• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.12
• /
• pp.755-760
• /
• 1999

Various fluoride films were investigated for a gate insulator of thin film transistor application. Conventional oxide containing materials like $SiO_2\;Ta_2O_5\; and \; Al_2O_3$ exhibited high interface states which lead to an increased threshold voltage and poor stability of TFT. In this paper, we investigated gate insulators using a binary matrix system of fluoride such as $CaF_2,\; SrF_2\; MgF_2,\; and\; BaF_2$. These materials exhibited an improvement in lattice mismatch, interface state and electrical stability. MIM and MIS devices were employed for an electrical characterization and structural property examination. Among the various fluoride materials, $CaF_2$ film showed an excellent lattice mismatch of 5%, breakdown electric field higher than 1.2MV/cm and leakage current density of $10^{-7}A/cm^2$. MIS diode having $Ca_2$ film as an insulation layer exhibited the interface states as low as $1.58\times10^{11}cm^{-2}eV^{-1}$. This paper probes a possibility of new gate insulator materials for TFT applications.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.286-286
• /
• 2020

인공함양은 대수층함양관리 중 하나의 기법이며 하수처리장 방류수의 영향을 직·간접적으로 받은 물을 지하대수층에 함양하여 수질의 향상을 기대할 수 있다. 그러나 방류수의 영향으로 인해 다수의 미량유해물질들이 대수층으로 유입됨에 따라 함양 후 회수할 때 이들의 검출이 빈번해졌다. 이에 따라 이 미량유해물질의 제거를 위해 인공함양의 후속 공정으로 나노막 여과를 고려하여 인공함양과 나노막 공정을 통하여 미량유해물질의 거동을 파악하고자 하였다. 본 연구에서는 인공함양 지하저수지 모사 컬럼을 설계하여 실험하였다. 서울특별시 탄천 하류에서 샘플링한 물을 원수로 사용하였으며 인공함양에 앞서 염소, 과망간산염, 오존의 3종류 산화 전처리를 통하여 그 영향을 확인하고자 하였다. 함양기간은 2.5일이었으며 함양 후 나노막 장치를 통하여 최종 유출수를 획득하였다. 인공함양 결과 용존유기물은 45%~63% 수준에서 제거가 되어 인공함양시 용존유기물의 제거가 가능함을 확인하였다. 산화 전처리에 따른 동화가능유기탄소의 증가로 인하여 생분해가 주요 기작인 인공함양 처리를 통하여 동화가능유기탄소의 제거율이 유기용존탄소의 제거율에 직접적으로 영향을 주었음을 알 수 있었다. 미량유해물질로 알려진 과불화화합물의 경우 산화 전처리에 따른 제거는 관찰되지 않았으며 잔류의약물질의 경우 대상 물질의 물리·화학적 특성에 따라 산화시 제거가 가능함을 확인하였다. Iopromide와 같은 조영제의 경우 오존 산화를 통하여 98% 이상 제거되어 산화를 통한 제거가 가능함을 확인하였다. 인공함양시 과불화화합물은 분자량이 큰 PFNA, PFDA, PFOS 등이 제거되었으며 그 제거율은 각각 최대 >99%까지 도달하였다. 분자량이 작은 과불화화합물의 경우 인공함양을 통과하는 경향을 보였다. 잔류의약물질의 경우 생분해가 용이한 물질은 제거가 됨을 확인하였으며 carbamazepine 등 제거가 안 되는 물질은 제거율이 18% 미만으로 확인하였다. 나노막 여과 결과 과불화화합물이 최대 >99%까지 제거됨을 확인하였으며 미량유해물질의 경우에도 대부분의 물질이 제거됨을 확인하였다.

• Membrane Journal
• /
• v.30 no.5
• /
• pp.326-332
• /
• 2020

In this study, polymer-fluorinated silica composite hollow fiber membranes were fabricated and applied to a membrane contactor for the recovery of methane dissolved in the anaerobic effluent. To prepare the composite membranes, porous hollow fiber substrates were fabricated with Ultem^®, a commercial polyetherimide (PEI). Subsequently, fluorinated silica particles were synthesized and coated on the surface via strong covalent bonding. Due to the high porosity, our membrane showed a CH₄ flux of 8.25 × 10^-5 ㎤ (STP)/㎠·s at the liquid velocity of 0.03 m/s which is much higher that that of commercial polypropylene membrane designed for degassing processes. This is attributed to our membrane's high porosity as well as a superior surface hydrophobicity (120~122°) resulted from the coating with fluorinated silica nanoparticles.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.189-203
• /
• 2013

F-gases, gases containing fluorine such as perfluorocarbons (PFCs), sulfurhexafluoride ($SF_6$), nitrogen trifluoride ($NF_3$) are known to have green house effects. Although the net emission rates of gases containing fluorine are much lower than those of $CO_2$, their contribution to global warming cannot be ignored because of their extremely high global warming potential (GWP). F-gases mainly have been used for a variaty of applications in the semiconductor/LCD processes and in the electric power distribution industry of the national key industry. One of practical solutions of controlling the emission rates of F-gases is to reuse by separation and recovery of F-gases of low concentration from the gases mixtures with nitrogen or air. This work investigates some methods for F-gases recovery and separation around the membrane-based process.

• 방재와보험
• /
• s.36
• /
• pp.31-33
• /
• 1988

1960년대까지는 저팽창단백포가 유류화재의 진압에 주로 사용되었으니 불소화합물 계면활성제로부터 유출된 합성 AFFF를 개발하면서 해수로도 이의 사용이 가능하고 지역 및 유출화재 예방에서 AFFF 특유의 초기진압효과 및 대형화재를 방지한다는 장점 때문에 널리 사용되고 있으며, 석유화학산업의 저장탱크지역 및 공정지역에서 AFFF와 FPF가 주로 사용되며 부두시설(Oilrig, Marine Tanker, 해상 / 해변터미널)에는 AFFF의 사용이 지배적이다. 현재 사용되고 있는 foam으로는 단백포(Protein: PF), 불화단백포(Fluoroprotein: FPF), 막형성 불화단백포(Film Forming Fluoroprotein Foam: FFFP), 고팽창폼(High Expansion Foam), 수성막 형성폼(Aqueous Film Foaming Foam: AFFF), 알콜폼(Alcohol Resistant Foam: ATD) 등이 있으니 본고에서는 AFFF 중심으로 소개한다.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.2
• /
• pp.125-129
• /
• 2008

Rechargeable lithium-ion polymer batteries have been considered to be next-generation power sources for portable electronic devices and electric vehicles. In this work, we tried to improve the cycling performances of lithium-ion polymer cells by coating aluminum fluoride and acrylonitrile-methyl methacrylate copolymer to the polyethylene separator. It was found that the addition of aluminum fluoride to the surface-modified separator reduced the interfacial resistances and thus the cell exhibited a less capacity fading and better high rate performance. The cell showed an initial discharge capacity of 150 mAh/g and good capacity retention at 0.5 C rate.

• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.2
• /
• pp.119-126
• /
• 2012

Purpose: To study changes in coating and lens materials after chemically etched different polymer based glass lenses in short-term and ambient condition using hydrofluoric acid. Methods: Vinyl ester polymer (Lens A) and thiourethane polymer (Lens B), both dyed in gray 70%, were etched in hydrofluoric acid solution for 5, 10, or 15 min. The mechanical properties, degrees of damages in hard coating, anti-reflection coating, and other coatings, rates of refractive index and light transmission of both polymer types were evaluated. Results: Rates of refractive index of both lens types were not changed significantly after chemical etching. However, anti-reflection coatings and hard coatings were removed and lens surfaces were damaged. As a results, UV light transmission of lenses increased and mechanical properties decreased. Chemical etching notably changed various properties of thiourethane polymer materials. Conclusions: Depending on types of polymer materials, chemical reactions by hydrofluoric acid were dissimilar. Thus, various properties of les materials were altered differently.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.374-380
• /
• 2011

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases and $SF_6$ as an additive gas under thermal chemical vapor deposition system. The characteristics (formation density and morphology) of as-grown carbon coils according to the injection stage of $SF_6$ gas incorporation were investigated. A continuous injecting of $SF_6$ gas flow could give rise to many types of carbon coils-related geometries, namely linear tub, micro-sized coil, nano-sized coil, and wave-like nano-sized coil. However, the limitation of the geometry as the nano-sized geometries of carbon coils could be achieved by the incorporation of $SF_6$ in a short time (1 min) during the initial deposition stage. A delayed injection of a short time $SF_6$ gas flow can deteriorate the limitation of the geometries. It confirms that the injection time and its starting point of $SF_6$ gas flow would be very important to determine the geometries of carbon coils.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 1999.11a
• /
• pp.139-142
• /
• 1999

• Journal of the Korean Vacuum Society
• /
• v.20 no.4
• /
• pp.276-279
• /
• 2011

Polymer electrostrictor materials can exhibit high electroactive strain and hold increasing promise for a variety of actuator applications. The size of available actuators has been limited, however, by the solution-based casting and annealing process generally required to prepare electrostrictor actuator materials. We report on a high throughput melt and stretch extrusion process capable of creating large sheets of an electrostructive terpolymer, poly (vinylidene fluoride-trifluoroethylene-1, 1-chlorofluoroethlene) while producing a suitable crystallinity and crystal phase for high strain electrostrictor performance such as artificial muscle systems.