• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.278-278
• /
• 2021

가뭄이 장기간 지속되어 농업적 가뭄 상태가 되면 토양의 수분이 마르기 시작하면서, 식생의 생장활동이 방해되고, 이는 식생의 광합성 활동까지 영향을 미친다. 광합성을 통해 대기 중의 이산화탄소가 흡수되고 산소 발생이 증가하는데, 광합성이 활발하지 못하면 상대적으로 대기 중의 이산화탄소 농도가 증가한다. 본 연구에서는 이러한 토양수분, 식생활동과 대기 중 이산화탄소의 농도의 관계를 다중분광센서인 MODerate resolution Imaging Spectroradiometer (MODIS) 산출물을 이용하여 분석하였다. 기존 토양수분의 경우, 마이크로파 센서를 통해 산출된 값을 활용했지만, 이는 상대적으로 공간 해상도가 조악하다는 단점을 갖고 있어서 면적이 작은 연구지역을 분석할 때에는 한계점을 갖고 있다. 이러한 문제를 해결하기 위하여 상대적으로 고해상도인 광학센서를 이용한 토양수분 산정 방법을 적용하였다. 또한, MODIS 총 일차생산량 (Gross Primary Productivity, GPP) 산출물을 이용하여 식생 호흡량과의 관계식을 통해 이산화탄소 플럭스를 계산하였다. 원격탐사 기반의 토양수분, 식생지수, 이산화탄소 플럭스를 한국에서 발생한 가뭄 기간 중, 2014년과 2015년도에 대하여 지점 관측자료인 플럭스 타워에서 제공되는 값과 비교 분석하였다. 분석한 결과 토양수분, 식생 지수, 탄소플럭스는 순차적으로 지연시간을 두고 상관성이 발생함을 확인하였다. 토양수분과 식생 지수 사이에는 1개월, 식생지수와 탄소플럭스는 0.5개월의 지연시간 후에 가장 높은 상관성을 보였다.

• Applied Chemistry for Engineering
• /
• v.30 no.6
• /
• pp.719-725
• /
• 2019

In this study, activated carbon fibers were treated with oxygen plasma to investigate gas sensing properties of the dimethyl methylphosphonate (DMMP), which is a simulant gas of the chemical warfare agent, according to oxygen functional group contents. As the flow rate of oxygen plasma treatment increased, oxygen groups were introduced to the surface of activated carbon fibers from 6.90 up to 36.6%, increasing the -OH group which influences the DMMP gas sensing properties. However, as the flow rate of oxygen plasma increases, the specific surface area tends to decrease because etching on the surface of activated carbon fibers occurs due to active species generated during the oxygen plasma treatment. The resistance change rate of the DMMP gas sensor increased from 4.2 up to 25.1% as the oxygen plasma treatment flow rate increased. This is attributed to the hydrogen bonding between DMMP gas and introduced hydroxyl functional group on activated carbon fibers by the oxygen plasma treatment. Therefore, the oxygen plasma is considered to be one of the important surface treatment methods for detecting chemical warfare agents at room temperature.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.1-7
• /
• 2018

Tin dioxide, $SnO_2$, is applied as an anode material in Li-ion batteries and a gas sensing materials, which shows changes in resistance in the presence of gas molecules, such as $H_2$, NO, $NO_2$ etc. Considerable research has been done on the synthesis of $SnO_2$ nanostructures. Nanomaterials exhibit a high surface to volume ratio, which means it has an advantage in sensing gas molecules and improving the specific capacity of Li-ion batteries. In this study, $SnO_2$ nanostructures were grown on a Si substrate using a thermal CVD process with the vapor transport method. The carrier gas was mixed with high purity Ar gas and oxygen gas. The crystalline phase of the as-grown tin oxide nanostructures was affected by the oxygen gas flow rate. The crystallographic property of the as-grown tin oxide nanostructures were investigated by Raman spectroscopy and XRD. The morphology of the as-grown tin oxide nanostructures was confirmed by scanning electron microscopy. As a result, the $SnO_2$ nanostructures were grown directly on Si wafers with moderate thickness and a nanodot surface morphology for a carrier gas mixture ratio of Ar gas 1000 SCCM : $O_2$ gas 10 SCCM.

• Journal of Sensor Science and Technology
• /
• v.1 no.2
• /
• pp.173-181
• /
• 1992

Tantalum pentoxide($Ta_{2}O_{5}$) thin films on p-type (100) silicon wafer were fabricated by RF reactive sputtering. Physical properties and structure of the specimens were examined by XRD and AES. From the C-V analysis, the dielectric constant of $Ta_{2}O_{5}$ films was in the range of 10-12 in the reactive gas atmosphere in which 10% of oxygen gas is mixed. The ratio of Ta : 0 was 1 : 2 and 1 : 2.49 by AES and RBS examination, respectively. The heat-treatment at $700^{\circ}C$ in $O_{2}$ ambient led to induce crystallization. When the heat-treatment temperature was $1000^{\circ}C$, the dielectric constant was 20.5 in $O_{2}$ ambient and 23 in $N_{2}$ ambient, respectively. The crystal structure of $Ta_{2}O_{5}$ film was pseudo hexagonal of ${\delta}-Ta_{2}O_{5}$. The flat band voltage shift(${\Delta}V_{FB}$) of the specimens and the leakage current density were decreased for higher oxygen mixing ratio. The maximum breakdown field was 2.4MV/cm at the oxygen mixing ratio of 10%. The $Ta_{2}O_{5}$ films will be applicable to hydrogen ion sensitive film and gate oxide material for memory device.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.376.2-376.2
• /
• 2014

마이크로볼로미터 적외선 센서는 인체감지, 전자부품의 품질검사, 에너지 절감, 산업시설감시 및 군사용으로 다양하게 적용되고 있다. 기존에 이러한 적외선 센서의 감지재료로 VOx 또는 비정질 Si이 가장 많이 사용되고 있으며, VOx는 감도가 높고, 세계적으로 가장 많이 사용되고 있는 물질이다. 본 연구에서는 기존의 VOx 박막 증착법을 개선하여 Zn 산화물 박막을 혼용한 적외선 감지재료를 이용한 마이크로볼로미터 제작 및 특성에 대해 보고한다. RF sputtering 방법으로 약 140 nm의 VOx/ZnO/VOx 샌드위치 박막을 증착하고, 산소분위기에서 열처리함으로써 온도저항계수(TCR)가 약 -3.0 %/K의 값을 갖는 특성을 구현하였다. 갓 증착된 V-Zn 박막에서는 XRD 스펙트럼에서는 V2O5 관련 피크가 주로 관측되었으며, 산소열처리에 의해 VO2 피크가 새롭게 관측되었다. 볼로미터 감지소자는 유효면적 $50{\times}50{\mu}m^2$ 으로 bulk micromaching 공정을 통해 제작하였다. Si 기판위에 SiNx 박막을 PECVD 장치를 이용하여 증착하였으며, 적외선 감지층으로 V-Zn 산화물을 RF sputtering 방법으로 증착하여 열처리 후 SiNx passivation 박막으로 보호하였다. 열적고립을 위해 패터닝 후 Si 기판을 KOH 용액을 이용하여 약 $20{\mu}m$ 식각하여 소자를 구현하였다. 제작된 소자의 특성을 평가한 결과 반응도는 1.57e+4 V/W, 탐지도는 $8.79e+7cmHz^{1/2}/W$를 얻을 수 있었다. 소자의 동작 특성을 평가하기 위해 진공 압력을 1e-3 torr 이하에서 thermoelectric cooler를 장착한 metal package를 제작하여 동작온도에 따른 특성을 평가하였다. 동작온도를 $10^{\circ}C{\sim}40^{\circ}C$로 하여 측정한 결과 동작온도가 증가할수록 신호전압은 감소함을 알 수 있었다.

• Journal of Sensor Science and Technology
• /
• v.21 no.3
• /
• pp.229-234
• /
• 2012

The existing permeability measurements based on pressure differential between the polymer membrane that is permeable to measure the amount of oxygen used, but these methods must be kept in a vacuum, and the measurement of the membrane with low permeability in the membrane is too time consuming. In recent years by using electrochemical method polymer membrane currents caused by the amount of oxygen is a measure of how much is used. In this study, apparatus consisting of one anode and six cathodes for multi-oxygen permeability tester used the same number of membranes produced by electrochemical oxygen permeation characteristics. In this study, one silver/silver chloride anode electrochemical method with a hexagonal sensor to put various kinds of polymer membranes with the six oxygen permeability for simultaneous measurement in real-time systems. Six cathodes (Pt), and one of the coil-shaped anode (Ag/AgCl) to form a hexagonal one of the polarographic oxygen sensor in a single measurement system by six sensors. Each sensor for making hexagonal specificity of the sensor to compensate for the conditions obtained in a pure nitrogen gas and pure oxygen gas conditions. With this study, self-developed hexagonal sensor capable of measuring sensors and oxygen permeability tester, for a multi-six different oxygen permeability characteristics of the membrane measured at the same time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.5
• /
• pp.1303-1310
• /
• 2010

Recently, researches related with automative mechanism have been widely studied to increase the driver's safety by continuously monitoring the driver's health condition to prevent driver's drowsiness. This paper describes the design of wearable chest belt for ECG and reflectance pulse oximetry for SpO2 sensors based on wireless sensor network to monitor the driver's healthcare status. ECG, SpO2 and heart rate signals can be transmitted via wireless sensor node to base station connected to the server. Intelligent monitoring system is designed at the server to analyze the SpO2 and ECG signals. HRV (Heart Rate Variability) signals can be obtained by processing the ECG and PPG signals. HRV signals are further analyzed based on time and frequency domain to determine the driver's drowsiness status.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.545-548
• /
• 2009

Recently, researches related to automative mechanism have been widely studied to increase the driver's safety by continuously monitoring the driver's health condition to prevent driver's drowsiness. This paper describes the design of wearable chest belt for ECG and reflectance pulse oximetry for $SpO_2$ sensors based on wireless sensor network to monitor the driver's healthcare status. ECG, $SpO_2$ and heart rate signals can be transmitted via wireless sensor node to base station connected to the server. Intelligent monitoring system is designed at the server to analyze the $SpO_2$ and ECG signals. HRV(Heart Rate Variability) signals can be obtained by processing the ECG and PPG signals. HRV signals are further analyzed based on time and frequency domain to determine the driver's drowsiness status.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.3
• /
• pp.11-18
• /
• 2010

In this study, the pulse of radial artery and oxygen saturation are detected using photoelectric plethysmograph method. Using our device designed reflection type, we can detect the reflected light by radial artery and by switching circuit, we can also separate to 625nm band signal and 940nm band signals. The separated signals are converted as a pulse data by the pulse signal processing circuit. In this study, the reflection type of oxygen saturation calculation method is applied instead of the transmission type because of the reflection type sensor is used to measure the radial artery. As a result, we can detect about 97% accuracy of the oxygen saturation compare with the conventional method. For the accurate signals, the wrist band with sensor was designed and fixed on the radial artery. As a result, this wrist band type sensor was applicable to prevent position errors from motion artifact and could increase the accuracy during the measuring.

• Journal of the Korean Vacuum Society
• /
• v.18 no.6
• /
• pp.488-493
• /
• 2009

We developed a simple method to control the length of carbon nanotube array by using oxygen plasma etching. In this way, we could obtain a carbon nanotube with a uniform length (20, 30, 50, $70\;{\mu}m$), that was parallel to the substrate. Moreover, our growing method of carbon nanotube array gives a uniform diameter ~3.5nm, which is consistent with our previous results. Using the same etching method, we demonstrated the carbon nanotube radio frequency identification (RFID) antenna. The results could be useful for carbon nanotube applications such as flexible and transparent conductive films.