• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.405-413
• /
• 2006

In general mechanical servo systems, friction deteriorates the performance of controllers by its nonlinear characteristics. Especially, friction phenomenon causes steady-state tracking errors and limit cycles in position and velocity control systems, even though gains of controllers are tuned well in linear system model. Even if sensor is used higher accuracy level, it is difficult to improve tracking performance of the position to the same level with a general control method such as PID type. Therefore, many friction models were proposed and compensation methods have been researched actively. In this paper, we consider that the variation of mover's mass is various by loading and unloading. The normal force variation occurs by it an other parameters. Therefore, the proposed control system is composed of main position controller and a friction compensator. A parameter estimator for a nonlinear friction model is designed by adaptive control law and adaptive backstepping control method.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2558-2560
• /
• 2005

본 논문에서는 마찰력과 질량은 수직항력에 의해 관계하고, 시스템 입출력 관계에서도 도출할 수 있음에 착안하여, LuGre 모델을 기반으로 하는 수직항력 관측이 가능한 보상기 적용과 동시에 제어 입력과 시스템 출력 관계를 적응규칙을 통해 질량추정기를 설계하여 제어 입력의 스케일로 사용함으로써 그 성능을 더욱 향상시키고자 하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.976-977
• /
• 2006

선형전동기와 같은 선형운동을 하는 기기에서 원형운동을 하는 경우 속도가 0 이되는 부분에서 비선형적인 마찰력이 작용하며 이로 인한 운동괘적의 외곡 현상이 발생한다. 본 연구에서는 이러한 마찰력을 비롯한 모든 외란을 하나의 비선형적인 외란으로 간주하여 실용적으로 사용할 수 있는 간단한 형태의 외란 관측기를 제시한다. 또한 모든 외란 관측기에서 피할수 없는 문제의 하나인 전동기 관성(모멘트)의 변동 문제를 해결하기 위하여 제한적이지만 매우 효과적으로 관성을 추정해낼 수 있는 새로운 방법을 제안한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.11
• /
• pp.967-974
• /
• 2017

Reaction wheel shows nonlinear torque response on low-speed region due to friction. Thus precise satellite attitude control on this region is hard to achieve. Previous research tries to solve this problem, by compensating friction or applying dither command. However, due to difficulties of drag torque modeling or frequent zero wheel speed crossing, these methods are not suitable to apply on the real satellite attitude control. To solve this problem, we propose the attitude controller gain adjustment method based on the attitude error.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.2
• /
• pp.117-123
• /
• 2013

Since the nonlinear factors such as friction in a mechanical servo system can't be easily measured nor estimated accurately. Therefore, it is difficult to compensate friction correctly. Friction makes a significant error in a 2-axis stabilized gimbal system and finally fails to reach the ultimate control performance goals. To solve these problems, lots of studies on the control methods applying observer have been performed. However, these methods can be used in specific conditions and are limited to apply them to the accurate 2-axis stabilized gimbal system in military sector. This paper deals with the PI-LEAD algorithm which is modified with a general and robust PID algorithm, proves the effect of the algorithm through modeling and simulation, and verifies the performance by applying the algorithm to the real 2-axis stabilized system. It is verified through the performance test that the PI-LEAD algorithm minimizes the error caused by friction and meets requirements of the accurate servo system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1925-1930
• /
• 2010

For high-speed/high-accuracy position control of a gantry-moving-type linear motor, we propose a nonlinear adaptive controller including a synchronization algorithm. Linear motors are easily affected by force ripple, friction, and parameter variations because there is no mechanical transmission to reduce the effects of model uncertainties and external disturbances. Synchronization error is also caused by skew motion, model uncertainties, and force disturbance on each axis. Nonlinear effects such as friction and ripple force are estimated and compensated for. The synchronization algorithm is used to reduce the synchronous error of the two side pillars. The performance of the controller is evaluated via computer simulations.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.3
• /
• pp.369-374
• /
• 2010

Linear motors are easily affected by load disturbances, force ripples, friction, and parameter variations because there are no mechanical transmissions that can reduce the effects of model uncertainties and external disturbance. In this study, a nonlinear adaptive controller to achieve high-speed/high-accuracy position control of a two-axis linear motor is designed. The operation of this controller is based on a cross-coupling algorithm. Nonlinear effects such as friction and force ripples are estimated and compensated for. An enhanced cross-coupling algorithm is proposed for effectively improving the biaxial contour accuracy while achieving closed-loop stability. The proposed controller is evaluated by performing computer simulations.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.224-226
• /
• 2008

본 논문에서는 매트릭스 컨버터로 구동되는 유도전동기의 속도제어 성능을 향상시키기 위한 적응제어 기법을 제안한다. 유도 전동기는 비선형적 마찰력 등으로 인한 비선형적 특성을 가진다. 이러한 비선형적 특성으로 인해 야기되는 왜곡을 보상하고 속도제어 성능을 개선하기 위해 슬라이딩 모드 제어 기법을 적용한다. 슬라이딩 모드에서 발생하는 채터링 현상과 모델링되지 않은 유도 전동기의 불확실성에 의한 제어 성능 저하를 개선하기 위해, 불확실성 추정을 위한 퍼지 기반 불확실성 추정기를 적용한다. 시뮬레이션을 통해 제안한 제어기법의 타당성을 검증한다.

• Proceedings of the KIEE Conference
• /
• 2003.07e
• /
• pp.103-105
• /
• 2003

본 논문에서는 이동로봇의 마찰력 보상을 위해 퍼지 외란 관측자를 설계한다. 이동로봇은 주행 바닥면에 따라 주행 특성이 달라질 수 있다. 주행 중 발생하는 마찰력은 비선형적인 특성을 가지므로 이에 검출할 수 있는 퍼지 관측기를 설계하도록 한다. 설계된 퍼지 관측기를 적용함으로써 주행 바닥 면의 상태에 따라 발생하는 마찰력의 영향을 최소화시킴으로써 주행 특성을 효과적으로 개선시킬 수 있다.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.108-117
• /
• 1997

To prove the stability and the effectiveness of the robust non-linear friction control suggested and proved analytically in the previous paper, the describing function analysis is introduced. The instability of the Southward's nonlinear friction compensation for a digital position control and the improvement of phase margin of the robust nonlinear friction compensation are verified qualitatively through the describing function analysis. Those controls are applied to a single-axis digital servo driving experimental setup which has inherent stick-slip friction and experimental results confirm the results obtained in and the effectiveness of the robust nonlinear friction compensation for a digital position control.