• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.29-35
• /
• 2002

Aeroelastic characteristics of a deployable missile control fin have been investigated. A deployable missile control fin is modeled by a 2-dimensional typical section. Supersonic Doublet-Point method is used for the computation of supersonic unsteady aerodynamic forces and Karpel's Minimum-State approximation is used for the aerodynamic approximation. Root-locus method and time-integration method are used for the linear and nonlinear flutter analyses. For the nonlinear flutter analysis the deployable hinge is represented by a asymmetric bilinear spring and is linearized by using the describing function method. From the flutter analyses, the effects of nonlinear parameters on the aeroelastic characteristics are investigated.

• Journal of Ocean Engineering and Technology
• /
• v.8 no.1
• /
• pp.123-130
• /
• 1994

일반적으로 규칙파 또는 불규칙파중에서의 반잠수식 해양구조물의 응답을 추정할때, 선형계에 적합한 주파수 영역해석법을 사용하고 있다. 대다수의 해양구조물은 Lower Hull과 단면적이 일정한 Column으로 구성되어 있지만, 만약 Column의 단면적이 홀수에 따라 변화한다면 복원력항에 비선형계를 적용해야만 한다. 따라서 본 논문에서는 비선형 복원력을 고려한 반잠수식 해양구조물의 응답을 추정할 수 있는 시간 영역 해석법을 개발하였다. 그리고, Column형상이 다른 5개의 모델을 선정하여, 이들의 시간 영역 해석결과와 주파수 영역 해석 결과를 서로 비교하였다. 또한 파랑외력으로서 불규칙파를 적용할 때, 비선형 복원력이 해양구조물에 응답에 미치는 영향을 조사 하였다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.1 s.13
• /
• pp.29-40
• /
• 1999

In vector GIS, natural linear entities (called linear entitles) are usually represented by a set of line segments. As an alternative of the line segments, curve segments can be used to represent the linear entities. The curve segments, as one-dimensional spatial objects, we generated by spline interpolation technique such as Bezier technique. In an effort to improve its accuracy in resembling the linear entities, the Bezier technique was modified generating a new technique (called New technique) (Kiyun, 1998). In this paper, validity of the New technique was tested. Test focused on answering two questions: (1) whether or not the curve segments from the New technique replace line segments so as to enhance the accuracy of representations of linear entities, and (2) whether or not the curve segments from the New technique represent the linear entities more accurately than curve segments from the Bezier technique. Answering these two questions entailed two hypothesis tests. For test data, a series of hydrologic lines on 7.5-minute USGS map series were selected. Test were done using t-test method and statistical inferences were made from the results. Test results indicated that curve segments from both the Bezier and New techniques represent the linear entities more accurately than the line segments do. In addition, curve segments from the New technique represent the linear entities more accurately than the line segments from the Bezier technique do at probability level 69% or higher.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.182-188
• /
• 1991

The modified arc-length algorithms for the automatic incremental solution of nonlinear finite element equations proposed by Riks are presented, which comprise the cylindrical arc-length method and the normal arc-length method. These methods are developed to trace the nonlinear path of large displacement problems such as a pre and post bucking/collapse response of general structures. These methods are applied to analyse the nonlinear behavior of arch and shell problems in parallel with the standard and modified Newton-Raphson method.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.5
• /
• pp.28-33
• /
• 2005

Nonlinear aeroelastic characteristics of a two dimensional typical section model with bilinear plunge spring are investigated. Doublet-point method(DPM) is used for the calculation of supersonic unsteady aerodynamic forces which are approximated by using the minimum-state approximation. For nonlinear flutter analysis structural nonlinearity is represented by an asymmetric bilinear spring and is linearized by using the describing function method. The linear and nonlinear flutter analyses indicate that the flutter characteristics are significantly dependent on the frequency ratio. From the nonlinear flutter analysis, various types of limit cycle oscillations are observed in a wide range of air speeds below or above the linear flutter boundary. The nonlinear flutter characteristics and the nonlinear aeroelastic responses are investigated.

• The Korean Journal of Rheology
• /
• v.9 no.3
• /
• pp.97-102
• /
• 1997

내피로성은 기계적 구조물로 사용되는 고분자재료에는 반드시 필요한 성질이며, 피 로거동은 재료특유의 비선형 동적 점탄특성과 아주 밀접한 관계가 있다. 본 연구에서는 피 로과정에서의 비선형 동적 점탄특성을 정량적, 연속적으로 측정할수 있는 시험 기기와 가해 준 변형에 대한 응답 응력파의 기본 응력파(선형적 응답)로부터의 차이를 직접 측정하여 이 를 규격화한 비선형 점탄성파라미터, NVP(Nonlinear Viscoelastic Parameter)라 명명한 새 로운 평가방법을 개발하였다. 그리고 고밀도 폴리에틸렌(HDPE) 배향물을 사용하여 그 평가 방법의 타당성을 조사한 결과 피로과정에서의 비선형동적 점탄특성을 나타내는 NVP가 증 가함에 따라 재료의 피로수명은 감소하였다. 따라서 NVP가 고분자재료의 내피로성을 평가 하는 척도로서 사용가능하다는 사실이 증명되었다. 또한 각 고조파 성분에대해 조사한 결과 인장형 피로시험양식에서는 고체입자 분산계의 전단변형에서 나타난 비선형 점탄성의 결과 와는 달리 2차 성분의 크기가 가장컸으며 NVP에의 기여도도 가장 크게 나타났다. 이는 변 형양식의 차이에 따른 결과를 볼수 있다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.3
• /
• pp.168-174
• /
• 1998

We have measured nonlinear refractive index and nonlinear absorption coefficient of optical materials by using a far-field phase modulation technique. The phase variation of the probe beam in the nonlinear material is transformed into the spatial phase modulation in the far-field so that the spatial distribution of the optical intensity in conjunction with the computer simulation analysis can give the nonlinear optical constants. We have obtained the nonlinear refractive indices and nonlinear absorption coefficient of $CS_2$ and $BaF_2$ by fitting the experimental values and numerical simulation analysis of far-field measurements. The nonlinear refractive indices of $CS_2$ and $BaF_2$were obtained as $1.2{\times}10^{-11}$ esu and $1.0{\times}10^{-13}$ esu, respectively at 616 nm, and the nonlinear absorption coefficient of BaF$_2$as $5.0{\times}10^{-11}$cm/W at 308nm. These measured values were in good agreement with previous reports.

• Survey Research
• /
• v.2 no.1
• /
• pp.59-71
• /
• 2001

We investigate design-based variance estimation methods of homogeneous linear estimator for population total under stratified multi-stage sampling. One method is unbiasedly estimating the first stage variance and the second stage variance separately in each stratum. And another is sub-sampling method that estimating the first stage variance only by using sub-sample selected from the second stage sample so that resulting estimator is unbiased for the total variance. The first is useful when the second stage unbiased estimator is available and the second is when the second stage variance is not estimable. For each case, we proposed a form of non-negative unbiased variance estimator. We expect the proposed variance estimation methods can be effectively used for many practical surveys.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.3
• /
• pp.107-115
• /
• 1997

비성형 동력학계로 모델링된 부유수송체의 동적응답을 조사하고 그 운동의 안정성을 해석하였다. 종동요 모우드의 고유주파수가 횡동요 모우드의 고유주파수의 두배가 되는, 즉, 2:1 내부공진 혹은 자기계수공진인 조건하에서, 이부유수송체는 한 운동 모우드의 직접가진에 의해 간접가진된 다른 모우드가 대진폭 응답을 보일 수 있음을 밝혔다. 또항, 종동요 모우드의 감쇠력은 비교적 넓은 범위의 운동에 대해 선형적임에 반해, 횡동요 모우드의 감쇠력은 점성의 영향이 대단히 커서 비선형성이 대단히 강한 것으로 알려져 왔다. 이 문제를 수학적으로 모델링하기 위하여, 종동요 모우드의 운동방정식에는 선형및 제곱형의 합의 형태인 감쇠력 모형을 사용하였다. 다중척도법을 사용하여 이 두가지 운동 모우드의 주기적 응답및 그의 안정성에 미치는 제곱형 비선형 횡동요 감쇠력의 영향을 밝혔다. 조우주기가 횡동요 모우드의 고유주기와 근사한 경우에 대하여 이 비선형계의 응답을 구하고 주파수-응답 곡선으로 나타내었다.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.175-185
• /
• 2011

Geometric information is a key element for evaluating traffic safety and road maintenance. This study developed an algorithm to identify horizontal alignment using global positioning system(GPS) and inertial navigation system(INS) data. Roll and heading information extracted from GPS/INS were utilized to classify horizontal alignment into tangent, circular curve, and transition curve. The proposed algorithm consists of two components including smoothing for eliminating outlier and a heuristic classification algorithm. A genetic algorithm(GA) was adopted to calibrate parameters associated with the algorithm. Both freeway and rural highway data were used to evaluate the performance of the proposed algorithm. Promising results, which 90.48% and 88.24% of classification accuracy were obtainable for freeway and rural highway respectively, demonstrated the technical feasibility of the algorithm for the implementation.