• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.12
• /
• pp.967-975
• /
• 2013

In the design of underwater electro acoustic transducer, power factor improvement circuit is more required rather than impedance matching if the driving power amplifier has little inner resistance. Many research results have been focused on the power matching circuit designing for transferring maximum power in the wideband. There are few results in the designing study on the power factor improvement for the wide band underwater electro acoustic transducer. In this paper, we set up a new design method on the power factor improvement for the wide band electro acoustic transducer, and confirm its feasibility by the experiments.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.4
• /
• pp.303-310
• /
• 2010

We fabricated $La_{0.6}Sr_{0.4}MnO_3$ thin films using radio frequency (RF) magnetron sputtering. They were grown on sapphire substrates with various deposition conditions. After the growth of the $La_{0.6}Sr_{0.4}MnO_3$ thin films, they were annealed at various temperatures to be crystallized. We successfully fabricated single phase $La_{0.6}Sr_{0.4}MnO_3$ thin films with high electrical conductivity. The room temperature resistivity was $1.5{\times}10^{-2}{\Omega}{\cdot}cm$. It can be considered that $La_{0.6}Sr_{0.4}MnO_3$ thin films are one of the feasible candidates for electrodes for integrated device applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.69-69
• /
• 2010

현대 건축물에서 건물에너지의 손실은 대부분은 창호를 통하여 유출되어지고 있으며 에너지 절감을 위해서는 창호의 단열성을 향상시켜야한다. 저방사(Low Emissivity) 코팅유리는 건축물의 냉난방비용을 절약할 수 있는 대표적인 건축재료로써 외부에서 유입되는 태양광의 가시광선 영역은 높은 투과율을 가지면서 적외선 영역과 겨울철 실내 난방열을 반사하는 특징을 지니는 박막코팅기술이다. 이 코팅유리는 일반적으로 유전체/금속/유전체 다층박막 구조로 되어있으며, 유전체층은 내구성 증진과 금속층의 반사를 낮추어 투과율이 향상된다. 금속층은 적외선영역의 복사에너지를 반사하는 역할을 하며 전도성이 우수한 Ag 또는 Au, Pt 등을 이용하고 있다. Ag의 경우 산화물기판 위에 증착하였을 경우 island 성장을 하고 이들의 합체는 전기적, 광학적 특성에 큰 영향을 미치게 된다. 본 연구에서는 DC-sputtering법으로 제조된 Ag/glass, Ag/Ta/glass 박막을 제조하고 Ta seeding이 Ag의 전기적, 광학적 성질에 미치는 영향을 관찰하였다. 박막의 표면 미세구조는 FE-SEM(Field Emission Scanning Electron Microscope)과 AFM(Atomic Force Microscope)으로, 표면저항은 4 point probe로 분석하였다. 광투과율은 UV-Vis spectroscopy와 FT-IR로 측정하였으며 측정파장범위는 각각 200~1100nm와 1400~2400nm 이다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.8
• /
• pp.510-515
• /
• 2014

Thin films of cubic $Na_{0.6}WO_3$, which is one of the sodium tungsten bronze, were fabricated by rf sputtering for the electrode applications in integrated sensors and actuators. A single-phase cubic $Na_{0.6}WO_3$ sputtering target of power type was prepared by conventional solid-state reaction. Thin films were deposited from the powder target, and the as-deposited films were amorphous, thus they annealed by tube furnace or RTP for crystallization. Thin films having cubic phase $Na_xWO_3$ were fabricated by the optimization of sputtering and post-annealing conditions, but single-phase cubic $Na_{0.6}WO_3$ thin films were not obtained. Although the films were not in single phase, they had good electrical conduction properties showing electrical resistivities of $10-4{\Omega}{\cdot}cm$ order.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.6
• /
• pp.468-472
• /
• 2011

Conductive $SrMoO_3$ thin films were fabricated by RF magnetron sputtering with the powder-type sputtering target, and annealed for crystallization. When RTP (rapid thermal processing) in vacuum was applied, the fabricated thin films showed the mixed phases of $SrMoO_3$ and $SrMoO_4$, but $SrMoO_3$ phase could be promoted by the lowering of the working pressure during deposition. In order to eliminate $O_2$ gas during deposition and annealing, further lowering of the working pressure and furnace annealing in hydrogen atmosphere were tried. With the optimization of the deposition and annealing conditions, the thin film with nearly single-phase of $SrMoO_3$ was obtained, and it showed good electrical conduction properties with a low resistivity of $2.5{\times}10^{-3}{\Omega}{\cdot}cm$ at room temperature.

• Annual Conference of KIPS
• /
• 2010.04a
• /
• pp.649-652
• /
• 2010

무선 센서 네트워크에서 클러스터링 기법은 데이터 병합을 통해 통신 대역폭 사용을 용이하게 하며, 센서 노드들간의 송수신 전력 소비를 줄일 수 있고, 노드 증가에 따른 네트워크 확장성이 용이하므로 현재 많은 연구가 되고 있다. 클러스터링 기법은 클러스터 헤더를 선출하는 것으로부터 시작된다. 기존의 클러스터 헤더 선출 기법들은 에너지 잔여량, 센서 노드의 위치, 센서 노드들의 평균 에너지 등을 클러스터 헤더 선출값으로 하여 클러스터 헤더를 선정한다. 그러나 이 기법들은 악의 적인 노드가 다른 노드의 클러스터 헤더 선출값을 변경하고, 자신의 클러스터 헤더 선출값을 증가시켜 클러스터 헤더가 될 수 있는 보안 취약점을 가지고 있다. 이와 같은 보안 취약점을 개선하기 위해 클러스터 헤더 선출값에 대한 무결성과 클러스터 헤더 선출값을 전송하는 노드의 인증이 필요하다. 본 논문에서는 one-way key chain 기법을 사용하는 안전한 클러스터 헤더 선출 기법을 제안하고, 제안한 기법에 대한 안전성을 분석한다.

• Annual Conference of KIPS
• /
• 2009.04a
• /
• pp.1348-1351
• /
• 2009

패킷 재배치(packet reodering)는 전송한 패킷의 순서가 처음과 다르게 뒤섞여 수신지에 도착하는 현상을 의미한다. 패킷 재배치는 불필요한 재전송이나 불필요한 혼잡 제어를 수행하여 TCP의 성능을 저하시킨다. 패킷 재배치에 의한 TCP 성능 저하를 막기 위해 다양한 접근 방법이 소개되었다. TCP-DAD는 기존 TCP에서 3으로 고정된 중복 응답 임계값을 동적으로 조절하여, 잘못된 혼잡 제어를 예방하고 있다. 일반적으로 전송한 패킷의 수가 많을 때, 패킷 재배치를 경험할 확률이 높으며, 패킷 재배치에 의해 잘못된 혼잡 제어가 일어날 가능성 많다. 고속 네트워크 환경에서는 혼잡 윈도우 크기 변화의 폭이 매우 크다는 점을 고려할 때, 중복 응답 임계값을 조절하는 TCP-DAD는 한계가 있다. 본 논문에서는 고속 네트워크 환경에서의 패킷 재배치 현상으로 인한 TCP 성능저하를 완화하기 위한 새로운 알고리즘 TCP-DT를 소개한다. 이는 중복 응답 수에 의존하지 않고 타이머를 통해 혼잡 제어를 수행하는 메커니즘 이다. 본 논문은 NS-2를 사용하여 고속 네트워크 환경에서의 시뮬레이션을 통해 제안한 TCP-DT의 성능 향상을 증명하였다.

• Culinary science and hospitality research
• /
• v.20 no.2
• /
• pp.214-231
• /
• 2014

This study was intended to investigate the alcohol drinking characteristics, Makgeolli drinking behavior, and perception of Makgeolli focusing on the Chinese students studying in Korea. 550 copies of self-administrated questionnaire for a survey were distributed from May 2nd to June 30th, 2012, and then 461 copies were adopted for the analyses. The drinking frequency and drinking amount at a time increased as the length of stay in Korea and monthly pocket money increased, and Makgeolli was second preferred, following beer. 97.5% of the students experienced drinking Makgeolli, the drinking rate and drinking amount of Makgeolli increased with the length of stay in Korea, and they mostly drank at restaurants and bars. Common motivations for drinking Makgeolli were taste and atmosphere while drinking it, and bad taste and headache were the most common reasons for disliking Makgeolli. The awareness of commercial Makgeolli types was low, and for the price and health promoting effects of Makgeolli, 92.4% and 85.8% of the students replied positively, respectively. These results suggest that the development of high quality Makgeolli adapted to the tastes of Chinese and relieving hangover, and advertising the health benefits would promote Makgeolli consumption in Chinese market.

• The Journal of the Korea Contents Association
• /
• v.16 no.2
• /
• pp.14-24
• /
• 2016

Recently, the sound design of the electric vehicle has emerged as one of the new research objects. This study was conducted to explore and examine major values of interior driving sound of the electric vehicle from the perspective of user experience. An exploratory study based on the ground theory extracted contextual information and quietness as independent variables, and then we analyzed the main and interaction effects of those two variables on the usefulness, emotion, and satisfaction through a $2{\times}2$ factorial experimental design. The experimental study demonstrated that the effect on the user experience of electric vehicle can be conditioned by the combination of contextual information sound and quietness. Based on the results of this study, we suggested future research agendas for the optimization of user needs which reflect individual preference of interior driving sound values.

• Journal of Digital Convergence
• /
• v.16 no.5
• /
• pp.213-220
• /
• 2018

The automobile industry in Korea is a very large industrial sector. Nowadays, as the interest in low carbon green growth grows all over the world, it is time to actively secure future competitiveness of the automobile industry. Therefore, it is essential to study consumer attitudes and intentions for electric vehicles at the time when technological and social changes are expected. This study was conducted to investigate the acceptability and preference of electric vehicle for 250 people. The results are as follows. As the monthly income and the number of residents increased, the decision was made to accommodate the electric vehicle. The larger the effect of the electric vehicle on the consumers, the more the electric car decided to accommodate the electric car. In addition, three demographic characteristics (monthly income, number of residents, residence type) showed that there was a difference in satisfaction of electric vehicles. As a result of analyzing the satisfaction level of the electric vehicle, it was found that the electric vehicle has a satisfactory effect on the consumer, the electric vehicle is about 3.5 times more satisfying, and the larger the interest of the electric car is, the more the electric car is about 2.1 times.