• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.113-113
• /
• 2010

유비쿼터스 시대를 맞이하여 현재의 전자제품은 초고주파 환경에서의 소형화된 마이크로파 소자를 요구하고 있다. 마이크로파 대역에서 세라믹 소재는 대부분의 폴리머 소재에 비해 낮은 유전손실 값을 보이고 있어 향후 확대되는 고주파화에 적합한 소재로 평가되고 있다. 하지만 세라믹 재료는 깨지기 쉬운 특성을 가지고 있어 공정 및 취급이 어려우며 높은 소결온도를 가지고 있어 융점이 낮은 재료와의 집적화에 있어서 난점을 가지고 있다. 이를 위해 본 연구실에서는 실온에서 세라믹을 비롯한 금속 및 폴리머 재료의 치밀한 코팅막의 성막 및 이종 접합이 가능한 Aerosol Deposition (AD 법)에 주목하였고 마이크로파 소자 제작 공정으로서 AD 법의 응용 가능성을 연구하였다. 마이크로파 소자의 기판으로서는 AD 법을 이용하여 유전손실이 낮고 플렉서블한 $Al_2O_3$-PTFE 혼합 기판을 제작하고 적용하였다. 금속 선로 패터닝 제작 공정으로는 도금법이 대표적이지만 고비용 및 복잡한 공정 절차, 폐화학용액으로 인한 환경문제 등의 단점을 지니고 있어 이를 대체하는 금속 선로 패터닝 공정이 절실히 요구되고 있다. 이를 위해 본 연구에서는 AD 법을 이용하여 금속 필름을 제작하고 대체 공정으로서의 가능성을 확인하였다. 하지만 AD 법을 이용한 세라믹 필름 제작에 관한 연구는 크게 활성화되어 있는 반면에 금속 필름의 제작, 특성 측정 및 개선에 관한 연구는 그에 비해 미비한 수준이다. 이를 위해 이번 연구에서는 AD 법을 이용하여 금속 필름을 성막 시에 영향을 미치는 요인을 고찰하였으며 또한 마이크로파 소자의 도체 손실에 크게 관계되는 금속 필름의 비저항 특성의 측정 및 개선에 관한 연구를 수행하였다. 이를 위해 본 연구에서는 정전장 시뮬레이션을 활용하여 AD 법으로 성막된 금속 필름의 정밀한 비저항 측정에 관한 연구방법을 마련하고 후열처리를 통한 비저항 특성을 개선시키는 연구를 진행하였다.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.9
• /
• pp.2378-2390
• /
• 1997

We, in this paper, have implemented E1 HDSL(high-bit-rate digital subscriber line) function over an ATM switching system. The maximum loop lengths for subscriber service and cell loss rates to meet the bit error rate of $10^{-7}$ at transmission of 2B1Q HDSL data of E1 rate over existing telephone copper wires in the presense of the significant impairments such as crosstalk, impulse noise, power line noise and longitudinal over the CSAs environment consisting of 26 gauge and 24 gauge unloaded copper telephone lines has assessed. We have confirmed the typical media services function such as video on demand(VOD) service for MPEG-1, image conference service and high-speed Internet access service over ATM switching system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.107-113
• /
• 2008

In 22.9[kV]-y distribution systems, underground cables are provided with multiple-point ground in which each coaxial-neutral line of the distribution cable lines(A, B, C phases) is 3-wire common grounded. In the underground cable distribution systems, circulating current flows in the coaxial-neutral lines and its magnitude amounts to about $40{\sim}50[%]$ load currents, even though loads are balanced. Power loss due to the circulating current consequently reaches to about 76[%] total losses occurred in all conductor lines. This power loss provokes additional temperature rise of the underground cable lines and finally results in 20[%] reduction of the current capacity of the cables. This paper presents a new ground method to overcome such a problem. The proposed method eliminates the circulating current flowing in the coaxial-neutral line effectively. Measurement results confirmed from the practical site-test show validity and effectiveness of this research.

• Journal of the Korean Magnetics Society
• /
• v.14 no.5
• /
• pp.174-179
• /
• 2004

Attenuation of conduction noise through microstrip line attached with the high lossy iron flakes-rubber composites has been investigated in GHz frequencies. Microstrip line was designed with characteristic impedance of 50 $\Omega$ and a length corresponding to the center frequency of 3 GHz. Iron flakes were fabricated by mechanical forging of spherical iron powders using an attrition mill. The fabricated microstrip line shows a ideal propagation characteristics of S$\sub$11/ < -60 dB and S$\sub$21/ = 0 dB. Attaching a noise absorbing sheet on the microstrip line, S$\sub$11/ increases to about -10 dB and S$\sub$21/ decreases to -20～-60 dB depending on the length of absorbing sheet. The calculated power loss is as high as 80% in the frequency range 2～8 GHz. It is suggested that the most critical material parameter is magnetic loss for the enhancement of noise attenuation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.25-29
• /
• 2017

This paper presents a hetero-integration of electrostatically actuated RF MEMS Switch and step up DC-DC converter on a redistribution layer using commercial PCB process. RF characteristics of Duroid with $56{\Omega}$ impedance GCPW transmission line and that of FR4 with $59{\Omega}$ impedance CPW transmission line were analyzed. From DC to 6GHz, RF characteristics of Duroid were better than that of FR4, insertion loss was 2.08dB lower, return loss was 3.91dB higher, and isolation was 3.33dB higher.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.1
• /
• pp.37-45
• /
• 1994

A method of optimal active and reactive power control for economic operation in electrical power system is presented in this paper. The major features and techniques of this paper are as follows: 1) The method presented for obtaining the equivalent active power balance equation applying the sparse Jacobian matrix of power flow equation instead of using B constant as active power Balance equation considering transmission loss, and for determining directly optimal active power allocation without repeating calculations. 2) More reasonable and economic profit by minimizing total fuel cost of thermal power plants instead of using transmission loss as objective function of reactive Power control can be achieved. 3) Particularly in reactive power control, computing time can be considerably reduced by using Fuzzy Linear Programming instead of using conventional Linear Programming.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1040-1049
• /
• 2006

A design method for minimizing transmission loss of a broadband right-angle transition from a coaxial cable to a microstrip line is presented. The right-angle transition has been widely used where printed circuit applications need to be fed from behind the ground plane using coaxial line. To obtain the minimized transmission loss over the whole operating frequency range of the transition, design parameters such as ground aperture and probe diameters, ground aperture offset, and stub length are optimized using a commercial electromagnetic simulation software. Results are presented for the optimum right-angle transition from an SMA connector to a microstrip line on common reinforced 0.787 mm thick PTFE substrates. Measurements of a fabricated transition show that reflection coefficient is less than -22 dB and insertion loss is less than 0.45 dB over $0.05{\sim}20GHz$.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.276-277
• /
• 2011

본 논문에서는 Reactive Power Tracing 기법을 이용하여 무효전력의 흐름을 분석한다. 이 기법은 Real Power Tracing을 기반으로, 무효전력의 특성에 맞게 변형시킨 것이다. 이를 위해 Real Power Tracing과 달리 무효전력의 손실을 고려하기 위해 모든 선로 사이에 가상 모선을 추가하게 된다. 이를 이용하여 국내 계통에 적용하여 무효전력의 흐름을 발전원측면에서 생산된 무효전력이 어느 범위까지 도달하는지 분석한다. 또한, 기존 민감도 해석과 차별화된 Reactive Power Tracing을 이용한 선로 사고에 대한 민감도 해석 방안을 제시한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.780-784
• /
• 2003

This parer propose a new method to calculate nodal price which is very useful data in electric market under non-optimal operation. To calculate nodal price, we employ marginal cost and power flow, and consider network loss, generator capability, and line capability. The proposed method is applied to the test system and the usefulness is verified.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.620-628
• /
• 1997

When the Chebyshev function is applied to design the waveguide transition, it exhibits poor impedance matching characteristics due to impedance discontinuities at the ends of tapered line. In this paper, an improved Chebyshev function, which is obtained by using the convolution property, is proposed to make improvements on the impedance matching characteristics of the waveguide transition. When rectangular to circular waveguide transition is designed by improved function, then the computed return loss is approximately 5 dB better than the conventional Chebyshev function.