• Korean Journal of Environmental Biology
• /
• v.25 no.3
• /
• pp.223-227
• /
• 2007

Crop loss and damage by wildlife are becoming more serious to residents inside and around National Parks of Korea annually. It could be caused by small size of Parks, which is couples of ten $km^2$ only, and more than a third of total parks' areas are belonging to privates. Wild boar (Sus scrofa) is one of the most harmful pests in nationwide. Treading down crop field using as bedding or resting site are major damaged types and foraging behavior is following. Besides of boars, Korean water deer (Hydropotes inermis), racoon dog (Nyctereutes procyonoides), and badger (Meles meles) are another serious pests. Mainly, farm products planted in upland, such as corns, sweet potatoes, cabbages, etc. are harmed easily, a rate reaches up to 76.9% of whole losses. 92.4% (n=187) of interviewees, who are mostly seniors, cultivate small crop fields smaller than 1 ha. Crop damage would be started from June to late November, time differences are happened due to latitude, climate condition, and crop differences of National Parks. Dusting animal repellents are easier and widespread methods to prevent animal foraging to crop fields and installing noisy makers using gun powder and setting up scarecrows are traditional methods for repelling animals. Nevertheless, effects of these self-defence are turned out to be useful soon after labors done only. Since legal compensation for crop damages by wildlife are not prepared systematically so far, crop loss are rarely reported to local government by most farmers. Systematic and objective methods for quantifying of crop loss by wildlife and population managements system should be offered urgently to well-managed animals habitat and residents' living inside National Parks.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.3
• /
• pp.393-400
• /
• 2009

Recently demand for the 3D modeling technology to reconstruct real world is getting increasing. However, existing geospatial data are mainly based on the 2D space. In addition, most of the geospatial data provide geometric information only. In consequence, there are limits in various applications to utilize information from those data and to reconstruct the real world in 3D space. Therefore, it is required to develop efficient 3D mapping methodology and data for- mat to establish geospatial database. Especially digital elevation model(DEM) is one of the essential geospatial data, however, DEM provides only spatially distributed 3D coordinates of the natural and artificial surfaces. Moreover, most of DEMs are generated without considering terrain properties such as surface roughness, terrain type, spatial resolution, feature and so on. This paper suggests adaptive and flexible geospatial data format that has possibility to include various information such as terrain characteristics, multiple resolutions, interpolation methods, break line information, model keypoints, and other physical property. The study area was categorized into mountainous area, gently rolling area, and flat area by taking the terrain characteristics into account with respect to terrain roughness. Different resolutions and interpolation methods were applied to each area. Finally, a 3D digital map derived from aerial photographs was integrated with the geospatial data and visualized.

• Journal of the Korean association of regional geographers
• /
• v.16 no.4
• /
• pp.339-354
• /
• 2010

In this study, diurnal and intra-seasonal variations of summertime temperature lapse rate (TLR) by synoptic weather conditions in a mountainous basin are examined based on hourly temperature data observed in 2009 summer at an Automatic Weather Station (AWS) network deployed in Haean basin (called Punch Bowl), Yanggu in the Republic of Korea. Summertime average TLR between the top and bottom of the basin is $-0.53^{\circ}C$/100m. Due to its diurnal variations, TLR shows the lowest by $-0.25^{\circ}C$/100m at 6AM, while it maximizes up to $-0.85^{\circ}C$/100m between 4PM~5PM. Comparisons of daily average TLRs by synoptic weather patterns reveal that the magnitude of TLRs is greatest in the order of rainy days ($-0.63^{\circ}C$/100m), heavy rainfall days ($-0.53^{\circ}C$/100m), partly cloudy days ($-0.47^{\circ}C$/100m), and sunny days ($-0.39^{\circ}C$/100m). At dawn on sunny days in summer, strong cooling pools accompanying temperature inversion layers are formed within the basin, while on heavy rainfall days, warming pools are observed due to relatively low TLRs associated with the reduction of surface radiation cooling by clouds.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.618-627
• /
• 2019

An increase in damage to crops and facilities caused by wildlife such as wild boar causes serious social and economic problems to the rural economy in Korea. This study aims to estimate the economic losses incurred to rural households in mountain villages near protected areas in Korea due to the damage to agricultural and forestry production by wildlife. The case of mountain villages located in Toji-myeon, Gurye-gun near the Jirisan National Park was studied as an example. Data were collected by interviewing 84 households across six mountain villages in April and June 2016. The results indicate that the economic losses due to wildlife damage in 2015 were estimated to be 1.65 million KRW per household, which is a total of 138.63 million KRW for the 84 households. Among local products, the most damaged products were chestnut, fern-brake, wild pear, peach, and potato, whereas the most damaged products per production area were sweet potato, peach, corn, and potato. The potential economic losses caused by wildlife damage to agricultural and forestry production in whole Gurye-gun area was estimated to be around 4.0 billion KRW in 2015. However, the municipal government budget for the compensation of wildlife damage was only 0.9 percent of the potential rural economic losses caused by wildlife damage in 2015. The results of our study suggest that the compensation scheme for wildlife damage is inadequate in the respect of social justice. Considering the low financial capacity of the municipalities in mountain areas, the central government should take a progressive responsibility by allocating more financial resources for compensation of economic losses of rural households due to wildlife damage. The equitable and effective governance of wildlife conservation is required for sustainable development of rural communities near protected areas.

• Journal of Korea Water Resources Association
• /
• v.54 no.1
• /
• pp.27-38
• /
• 2021

Recently, many studies have been conducted to use the radar rainfall in hydrology. However, in the case of weather radar, the beam is blocked due to the limitation of the observation such as mountain effect, which causes underestimation of the radar rainfall. In this study, the radar rainfall was estimated using the Hybrid Sacn Reflectivity (HSR) technique for hydrological use of weather radar and the runoff analysis was performed using the GRM model which is a distributed rainfall-runoff model. As a result of performing the radar rainfall correction and runoff simulation for 5 rainfall events, the accuracy of the dual-polarization radar rainfall using the HSR technique (Q_H_KDP) was the highest with an error within 15% of the ground rainfall. In addition, the result of runoff simulation using Q_H_KDP also showed an accuracy of R2 of 0.9 or more, NRMSE of 1.5 or less and NSE of 0.5 or more. From this study, we examined the application of the dual-polarization radar and this results can be useful for studies related to the hydrological application of dual-polarization radar rainfall in the future.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.15-24
• /
• 2021

In Korea, which is mostly mountainous, the proportion of tunnel and underground space development are increasing. Although the ground is reinforced by applying the ground improvement method during underground space development, accidents still occur frequently in Korea. In the grouting method, a representative ground reinforcement method, the effect was judged by comparing the total amount of injection material with the amount of injection material used during the actual grouting construction. However, it is difficult to determine whether the ground reinforcement is properly performed during construction or within the target ground. In order to solve this problem, it is necessary to study a new method for quality control during or after construction by measuring electrical resistivity after performing grouting by mixing carbon fiber, which is a conductive material, and microcement, which is a grout material. In this study, as a basic study, a cement specimen mix ed with 0%, 3%, 5%, 7% of carbon fiber was prepared to evaluate the performance of the grout material mixed with carbon fiber, which is a conductive material. The prepared specimens were wet curing for 3 days, 7 days, and 28 days under 99% humidity, and then compression wave velocity and shear wave velocity were measured. As a result of the compression wave velocity and shear wave velocity measurement, it showed a tendency to increase with the increase in the compounding ratio of carbon fibers and the number of days of age, and it was confirmed that the elastic modulus and shear modulus, which are the stiffness of the material, also increased.

• Journal of the Korean earth science society
• /
• v.41 no.2
• /
• pp.95-110
• /
• 2020

Comparisons between two different surface temperatures from high-resolution ECMWF ReAnalysis 5 (ERA5) and Automated Synoptic Observing System (ASOS) observations were performed to investigate the reliability of the new reanalysis data over South Korea. As ERA5 has been recently produced and provided to the public, it will be highly used in various research fields. The analysis period in this study is limited to 1999-2018 because regularly recorded hourly data have been provided for 61 ASOS stations since 1999. Topographic characteristics of the 61 ASOS locations are classified as inland, coastal, and mountain based on Digital Elevation Model (DEM) data. The spatial distributions of whole period time-averaged temperatures for ASOS and ERA5 were similar without significant differences in their values. Scatter plots between ASOS and ERA5 for three different periods of yearlong, summer, and winter confirmed the characteristics of seasonal variability, also shown in the time-series of monthly error probability density functions (PDFs). Statistical indices NMB, RMSE, R, and IOA were adopted to quantify the temperature differences, which showed no significant differences in all indices, as R and IOA were all close to 0.99. In particular, the daily mean temperature differences based on 1-hour-averaged temperature had a smaller error than the classical daily mean temperature differences, showing a higher correlation between the two data. To check if the complex topography inside one ERA5 grid cell is related to the temperature differences, the kurtosis and skewness values of 90-m DEM PDFs in a ERA5 grid cell were compared to the one-year period amplitude among those of the power spectrum in the time-series of monthly temperature error PDFs at each station, showing positive correlations. The results account for the topographic effect as one of the largest possible drivers of the difference between ASOS and ERA5.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.39-50
• /
• 2014

This paper reviews the results of recent observations in the Yeonsuri valley of Mt. Youngmun during springtime (March to May) in 2012. Automated weather stations were installed at twelve sites in the valley to measure temperature and 2, 3 dimensional wind. We examined temporal and spatial characteristics of temperatures and wind data. The Yeonsuri valley springtime average temperature lapse rate between the top and bottom of the entire period is $-0.44^{\circ}C/100$ m. It can be changed by the synoptic weather conditions, the lapse rates is greatest in order of clear days ($-0.48^{\circ}C/100$ m), rainy ($-0.41^{\circ}C/100$ m) and cloudy days ($-0.40^{\circ}C/100$ m). In the night, the temperature inversion layer (thermal belt) and the cold pool are formed within the valley. In addition, we measured temperature and wind distribution from the bottom to 3.5 m, the cold layers existed up to 1.5 m, which were affected by ground mixed layer. The results will provide useful guidance on agricultural practices as well as model simulations.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1043-1059
• /
• 2021

Forest and agricultural land are very important factors in the environmental ecosystem and securing food resources. Forest and agricultural land should be monitored regularly. CAS500-4 data are expected to be effectively used as a supplement of monitoring forest and agricultural land. Prior to the launch of the CAS500-4, the relative canopy height error analysis of the digital elevation model on South Korea was performed to determine the vertical target accuracy. Especially, by considering area of interest of the CAS500-4 (mountainous or agricultural area), it is conducted that vertical error analysis according to the slope and canopy. For Gongju, Jeju, and Samcheok, the average root mean squared differences were calculated compared to the drone LiDAR digitalsurface models, which were filmed in autumn and winter and the 5 m digital elevation model from the National Geographic Information Institute. As a result, the Shuttle radar topography mission digital elevation model showed a root mean squared differences of about 8.35, 8.19, and 7.49 m, respectively, while the Copernicus digital elevation model showed a root mean squared differences of about 5.65, 6.73, and 7.39 m, respectively. In addition, the root mean squared difference of shuttle radar topography mission digital elevation model and the Copernicus digital elevation model according to the slope angle were estimated on South Korea compared to the 5 m digital elevation model from the National Geographic Information Institute. At the slope angle of between 0° to 5°, root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model showed 3.62 and 2.52 m, respectively. On the other hands root mean squared differences of the Shuttle radar topography mission digital elevation model and the Copernicus digital elevation model respectively showed about 10.16 and 11.62 m at the slope angle of 35° or higher.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.201-210
• /
• 2019

Recently, due to the efforts to mitigate traffic congestion and expansion of space efficiency, the construction of underground roads has been increased in big-scale cities. Since tunnels in the city have a higher chance for a fire leading to a great tragedy during a severe traffic jam than mountain tunnels, it is highly likely that it will be constructed as a tunnel, having a small cross section, for small vehicles. However, if they are constructed as such small-vehicle tunnels, it would be possible to reduce the design fire intensity while the concentration of harmful gases would increase due to a reduction in the small cross sectional area, led by a decrease in the tunnel height. In this study, behaviors of fire smoke by the installation interval and format of large-scale exhaust-gas ports were examined and compared in the analysis of temperatures and CO concentrations of a tunnel and its results were as the following. Although there were no significant differences in the smoke spreading distance between installation intervals, but in this study, 100 m was found to be the most effective installation interval. The smoke exhaustion performance was found to be excellent in the order of $4m{\times}3m$, $6m{\times}2m$, and $3m{\times}2m$ (2 lane) of the smoke spreading distance. Although there was no significant difference in the smoke spreading distance between formats of large-scale exhaust-gas ports, it was found that the smoke spreading distance was larger than other cases when it was $3m{\times}2m$ in the fire growing process. The analysis of smoke spreading distances by the aspect ratio showed that a smoke spreading distance was shorted when its the smoke spreading distance was found to be shorter when its traverse distance was relatively longer than its longitudinal distance.