) and executed by Hoseo University and Jinju National University in 2004. Therefore, the illustrations and examples used in this paper are based on the EIP programs of those schools. Currently there are five graduate schools for Entrepreneurship educations that are originated from the EIP program models and those graduateschools are actively and successfully working. The purpose of this paper is to find out the diffusing strategies of the Entrepreneurship spirits and Entrepreneurship Education programs after careful analysis and review of the EIP programs. The main factors of the Success of the EIP are as follows. First, there were excellent modules of the education process. Second, there were firm and clear goals of the education. Three, there were differentiated contents of the entrepreneurship education programs. Four. each and every education performance was monitored. Five, during the programs, real start-up cases were actually handled and students had many opportunities to present their cases. However, there were some shortcomings to improve and change of the entrepreneurship education. First of all, it was very difficult to make proper education formation that is fit in the purpose of the program. Second, motivating students to find out their own business opportunities so as to turn them into real business was not satisfactory or easy. Third, there were some limitations in distributing and executing the EIP budgets. Therefore, to improve the efficiency of the Entrepreneurship education, following expanding strategies should be complemented. First, continuous redesigning of the entrepreneurship education programs is very important. Second, the specialization of the contents of the entrepreneurship education programs is essential. Third, there should be some discretionary room for the management of the entrepreneurship programs. Fourth, it is also important activating the entrepreneurship networks among schools of the entrepreneurship education. Finally, it is necessary to give some incentives and motivations based on the proper performance evaluation system.

• Korean Journal of Environmental Agriculture
• /
• v.21 no.3
• /
• pp.178-188
• /
• 2002

Constructed wetlands typically cost less to build and operate, and require less energy than standard mechanical treatment technology but they have similar performance to centralized wastewater treatment plants. Therefore, they were constructed especially many in rural areas, where are small villages but not industries. Plantless column tests were performed to investigate the possibility on using zeolite as a filter medium of constructed wetland for the wastewater treatment. Removal efficiency was $COD_{Cr}$ 94.63% T-P 41.41% and $NH_4^+-N$ 99.75% at hydraulic load 314 $L/m^2{\cdot}d$ and filtering height 100 cm filled with a zeolite mixture. This zeolite mixture consisted of 1 : 1 by volume of zeolites in the diameter range of 0.5 to 1 mm and 1 to 3 mm. Accordingly, hydraulic load 314 $L/m^2{\cdot}d$ was considered as optimal. Three zeolite mixtures were used to determine the optimal mixing ratio by volume of a zeolite (A) in the diameter range of 0.5 to 1 mm to a zeolite (B) in the diameter range of 1 to 3 mm 1 : 3, 1 : 1 and only B in A to B by volume were tested at hydraulic load 314 $L/m^2{\cdot}d$ and filtering height 100 cm $COD_{Cr}$ removal efficiency was more than 89% at mixing ratios of 1 : 3 and 1 : 1 in A to B. That of T-P ranged 56.42 to 58.72% and, that of T-N and $NH_4^+-N$ was 87% and 99% regardless of mixing ratios of two zeolites. Removal efficiency was lower at the column filled with only B. Removal efficiency was better at Inter medium filled with mixing ratio 1 : 1 in A to B than with the other mixing ratios. Thus, it was found that the mixture of mixing ratio 1 : 1 in A to B was appropriate far Inter medium of constructed wetland Removal efficiency was higher in down-flow than in up-flow, and all contaminants were removed most in 20 cm filter height near feeding area.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.761-772
• /
• 2007

This study was conducted to evaluate effects of dietary pine cone meal on growth performance, blood characteristics, carcass quality and fecal noxious gases compounds in finishing pigs. The total of sixty [(Landrace×Yorkshire)×Duroc] pigs(86.01±0.25kg in average initial body weight) were used in 35 days assay. Dietary treatments included 1) T1(2% cottonwood sawdust), 2) T2(1% cottonwood sawdust+1% pine cone meal) and 3) T3(2% pine cone meal). There were three dietary treatments with five replicate pens per treatment and four pigs per pen. During the overall periods, there were no significant differences in ADG(Average daily gain), ADFI(Average daily feed intake) and gain/feed ratio among treatments (P>0.05). Also, Nutrient digestibilities and blood characteristics were not affected by dietary treatments. At the end of this experiment, a*-value of logissimus dorsi muscle color and sensory evaluation color were higher in T3 treatment than T1 treatment(P<0.05). In fatty acid contents of lean, C18:1 and total MUFA were significantly lower in T1 treatment than other treatments(P<0.05). However, total ω6 and total PUFA were higher in T1 treatment than T2 treatment(P<0.05). In fatty acid contents of fats, total SFA was significantly higher in T2 treatment than T3 treatment(P<0.05). C18:1 was higher in T2 treatment than T1 treatment(P<0.05). There were no significant differences in fecal noxious gas compounds among the treatments. In conclusion, the results of the experiment was affected by dietary supplementation of pine cone meal on meat color and fatty acid composition of pork in finishing pigs.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.25 no.2
• /
• pp.41-48
• /
• 2017

A vertical multi-stage ammonia stripping reactor using E-PFR, which has been proved to be superior in anaerobic and aerobic treatment, was developed and a lab scale experiment was conducted. According to the change of stage number condition, the removal rate of the ammonia nitrogen in the reactor with 0-stage was about 52.5% after 8 hours (pH 10, temperature $35^{\circ}C$, and the air/liquid ratio $3min^{-1}$) However, in the reactor with 5-stage, the removal efficiency was about 62.6%. According to the change of pH condition, the removal rate of ammonia nitrogen was about 42.6% at pH 9 after 8 hours, and was about 74.4% at pH 11 (5-stage reactor, temperature $35^{\circ}C$, and the air/liquid ratio $3min^{-1}$). According to the change of temperature condition, the removal rate of the ammonia nitrogen was about 51% at $25^{\circ}C$ after 8 hours (5-stage reactor, pH 10, and the air/liquid ratio $3min^{-1}$), and was about 87.2% at $45^{\circ}C$. According to the change of air injection volume condition, the removal rate of the ammonia nitrogen was about 45.8% at $2min^{-1}$ after 8 hours (5-stage reactor, pH 10, and at $35^{\circ}C$). and was about 75% at $4min^{-1}$. Based on these results, we will follow up the applicability of the actual plant in the future through continuous operation evaluation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.8
• /
• pp.759-769
• /
• 2013

Electronic equipment has been applied to virtually every area associated with commercial, industrial, and military applications. Specifically, electronics have been incorporated into avionics components installed in aircraft. This equipment is exposed to dynamic loads such as vibration, shock, and acceleration. Especially, avionics components installed in a helicopter are subjected to simultaneous sine and random base excitations. These are denoted as sine on random vibrations according to MIL-STD-810F, Method 514.5. In the past, isolators have been applied to avionics components to reduce vibration and shock. However, an isolator applied to an avionics component installed in a helicopter can amplify the vibration magnitude, and damage the chassis, circuit card assembly, and the isolator itself via resonance at low-frequency sinusoidal vibrations. The objective of this study is to investigate the dynamic characteristics of an avionics component installed in a helicopter and the structural dynamic modification of its tray plate without an isolator using both a finite element analysis and experiments. The structure is optimized by dynamic loads that are selected by comparing the vibration, shock, and acceleration loads using vibration and shock response spectra. A finite element model(FEM) was constructed using a simplified geometry and valid element types that reflect the dynamic characteristics. The FEM was verified by an experimental modal analysis. Design parameters were extracted and selected to modify the structural dynamics using topology optimization, and design of experiments(DOE). A prototype of a modified model was constructed and its feasibility was evaluated using an FEM and a performance test.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.16 no.3
• /
• pp.464-471
• /
• 2002

Author applied several engineering methodologies to classical ultrasonic nebulizer to cope with it's demerits. After several trials and errors, we got the several meaningful results. To evaluate the modified ultrasonic nebulizer for inhalation toxicology of cadmium, author used light-scattering photometer. This paper is the one part of inhalation exposure systems for inhalation toxicology study of cadmium. According to the testing conditions, source temperature 50℃ and inlet-duct band temperature 150℃, aerosol generation results for sodium chloride and cadmium chloride were as followings: Coefficients of variation(CV) of sodium chloride and cadmium chloride for repeated trials were 3.38 and 4.77 for 10g, 2.47 and 5.02 for 5g, and 4.70 and 2.98 for 2.5g. All the CVs were within 10% of acceptance variability. Count Per Minute(CPM) changes of NaCl and CdCl₂ for 5 repeated trials were similar. CPM ratios of CdCl₂/NaCl were 1.13 for 10g, 0.76 for 5g, and 1.06 for 2.5g. Relative aerosol generation of cadmium chloride to sodium chloride was the highest in 10g. Efficiency increases of 24.50% for 5g NaCl, 14.91 % for 2.5g NaCl, and 16.48% for 2.5g CdCl₂ with respect to theoretical efficiency were observed but 0.04% efficiency decrease was observed in 5g CdC₂. According to the modifications of source temperature(20, 50, 70℃) and inlet-duct band temperature(20, 50, 100, 150, 200℃), aerosol generation results for NaCl and CdCl₂ were as followings: CPM trends for each quantity excepting 10g NaCl in inlet-duct band temperature 200℃ were similar, and the highest CPM was observed in source temperature 70℃ to each inlet-duct band temperature. The highest CPMs to 10, 5, and 2.5g NaCl were observed in source temperature 70℃ and inlet-duct band temperature 20℃. Aerosol generation of cadmium chloride was increased with the higher source temperature, excepting inlet-duct band temperature 200℃. The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this trend was similar to NaCl aerosol generation The highest CPMs for 10, 5, and 2.5g CdCl₂ were observed in source temperature 70℃ and inlet-duct band temperature 20℃, and this result was similar to NaCl aerosol generation. Observed efficiencies of 5 and 2.5g NaCl were similar to ifs theoretical efficiency but -3.08% efficiency decrease of 5g CdCl₂, 17.47% efficiency increase of 2.5g CdCl₂ were observed. CPM ratio of CdCl₂/NaCl of 10g was different to 5 and 2.5g, and 2.5g ratio was higher than 5g ratio. In conclusion, to get maximum aerosol generation for NaCl and CdCl₂ will be the conditions that set the appropriate inlet-duct band temperature for each materials and increase the source temperature. Sodium chloride can be used to evaluate the performance and predict the concentration for cadmium aerosol in aerosol generator and inhalation exposure system.