• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.4
• /
• pp.385-391
• /
• 2014

This paper proposes fuzzy disturbance observer based multiple sliding surface control scheme for nonlinear systems with mismatched disturbance. In order to stabilize nonlinear systems with mismatched disturbance, a controller based on multiple sliding surface control scheme is designed. In addition, a fuzzy disturbance observer is used to estimate the disturbance. Using the fuzzy disturbance observer, "explosion of terms" problem and chattering problem were solved. The stability of the proposed control scheme is analyzed by Lyapunov stability theory. For the verification, we apply the proposed method to numerical examples and compare its result with that of the applied nonlinear disturbance observer based sliding mode control.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.156-165
• /
• 2003

This paper describes the design of a robust adaptive fuzzy observer for uncertain nonlinear dynamical system. We propose a new method in which no strictly positive real (SPR) condition is needed. No a priori knowledge of an upper bound on the lumped uncertainty is required. The Lyapunov synthesis approach is used to guarantee a semi-global uniform ultimate boundedness property of the state observation error, as well as of all other signals in the closed-loop system. The theoretical results are illustrated through a simulation example of a mass-spring-damper system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1551-1552
• /
• 2008

본 논문은 네트워크 기반 제어시스템(NCS: Networked Control Systems)에 모델매칭 제어기법을 적용한 효율적인 제어알고리즘을 제안한다. 비선형의 특징을 가지는 제어기 및 관측기의 시간지연을 Taylor 근사법으로 선형화하여 선형시스템 이론을 적용한 모델매칭 제어기를 설계하였다. 또한, 제어기의 차수를 우세극 기법과 극,영점 상쇄기법(Pole-Zero Cancelation)을 통해 저차화한 후 그 타당성을 검증하였다. 제안한 제어알고리즘의 컴퓨터 시뮬레이션을 실시하였으며 기존의 고차 모델매칭 제어기와 비교분석하여 타당성 및 신뢰성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2185-2187
• /
• 2004

시간지연 상태추정 기법을 이용한 시간지연 관측기가 최근 제안되었다. 시간지연 관측기는 설계시 모델이 필요하지 않아 파라미터 변동 및 외란 등에 둔감하며 계산이 간단하여 실제 시스템으로의 적응이 용이하다. 본 논문에서는 시간지연 제어이론이 위치제어기로 적용된 유도무기용 BLOC 모터 구동시스템에서 속도센서를 사용하지 않는 시간지연 관측기의 설계내용을 기술하였다. 시간지연 관측기를 위한 최적의 고유치를 갖는 오차동력학 특성방정식을 선정하고 BLDC 모터 구동시스템에 대해 비선형 시뮬레이션을 수행하였으며 파라미터 변동에 대해 비교하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.67-73
• /
• 2002

This paper presents a sliding mode observer and Controller far the state estimation and the dynamic stabilization of the magnetic levitation systems. The proposed striding mode observer is constructed by means of Lyapunov stability theorem to decrease the observer error, and the sliding rode controller is designed by a linear combination of the equivalent and nonlinear control input for the estimated states. The feasibilities of the suggested design method are illustrated with the simulation results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.138-143
• /
• 1999

A new control method for the precision robust position control of a brushless DC(BLDC) motor for direct drive m motor(BLDDM) system using the asymptotically stable adaptive load torque observer is presented. A precision position c control is obtained for the BLDD motor system appro성mately linearized using the fieldlongrightarroworientation method. Many of t these motor systems have BLDD motor to obtain no backlashes. On the other hand, it has disadvantages such as the h high cost and more complex controller caused by the nonlinear characteristics. And the load torque disturbance is d directly affected to a motor shaft. To r밍ect this problem, stability analysis is calTied out using Lyapunov stability t theorem. Using this results, the stability is proved and load disturbance detected by the asymptotically stable adaptive observer is compensated by feedforwarding the equivalent CUlTent having the fast response.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.2
• /
• pp.8-15
• /
• 2010

This paper proposes a robust high-gain observer design scheme for nonlinear systems and its stability is analyzed based on Lyapunov theory. It is assumed that their states are unmeasurable. The proposed high-gain observer has the integrator of the estimation error in dynamics. It improves the performance of high-gain observers and makes the proposed observer robust to noisy measurements, uncertainties and peaking phenomenon as well. Its stability is analyzed by the Lyapunov approach. In order to verify the effectiveness of the proposed scheme, it is applied to output feedback controllers and some comparative simulation result with the existed observer based output feedback controllers and state feedback controllers is given.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.307-308
• /
• 2007

In general, most physical systems are complex, highly non-linearity, affected by disturbance, incomplete knowledge, and even interactive change with the operating points. To solve this problem, the research of modem control theory and controller is proceeding. Before appling the proposed controller to the real system, however, it needs an apparatus which can verify the proposed controller for being not damaged the plant. In this paper, therefore, a RCGA-based PI-type state feedback controller using reduced-order observer is implemented and applied to the seesaw system and a series of simulation are carried out to verify the effectiveness of the control system.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.39-40
• /
• 2008

본 논문은 네트워크 기반 제어시스템(NCS: Networked Control Systems)모델매칭 제어기법을 적용한 효율적인 제어알고리즘을 제안한다. 비선형의 특징을 가지는 제어기 및 관측기의 시간지연을 Pade 근사법으로 선형화하여 선형시스템 이론을 적용한 모델매칭 제어기를 설계하였다. 또한, 제어기의 차수를 줄이기 위하여 저차시스템으로 근사화하여 그 타당성을 검증하였다. 제안한 제어알고리즘의 타당성 및 신뢰성을 검증하기 위하여 컴퓨터 시뮬레이션을 실시하였으며 기존의 PID 제어기법과 비교분석하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2353-2363
• /
• 1994

This paper is concerned with the design of a robust digital controller using reduced-order observer on a robotic manipulator under the disturbance. In most cases of robotic manipulator since all state vectors are not measurable, the unmeasurable state vectors must be estimated or reconstructed. Other problems are caused by the nonlinear element like as nondifferentiable Coulomb friction, disturbance due to the gravitational pull, and the torsional spring effect of a link between the drive motor and the manipulator arm. The controller is based on feeding back the observable variables and the estimated state variables which are generated by the observer, and augmenting the system by additional discrete integrators. The feedback gain parameters are obtained by first applying the optimal control theory and then readjusting the feedback parameters to eliminate the limit cycle by using describing Function for nonlinear hybrid system.