• Journal of the Korean Geographical Society
• /
• v.36 no.2
• /
• pp.126-140
• /
• 2001

The influence of small urban parks(green ratio is 100%) on the temperature pattern over the urban and its surrounding area was examined by analyzing the case of in and around Changkyeong palace, Changdeok plalace and Jongmyo, Jongro-gu, Seoul. The pattern of temperature over urban parks and their surrounding built-up area was analyzed from September to November 2000, measuring maximum and minimum temperatures with fixed sensors(maximum and minimum thermometer)and real-time temperature depends largely on both the land-use type and the distance from the park border. In the case of maximum temperature, the lowest value appeared on the green area within parks and the highest value on the built-up area far from the green area. The maximum temperature difference between parks and built-up areas was up to $7.3^{\circ}C$. In the built-up area, the maximum temperature of commercial areas was higher than residential areas. In the night time, not only land-use type but also topography is important for the spatial distributlon of temperature because of the cold airflow from adjacet hills. The horizontal temperature profile by mobile measurement is also related to land-use type and to the distance from the park borders. There is a magnitude of $1^{\circ}C$ temperture difference over a distance of 200m and $3~4^{\circ}C$ over a distance of 400m from the park borders.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.3
• /
• pp.321-330
• /
• 2020

The purpose of this study is to present the appropriate standby space for the mechanical parking lot considered parking queue. This analysis is based on the field-study by results of the influential factors on the parking queue of mechanical parking lots in the commercial area of Gwang-ju metropolitan city. In this study, the parking queue was analized through the simple modeling using Vissim based on average service rate and average arrival rate from the result of field-study. As a result of applying the field survey products to the theoretical queue model, no significant result was obtained when the traffic intensity exceeded 1. Therefore, parking queue was analyzed through simple modeling using Vissim, and the model for calculating the proper parking queue size of the mechanical parking lot by size was derived. The model for estimating of an appropriate mechanical parking standby space considering parking queue presented in this study is expected to be a criterion for considering the appropriate parking space of a new building, and also it can be used to minimized the traffic impact due to the parking queue by the lack of standby space.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.111-121
• /
• 2018

RIn this research, digital elevation models, true-ortho image and 3-dimensional digital complied data was generated and evaluated using unmanned aircraft vehicle stereoscopic images by applying photogrammetric principles. In order to implement stereoscopic vision, digital Photogrammetric Workstation should be used necessarily. For conducting this, in this study GEOMAPPER 1.0 is used. That was developed by the Ministry of Trade, Industry and Energy. To realize stereoscopic vision using two overlapping images of the unmanned aerial vehicle, the interior and exterior orientation parameters should be calculated. Especially lens distortion of non-metric camera must be accurately compensated for stereoscope. In this work. photogrammetric orientation process was conducted using commercial Software, PhotoScan 1.4. Fixed wing KRobotics KD-2 was used for the acquisition of UAV images. True-ortho photo was generated and digital topographic map was partially produced. Finally, we presented error analysis on the generated digital complied map. As the results, it is confirmed that the production of digital terrain map with a scale 1:2,500~1:3,000 is available using stereoscope method.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.2
• /
• pp.85-102
• /
• 1998

The Changing Characteristics of Office Location in Central Seoul In recent years, central Seoul has been experiencing a dynamic transformation. In the process of reorganization of urban industrial structure including tertiarization and quaternarization of the economic base of Seoul, business services are growing very rapidly and large scale urban renewal projects are agilely implemented. Downtown office activities become a nucleus for economic performance of Seoul and high-rise office buildings steer the landscape transformation of central Seoul. Even though there appear to exist some evidences that office districts have dispersed to several subcenters, major office activities are still concentrated in the central Seoul. This paper redefines office industry in a narrow meaning comprising only relevant economic sectors and office buildings as office activity-functioning units. It then explores the industrial networking and territorial specialization of office activities focusing on the dual process of concentration and dispersion in Seoul. The changing characteristics of the downtown linkages of office activities in this post-industrial era transforms the spatial economy of central Seoul into more flexible and volatile, while territorial concentration of power and control functions are fortified at the same time. Finally, the paper addresses the development of manufacturing-tertiary-quaternary industrial complex, which can be regarded as new industrial clusters, selling cultural economy of urban space and possessing placeness or images for clients and customers, in relation to urban competitiveness and territorial specialization of large metropolitan areas.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.4
• /
• pp.549-563
• /
• 2008

The purpose of this research is to identify the urban structure in Korea. Though there is research regarding urbanization, there is little regarding the urban structure of the Korean economy. In this paper, two issues will be discussed: the measurements of inter-city and intra-city structure in Korean Metropolitan Statistical Areas (MSAs), which is newly defined. First, the city size rank rule, widely known as Zipf’s Law, will illustrate Korean the inter-city structure. The city size rank rule gives an idea whether Korean MSAs are balanced or not. In general, Korea has a heavy concentration in the Seoul MSA in terms of population. It could be either that the Seoul MSA is too big or that the Busan MSA is too small or both. If this is the primacy problem, a decentralization policy is necessary. On the other hand, if it is a second city problem, development policies for the Busan MSA and Daegu MSA are more important. Next, the Korean intra-city structure will be discussed. The evolutions of the MSAs explain intra-city structure by analyzing population density function and the housing price function. Some large MSAs such as Seoul and Busan have experienced urban sprawl, while other MSAs have experienced urban concentration. The population density gradient by the distance from the ARC GIS shows the growth rate of a city. According to the Spatial Mismatch Index between population and employment, the Ulsan MSA, Gwangju MSA, and Suwon-Hwaseong-Osan MSA are more mismatched, while the Daejeon MSA and Incheon MSA are less mismatched. Therefore, these analyses of Korean urban structure are meaningful in developing regional policy.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.73-78
• /
• 2009

100 households' survey was carried out in 2007 in Chitwan to foresee the people's livelihood and their insight into the forest conservation. This analysis revealed that households' was mainly survived with multiple livelihood categories where 98% citizens belong to food crops and 92% to livestock husbandry. The households' income shared by agriculture (crop and livestock), forest and remittance was 37% and 20% respectively. Results further showed that income distribution was somehow equal with Gini coefficient 0.25 than with the 0.37 of landholdings size. But, average per capita income of households was lower than the national standard with 33% of households below the poverty thresholds and 0.0945 poverty gap index. Similarly, 85% respondents assured for the current degraded status of forest and 83% of households for not participated in forest management activities due to low awareness in 82% households. These findings shows the forest assets could be unduly degraded in the past and forest availability which is extracting from the remaining forest is also decreasing in the area. Thus, tendency of forest dependency has been shifting to the small scale farming, other livelihood sources such as local business and services. This information could be useful in planning and decision-making process in searching of better alternative for the local livelihood as well as sustainable forest conservation strategy.

• Journal of Korean Society of Transportation
• /
• v.28 no.1
• /
• pp.15-24
• /
• 2010

Until now, the location and the size of gate are designed by only experience and intuitive use judgement. However there are no studies that investigated how many people will be using each subway gate depending on the location of gates. Therefore, the purpose of this study is to develop a gate choice model of subway station. The most critical element of a gate choice in subway station is the location of pedestrian's destinations. In this study, the development of the regression model is constructed from data of land use characteristic of station vicinity and the number of bus route and the space structure of station vicinity(Depth concept by Space Syntax analysis and total road length of station vicinity) by using the real data of 30 subway station in Seoul. This study found that subway pedestrian flow are mainly determined by three factors; the total floor space of commercial buildings, Total Depth(space structure index of station vicinity), and the number of bus route. The verification of a proposed model is done by using the real gate pedestrian data of two subway station in Seoul; Gang-nam and Yang-jae. The additional study of how to define the gate impact area is analysed. Therefore, this study will provide the theoretical bases in decision of gate location and size when a new subway station is opened in future.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1614-1618
• /
• 2007

분포형 수문모형은 유역을 격자단위로 세분화하여 매개변수를 부여하고, 증발산, 침투, 지표면유출, 중간유출, 지하수유출, 하도흐름 등 여러 가지 수문요소를 해석하는 종합적인 수문모형이다. 지표면에 내린 강우의 증발 및 침투, 유출은 토양수분의 함량에 크게 의존하게 된다. 따라서 토양수분에 대한 적절한 모의가 분포형 수문모형의 정확도를 좌우하는 핵심이라 할 수 있다. 토양수분은 식물의 생장 및 가용수자원 산정 등에 있어서 중요한 요소로서 토양층 상부의 수 미터 내에 존재하는 수분의 양을 일컫는다. 토양수분의 공간적 시간적 특성들은 증발, 침투, 지하수 재충전, 토양침식, 식생분포 등을 지배하는 매우 중요한 요소라 할 수 있다. 강우로 인한 지면과 지표하에서의 순간적인 포화공간의 형성 및 유출의 생성을 포함하는 과정과 증발산 등은 모두 비포화대(vadose zone) 혹은 토양층에서의 토양수분의 함량에 크게 의존하게 된다(이가영 등, 2005) 본 연구에서는 토양수분에 대한 정밀측정 자료가 있는 설마천 유역 범륜사 사면에 대하여 분포형 수문모형의 토양수분 해석 능력을 평가하고자 하였다. 토양수분 모의에 사용된 격자기반의 분포형 수문모형은 미공병단에서 개발한 GSSHA(USACE, 2006) 모형이다. 모형의 입력자료는 정밀토양도와 현장측정에 의한 토양매개변수를 반영하여 구축하였고, 강우 및 기상자료는 2003년 1월 1일 ${\sim}$ 2004년 12월 31일의 1시간 자료를 이용하였다. 모의기간 중 2003년은 초기 토양수분값 등 초기조건의 영향을 줄이기 위한 웜업 (Warm-up)기간으로 설정하였고, 2004년의 모의결과를 토양수분 관측값과 비교하였다.업지역, 상업지역 등과 같이 지형적 특성에 따른 유량측정망을 구축하는 것이다.의 의사결정 지원 도구가 될 것이다. 따라서, 본 연구에서는 도시유역의 물순환 해석을 위한 일련의 과정, 즉 자료의 조사 및 취득에서부터 물순환 해석 모형을 이용한 정량적 현황파악, 물순환 개선 기법 및 평가를 수행함에 있어 주요 착안점 및 실무에서의 기술적 가이드를 제공하고자 하였으며, 보다 세밀한 도시유역의 물순환 해석을 위하여 우리나라와 일본에서 적용이 활발한 물리적 기반의 분포형 모형(WEP, SHER, SWMM)의 적용사례를 통하여 국내 도시하천의 물순환 해석에 활용함에 있어서의 실질적인 적용절차 등을 제시하고자 하였다. 한다.호강유역의 급격한 수질개선을 알 수 있다.世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와 동년대에 동일한 목적으로 찬술되었음을 알 수 있다. $\ulcorner$경상도실록지리지$\lrcorner$(慶尙道實錄地理志)에는 $\ulcorner$세종실록$\lrcorner$(世宗實錄) $\ulcorner$지리지$\lrcorner$(地理志)와의 비교를 해보면 상 중 하품의 통합 9개소가 삭제되어 있고, $\ulcorner$동국여지승람$\lrcorner$(東國與地勝覽) 에서는 자기소와 도기소의 위치가 완전히 삭제되어 있다. 이러한 현상은 첫째, 15세기 중엽 경제적 태평과 함께 백자의 수요 생산이 증가하자 군신의 변별(辨別)과 사치를 이유로 강력하게 규제하여 백자의 확대와 발전에

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.1
• /
• pp.55-62
• /
• 2002

The upper wall-lower frame structures(mixed building structures) are usually composed of shear wall structure in the upper part of structure which is used as residential space and frame structure in the lower part of structure which is used as commercial space centering around the transfer system in the lower part of structure. These structures are characteristics of stiffness irregularity, mass irregularity, and vertical geometric irregularity. The purpose of this study is to investigate the nonlinear response characteristics and the seismic capacity of mixed building structures when the number of stories in the lower frame is varied. The conclusions of this study are following. 1) As the result of push-over analysis of structure such as roof drift(i.e. roof displacement/structural height) and base shear coefficient, when the stories of lower frame system are increased, base shear coefficient is decreased, but roof drift is increased. 2) According to an increase in stories of the lower fame, story drift and ductility ratio of upper wall system are decreased and behavior of upper wall system is closed to elastic. 3) When the stories of lower frame system are increased, the excessive story drift is concentrated on the lower frame system.

• Clean Technology
• /
• v.24 no.2
• /
• pp.99-104
• /
• 2018

In this work, we performed the methanation reaction using synthesis gas ($H_2/CO_2$) for the process to produce synthetic natural gas (SNG) for $4^{th}$ methanation reactor in SNG process proposed by RIST-IAE. Experimental conditions were changed with temperature, pressure and space velocity. At this time, $CO_2$ conversion, $CH_4$ selectivity and $H_2$ concentration after reaction were investigated. As a result, $CH_4$ selectivity by the $CO_2$ methanation increased with lower space velocity and higher pressure. On the other hand, in the case of temperature, the maximum value was shown at $320^{\circ}C$. From these results, it was found that the optimum condition of the fourth reactor suitable for the SNG process was obtained.