• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.313-318
• /
• 1997

Effects of the concentration of NaCl, the concentration and the molecular weight of chitosan on the permeability of capsule type fertilizer and herbicide were investigated. The encapsulating process was based on the electrostatic interaction between chitosan (a polycationic polymer) and sodium alginate (an anionic polysaccharide). Sodium alginate solution $(1\%)$ was dropped into chitosan solution $(1\%)$ in which various amounts of NaCl was added. The capsule strength was increased with the addition of NaCl and the maximum value of capsule strength was observed at 0.3M NaCl. Capsule type fertilizer and herbicide were immersed in deionized water to determine its permeability, and it was affected by the concentration of NaCl and chitosan, and the molecular weight of chitosan. As the concentration of NaCl in chitosan solution increased, permeability of the capsule increased and marked the maximum value of $ 88\%$(fertilizer), $87\%$ (herbicide) at 0.75M NaCl. As concentration of chitosan solution increased, permeability tended to decreased; it showed the maximum value of $90\%$ (fertilizer) and $90.3\%$ (herbicide) at $0.25\%$ chitosan and the minimum value of $83\%$ (fertilizer) and $82\%$ (herbicide) at $1\%$ chitosan. Permeability of fertilizer and herbicide also decreased, as the molecular weight of chitosan (material of capsule) was decreased; it was showed $86\%$ (fertilizer) and $83\%$ (herbicide) at M.W 330,000 (sonication time 0min) and $52\%$ (fertilizer) and $51\%$ (herbicide) at M.W 119,000 (sonication time 180 min). The chitosan-alginic acid capsule was manufactured (defined as prepared capsule), dried for 6 hrs and immersed in deionized water (defined as restored capsule) to examine restoration of capsule. Restoration of capsule was good, and capsule strength was slightly decreased form $20g/cm^2$ (prepared capsule) to $17g/cm^2$ (restored capsule)

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.175-187
• /
• 1997

Benthic community structure was studied in Chinhae Bay during 3 years from June 1987 to May 1990, based on the samples from 12 stations on the seasonal, bimonthly or monthly basis (lim and Hong, 1994a, b). A total of 287 species was sampled with mean density of $1045.5\;ind./m^2$ and biomass of $98.48g/m^2$ during studyperiods. Of these species, there were 91 species of crustaceans $(31.7\%)$, 88 of polychaetes $(30.7\%)$, 56 of molluscs $(19.5\%)$, 22 of echinoderms and 30 of the micellaneous species. Polychaetes were density-dominant faunal group with a density of $824.7\;ind./m^2$, comprising of $18.6\%$ of the total density of the benthic animals. It was followed by molluscs with $14.62\;ind./m^2$ $($14.4\%\;of\;the\;total\;density)$ crustaceans with $50.5\;ind/m^2\;(4.6\%)$ and echinoderms with $13.4\;ind/m^2\;(4.6\%)$. Molluscs were the biomass-dominant faunal group with a mean biomass of $54.62\;g/m^2$. It was followed by polychaetes with $21.74\;g/m^2$ and echinoderms with $6.66\;g/m^2$. Based on community analysis, species richness, diversity and evenness showed decreasing trends toward the inner bay from outer stations, whereas dominance showed increasing. The three most dominant species Lumbrineris longifolia, Paraprionospio pinnata and Theora fragilis had densities over $40\%$ of the total density of benthic organisms in Chinhae Bay. Seasonal changes of benthic communities in the inner bay were high compared to those of the outer bay. It was mainly due to the occurrence of hypoxic condition in the inner area of the bay. Cluster analysis showed that the benthic community could be divided into four stational groups, that is, Group 1, the innermost area, which received the most heavy anthropogenic effects including seawage and waste water, Group II, the central area of the bay, Group III, the transitional area, Group IV, the mouth pan of the bay exposed to the open sea. The areal groups based on the environmental factors coincided with the zonal groups from the species composition. This fact suggests that the overall spatial distribution of macrobenthos in Chinhae Bay was controlled by the sediment organic carbon content of the bay.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.3
• /
• pp.329-352
• /
• 2005

Long term observations of full-disk Lyman-o irradiance have been made by the instruments on various satellites. In addition, several sounding rockets dating back to the 1950s and up through the present have measured the $Lyman-{\alpha}$ irradiance. Previous full disk $Lyman-{\alpha}$ images of the sun have been very interesting and useful scientifically, but have been only five-minute 'snapshots' obtained on sounding rocket flights. All of these observations to date have been snapshots, with no time resolution to observe changes in the chromospheric structure as a result of the evolving magnetic field, and its effect on the Lyman-o intensity. The $Lyman-{\alpha}$ Imaging Solar Telescope(LIST) can provide a unique opportunity for the study of the sun in the $Lyman-{\alpha}$ region with the high time and spatial resolution for the first time. Up to the 2nd year development, the preliminary design of the optics, mechanical structure and electronics system has been completed. Also the mechanical structure analysis, thermal analysis were performed and the material for the structure was chosen as a result of these analyses. And the test plan and the verification matrix were decided. The operation systems, technical and scientific operation, were studied and finally decided. Those are the technical operation, mechanical working modes for the observation and safety, the scientific operation and the process of the acquired data. The basic techniques acquired through the development of satellite based solar telescope are essential for the construction of space environment forecast system in the future. The techniques which we developed through this study, like mechanical, optical and data processing techniques, could be applied extensively not only to the process of the future production of flight models of this kind, but also to the related industries. Also, we can utilize the scientific achievements which are obtained throughout the project And these can be utilized to build a high resolution photometric detectors for military and commercial purposes. It is also believed that we will be able to apply several acquired techniques for the development of the Korean satellite projects in the future.

• Cartoon and Animation Studies
• /
• s.30
• /
• pp.201-219
• /
• 2013

Development of digital media in education field at America, UK, Japan etc bring big progress on digital device if education. Japan bring huge progress on digital education by nationally. UK use huge a national budget at digital education development and Sweden which is advanced country of education and a welfare state. Especially UK and Sweden's digital education markets are full now aspect more high quality design. Korea which is advanced country of IT adopted digital text book 2007 with mathematics, through science and English digital text book through the state. Korea's digital text book is in a transition period. that needs case study of advanced country of education for setting design guide and educational effect to digital education media and device plan. All researches are based on LG europe design center at London. Analysis by using KJ method, survey of questionnaire, heuristic method at 4 schools in UK and Sweden. Through analytical researches want to more reality simulation at digital education, and high quality contents with digital socialization. co-work with analog, can get any where, anytime user want without any difficulty. Also interactive GUI design of digital education device to easy to access for user. When plan Digital text book content and design needs methodical design guide for target who students and environment an in-depth study of the appraisal and method. The results of the research are introduce the design plan as a basic research and giving useful design plan to make digital educational media in Korea industrial aspect.

• Cartoon and Animation Studies
• /
• s.30
• /
• pp.263-291
• /
• 2013

In this article, I analyze Korean Dong-in culture and its relationship with Yaoi, focusing on the changes in the 1990s. While Korean Dong-in culture has developed under the influence of Japanese Dojin culture, it is not well-known that Korean Dong-in culture has its own characteristics, reflecting the unique situations surrounding the Korean society. The reason that I pay attention to the changes in the 1990s is that they have created the foundation of the current Korean dong-in culture through changes such as the import and reception of Yaoi, the creation of 'virtual community' in PC telecommunication, the enforcement of Juvenile Protection Law, and the inauguration of 'Comic World,' Among them, the import and reception of Yaoi, a genre characterized by homosexuality including sexual relationship and fanwork, played a decisive role in the change of dong-in culture from manwha circle by highly motivated amatuer artists to fandom. The circumstances that original manhwa dong-in by manwha circle and Yaoi by manhwa fandom coexisted by the mid-1990s, the enforcement of Juvenile Protection Law and the lift of ban on Japanese popular culture rapidly weakened original manhwa dong-in. Also, the popularity of Comic World as a new type of dong-in events reflected the spread of fanwork as a new trend of Korean dong-in. In summary, the import and reception of Yaoi should be considered as one of the important changes in the 1990s Korean Dong-in culture, because 1) Korean women considered Yaoi as a liberating subculture by its powerful contents-homosexuality with sexual relationship, and 2) Yaoi succeeded in attracting new population favoring fanwork as a major trend in Korean Dong-in, differentiated from original manhwa circle population.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.631-638
• /
• 2010

The objective of this study was to evaluate the efficiency of zerovalent iron and basic oxygen furnace slag on arsenic stabilization in soils. For this, arsenic (V) contaminated soil and roxarsone contaminated soil were incubated after incorporation with zerovalent iron (ZVI) or basic oxygen furnace slage (BOFS) at four different levels (0%, 1%, 3%, and 5%) for 30 days and then the residual concentrations of arsenic were analysed following extraction with aqua reqia, 1N HCl and 0.01 M $CaCl_2$. The total concentration of arsenic was 2,285 mg/kg in the As(V) contaminated soil and 6.5 mg/kg in the roxarsone contaminated soil. 1 N HCl extractable arsenic concentration in the As(V) contaminated soil was initially 1,351 mg/kg and this was significantly declined by 713~1,034 mg/kg following incubation with ZVI while BOFS treatment showed no effect on the stabilization of inorganic arsenate except 5% treatment which showed around 100 mg/kg reduction in 1N HCl extractable arsenic. Similarly, in the roxarsone contaminated soil 1N HCl extractable concentration of arsenic was reduced from 3.13 mg/kg to 0.69 mg/kg with ZVI treatment increased from 1% to 5% while BOFS treatment did not lead to any statistically significant reduction. Available (0.01M $CaCl_2$ extractable) arsenic was initially 0.85 mg/kg in the As(V) contaminated soil and this declined by 0.79 mg/kg following incorporation with 5% ZVI, which accounted for more than 90% of the available As in the control. When As(V)-contaminated soil was treated with BOFS, the available arsenic was increased due to competing effect of the phosphate originated from BOFS with arsenate for the adsorption sites. For the roxarsone contaminated soil, the greater the treatment of ZVI or BOFS, the lower the available arsenic concentration although it was still higher than that of the control.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1007-1018
• /
• 2009

Hydrocyclone is widely used in industry, because of its simplicity in design, high capacity, low maintenance and operational cost. The separation action of a hydrocyclone treating particulate slurry is a consequence of the swirling flow that produces a centrifugal force on the fluid and suspended particles. In spite of hydrocyclone have many advantage, the application for treatment of urban stormwater case study were rare. We conducted a laboratory scale study on treatable potential of micro particles using hydrocyclone filter (HCF) that was a combined modified hydrocyclone with perlite filter cartridge. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particles sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin, road sediment, commercial area manhole sediment, and silica gel particles. Experimental studies have been carried out about the particle separation performance of HCF-open system and HCF-closed system. The principal structural differences of these HCFs are underflow zone structure and vortex finder. HCF was made of acryl resin with 120 mm of diameter hydrocyclone and 250 mm of diameter filter chamber and overall height of 800 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The operated maximum of surface loading rate was about 700 $m^3/m^2$/day for HCF-open system, and 1,200 $m^3/m^2$/day for HCF-closed system. It was found that particle removal efficiency for the HCF-closed system is better than the HCF-open system under same surface loading rate. Results showed that SS removal efficiency with the HCF-closed system improved by about 8~20% compared with HCF-open system. The average removal efficiency difference for HCF-closed system between measurement and CFD particle tracking simulation was about 4%.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.11
• /
• pp.835-860
• /
• 2013

Recently, the consumption of nanomaterials has been significantly increased in both industrial and commercial sectors, as a result of steady advancement in the nano-technologies. This ubiquitous use of nanomaterials has brought up the concern that their exposure to environments may cause detrimental effects on human health as well as natural ecosystems, and it is required to characterize their behavior in various environmental media and to evaluate their ecotoxicity. For the sake of accomplishing those assessments, the development of methods to effectively separate them from diverse media and to quantify their properties should be requisitely accompanied. Among a number of separation techniques developed so far, this study focuses on Field-Flow Fractionation (FFF) because of its strengths, such as relatively less disturbance of samples and simple pretreatment, and we review overseas and domestic literatures on the separation of nanomaterials using the FFF technique. In particular, researches with Flow Field-Flow Fractionation (FlFFF) are highlighted due to its most frequent application among FFF techniques. The basic principle of the FlFFF is briefly introduced and the studies conducted so far are classified and scrutinized based on the sort of target nanomaterials for the purpose of furnishing practical data and information for the researchers struggling in this field. The literature review suggests that the operational conditions, such as pretreatment, selection of membrane and carrier solution, and rate (velocity) of each flow, should be optimized in order to effectively separate them from various matrices using the FFF technique. Moreover, it seems to be a prerequisite to couple or hyphenate with several detectors and analyzers for quantification of their properties after their separation using the FFF. However, its application has been restricted regarding the types of target nanomaterials and environmental media. Furthermore, domestic literature data on both separation and characterization of nanomaterials are extremely limited. Taking into account the overwhelmingly increasing consumption of nanomaterials, the efforts for the area seem to be greatly urgent.

• Journal of Nutrition and Health
• /
• v.53 no.5
• /
• pp.488-502
• /
• 2020

Purpose: This study examined the factors influencing Nutrition Quotient for adults (NQ-A), focusing on workers in the manufacturing industry. Methods: The participants were 738 industrial workers in Gwangju. Their dietary information was analyzed using a questionnaire of NQ-A, which consisted of 21 checklist items and the general characteristics of the subjects. The scores of NQ-A and its 4 factors (balance, moderation, diversity, and dietary behavior) were calculated according to the general characteristics of subjects. The data were analyzed using a χ² test, t-test, correlation, and multiple regression using SPSS 21.0 program. Results: The mean NQ-A score was 45.3 for the total subjects, indicating a low grade. Non-shift workers showed significantly higher scores for balance, diversity, and moderation factors than shift workers. Forty-three (8.7%) shift workers and 123 (50.8%) non-shift workers had good NQ-A scores, whereas 453 (91.3%) shift workers and 119 (49.2%) non-shift workers required monitoring for nutrition. The significant influencing factors of NQ-A were the working pattern (p < 0.001), gender (p < 0.001), family composition (p < 0.001), age (p < 0.001), and household income (p < 0.001). As a result of multiple regression analysis, there was a significant difference in the NQ-A score for moderation (F = 141.930, p < 0.001), diversity (F = 98.998, p < 0.001), balance (F = 52.329, p < 0.001), and dietary behavior (F = 12.895, p < 0.001). As a result, shift work and gender had the greatest influence on the balance (β = -0.372, p < 0.001), diversity (β = -0.316, p < 0.001), and moderation (β = -0.507, p < 0.001) factors in NQ-A. Gender had the most influence on the dietary behavior in NQ-A. Conclusion: Shift work and gender were significant factors affecting NQ-A. To manage workers' health better, it will be necessary to prepare a nutrition education program according to the type of working pattern and gender.

• Journal of Distribution Research
• /
• v.17 no.5
• /
• pp.39-57
• /
• 2012

The unabated influx of micro businesses has turned the Korean retailing market to a rat race, which causes severe financial distress for micro business owners due to heavy competition. The woes of these micro business owner's are exacerbated by the presence of large scale distributors such as Super Supermarket(SSM) and large discount stores. In summary, the Korean retail market is overburdened an uneconomically viable. Retailing has low barriers to entry which attracts unskilled labor or those with little capital. These start-ups have low opportunity costs since they would make low wages elsewhere in the economy. Thus, these owners are content with relatively low returns on their investment. These 'subsistence ventures' are maintained for economical viability rather than economic growth. These 'subsistence ventures' intensifies competition among small-scale businesses. The presence of large retail corporations also aggravates the situation. The recent stagnation of the economy has worsened the retail market in Korea. The overwhelming competition solidifies the coarse structural system and the prolonged economic sluggishness has increased the risk of insolvency for micro business owners. As the economy continues to stagnate, the imminent risk in retailing market will rise up to surface threatening economic stability. More systematic inflows and outflows of retailers are required in order to redress this structural problem. It has been empirically shown that the self-employment rate is high in Korea compared to other OECD countries. To draw the comparison of self-employment rate by industry, Korea shows high rates among transportation, whole sale, retail, education, lodging, and restaurants. In the case of the transportation and education service sectors, this high rate can be explained by the idiosyncratic nature of Korean culture. In the transportation sector, political policies favor private cap service and private freight carriers. In the education service sector, Koreans put particular emphasis on education that leads to many private institutions that outnumber other OECD countries. For these singular reasons, Korea maintains high micro business, self-employed rates particularly in retailing. A comparable nation is Japan, with its similar social, economic, cultural environment among OECD countries. Unlike Korea, Japan has much lower rates of micro business which continues to decrease. Also Korean retailers are much more destitute than Japanese. The fundamental problem of Korean retailing is the involuntary exit of these 'subsistence ventures,' micro businesses with low margins, in which a small drop in demand can lead to financial difficulties for the owner. This problem will be exacerbated when Korean babyboomers retire and join the micro business ventures. The first priority in order to cope with the severity of oversupply in retailing is to provide better opportunities for the potential self-employers. There should be viable alternatives to subsistent ventures. Strengthening the retirement program, scrutiny of exit process, reconfiguration of policy funds are the recommendations.