• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1151-1160
• /
• 2009

Perfluorinated compounds (PFCs) have been recognized as emerging environmental pollutants and are widely distributed all over the world. These compounds are hardly degradable and cause bioaccumulation and biomagnification during present for a long time in the environment: thereby after adversely biota and human bodies. It is difficult to remove PFCs using conventional water/wastewater treatment because of resistant property to photodecomposition, biodegradation and chemical decomposition. Moreover, domestic literature data on the pollution of PFCs in rivers and lakes are limited. In this paper, species, sources and risk of PFCs as well as behavior properties in drinking water/wastewater and treatment processes are demonstrated to encourage the domestic concern about PFCs.

• Journal of dental hygiene science
• /
• v.14 no.4
• /
• pp.580-588
• /
• 2014

Fluoride use is the best and widespread method for dental caries prevention. The aim of this study was to investigate experience and recognition of fluoride for caries prevention focusing on majors in one university. Four hundred twenty-four university students were selected by convenience sampling with informed consent and answered the questionnaire by self recording type. The subjects except dental hygiene students knew about purpose of fluoride use (84.6%), over the count fluoride rinse (63.2%), fluoride toothpaste (61.5%), professional fluoride application (56.4%) and water fluoridation (43.6%). They experienced over the count fluoride rinse (67.5%), school fluoride rinse (45.3%), professional fluoride application (30.8%), fluoride toothpaste (28.2%) and water fluoridation (12.0%). The main information paths about fluoride were university lectures among dental hygiene students and internet and mass media, followed by nurse-teachers among non dental hygiene students. The ratios of intention to use fluoride were: 67.8% in dental hygiene, 34.9% in health, 51.4% in non-health in case of professional fluoride application for oneself, 93.1% in dental hygiene, 48.0% in health, 50.4% in non-health in case of professional fluoride application for their children, 79.0% in dental hygiene, 51.3% in health, 55.8% in non-health in case of water fluoridation. The subjects to experience and recognize fluoride for caries prevention had more positive intention to use fluoride. The answers of students majoring in health or medical care were not different from non-health, except dental hygiene. Dental professionals should try to let the public know about fluoride use for caries prevention through mass media and internet as well as individual education in dental clinics.

• Journal of dental hygiene science
• /
• v.5 no.2
• /
• pp.71-76
• /
• 2005

This study tried to understand influence of water fluoridation program on oral health status and get the basic data of water fluoridation program in the future. Sangdang-gu in Cheongju City, fluoridated community and Manan-gu in Anyang City, non-fluoridated community were the surveyed area of the study. And from July 3, 2003 to July 22, 2003, using questionnaire, we surveyed opinions of parents of the fifth and sixth grade students of C elementary school in Sangdang-gu, Cheongju City and A elementary school in Manan-gu, Anyang City about water fluoridation program, and made an oral examination on the fifth and sixth grade students. The results are as follows : 1. DMFT index was lower for Cheongju, fluoridated community with Cheongju 1.69, Anyang 2.11(P = .010). 2. DMFT rate was lower for Cheongju, fluoridated community with Cheongju 6.72%, Anyang 7.94%. 3. Health level of the first molar was higher for Cheongju, fluoridated community with Cheongju 95.54%, Anyang 94.10%(P = .002). This study intends to understand the effects of fluoridation program on oral status by analyzing the effects of water fluoridation program and present basic materials for improving oral health. Improving national oral health is thought to be associated with expense retrenchment of oral health insurance financial. So it may need to extend using tap water to all the area of the country and additionally establish confidence through an active public relations and education of water fluoridation program.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.254-259
• /
• 2021

Optical and electrical characteristics of the fluorocarbon films deposited in a high-density C4F8 plasma under various source powers and pressures were investigated. The F/C ratio of the fluorocarbon film deposited in a high-density C4F8 plasma increased with increasing source power and decreasing pressure due to two-step deposition mechanism. The change in the F/C ratio of the film directly affected the optical and electrical characteristics of the fluorocarbon films deposited in a high-density C4F8 plasma. The refractive index of the fluorocarbon film increased with decreasing source power and increasing pressure contrary to the dependence of the film's F/C ratio on the source power and pressure. This was because the increase in the F/C ratio suppressed electronic polarization and weakened the network structures of the film. The resistivity of the fluorocarbon film showed the same behavior as its F/C ratio. In other words, the resistivity increased with increasing source power and decreasing pressure, resulting from stronger repellence of electrons at higher F/C ratios. This work offers the feasibility of the use of the fluorocarbon films deposited in a high-density C4F8 plasma as an alternative to low dielectric constant materials because the optical and electrical properties of the fluorocarbon film can be directly controlled by its F/C ratio.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.374-380
• /
• 2011

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases and $SF_6$ as an additive gas under thermal chemical vapor deposition system. The characteristics (formation density and morphology) of as-grown carbon coils according to the injection stage of $SF_6$ gas incorporation were investigated. A continuous injecting of $SF_6$ gas flow could give rise to many types of carbon coils-related geometries, namely linear tub, micro-sized coil, nano-sized coil, and wave-like nano-sized coil. However, the limitation of the geometry as the nano-sized geometries of carbon coils could be achieved by the incorporation of $SF_6$ in a short time (1 min) during the initial deposition stage. A delayed injection of a short time $SF_6$ gas flow can deteriorate the limitation of the geometries. It confirms that the injection time and its starting point of $SF_6$ gas flow would be very important to determine the geometries of carbon coils.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.4
• /
• pp.257-262
• /
• 2013

The fluorine-containing waste water tends to show a higher removal efficiency through the coagulative precipitation process with calcium. However the tetrafluoroborate produced from the etching process is difficult to remaval due to it's low reactivity with calcium. The objective of this study is improving the efficiency of fluoride ion removal in tetrafluoroborate through decomposing. Research on tetrafluoroborate decomposition depending on reaction pH, temperature, and aluminum dosage were conducted, using a laboratory-scale reactor. The result shows that the reaction of tetrafluoroborate with aluminum is faster with lower pH, higher water temperature, and higher Al/T-F (Aluminum/Total Fluoride) mole ratio. It is found that there was no big change in concentration after over 120 minutes of reaction. This study is to be able to improve the efficiency of tetrafluoroborate and fluoride wastewater treatment by using aluminum.

• The korean journal of orthodontics
• /
• v.25 no.3 s.50
• /
• pp.235-245
• /
• 1995

The purpose of this paper is to review two recently reported, long-term studies of several chemical methods to control gingivitis and decalcification in adolescent orthodontic patients. The first study(gingivitis study) was designed to determine whether conventional toothbrushing and twice daily use of a brush-on 0.4 per cent $SnF_2$ gel containing more than 90 per cent available $Sn^{2+}$ would be more effective for controlling plaque accumulation and gingivitis in the presence of orthodontic appliances than conventional toothbrushing alone. The second study(decalcification study) was designed to compare the effectiveness of controlling decalcification in orthodontic patients with either a II00 ppm F tooth paste used alone, this same toothpaste and a 0.05 percent NaF rinse or this toothpaste and a 0.4 percent $SnF_2$ gel. In the gingivitis study, sixty-five consecutively treated adolescents who were to receive full-mouth fixed orthodontic appliances were assigned to two groups according to age and sex criteria. In the decalcification study an additional 30 subjects(95 total) were similarly assigned to a third group. The first group(control, n=35) used only toothbrushing with a standard fluoride(1100 ppm F) toothpaste. The second group used toothbrushing with a similar dentifrice supplemented with a 0.4 percent $SnF_2$ gel($SnF_2$ gel group, n=30) used twice daily for the entire 18-month study period. The third group(in the decalcification study only) used a similar toothpaste and 0.05 percent NaF rinse(NgF rinse group, n=30). Clinical assessments of plaque accumulation using the Plaque Index, gingival inflammation using the Gingival Index, and coronal staining were completed single-blinded before appliances were placed and 1, 3, 6, 9, 12 and 18 months after appliances were placed. Decalcification was assessed single blind on all labial surfaces of all erupted teeth before appliances were placed and 3 months after appliances were removed. The results of the gingivitis study indicated that the $SnF_2$ gel gorup had significantly lower scores for the Plaque Index(p<0.01) and Gingival Index(p<0.001) at all examinations during orthodontic treatment than did the control group. In the $SnF_2$ gel group, one subject developed mild coronal staining and two subjects developed moderate staining. In the decalcification study, when pre-treatment levels of decalcification were subtracted from post-treatment values, significantly lower decalcification scores(p<0.05) were found for both whole mouth and first molars in the NaF rinse and gel groups as compared with the control gorup(toothpaste alone). Although the gel group consistently had less decalcification than the rinse group, this difference only approached statistical significance.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.178-184
• /
• 2012

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases and $SF_6$ as an additive gas under thermal chemical vapor deposition system. The characteristics (formation density and morphology) of as-grown carbon coils were investigated as functions of additive gas flow rate and the cycling on/off modulation of $C_2H_2/SF_6$ flows. Even in the lowest $SF_6$ flow rate (5 sccm) in this work, the cycling on/off modulation injection of $SF_6$ flow for 2 minutes could give rise to the formation of nanosized carbon coils, whereas the continuous injection of $SF_6$ flow for 5 minutes could not give rise to the carbon coils formation. With increasing $SF_6$ flow rates from 5 to 30 sccm, the cycling on/off modulation injection of $SF_6$ flow confines the geometry for the carbon coils to the nanosized ones. Fluorine's role of $SF_6$ during the reaction was regarded as the main cause for the confinement of carbon coils geometries to the nano-sized ones.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.189-203
• /
• 2013

F-gases, gases containing fluorine such as perfluorocarbons (PFCs), sulfurhexafluoride ($SF_6$), nitrogen trifluoride ($NF_3$) are known to have green house effects. Although the net emission rates of gases containing fluorine are much lower than those of $CO_2$, their contribution to global warming cannot be ignored because of their extremely high global warming potential (GWP). F-gases mainly have been used for a variaty of applications in the semiconductor/LCD processes and in the electric power distribution industry of the national key industry. One of practical solutions of controlling the emission rates of F-gases is to reuse by separation and recovery of F-gases of low concentration from the gases mixtures with nitrogen or air. This work investigates some methods for F-gases recovery and separation around the membrane-based process.

• Applied Chemistry for Engineering
• /
• v.10 no.2
• /
• pp.242-246
• /
• 1999

For the fluorination of $CF_2Cl_2$, the yield of $CF_4$ was found to be increased with the contact time and the reaction temperature. When the mole ratio of HF/$CF_2Cl_2$ is 3 or above, the yield of $CF_4$ was attained to 100% at $370^{\circ}C$ and contact time of 3 seconds. In the case of the fluorination of $CCl_4$ with HF, the yield of $CF_4$ was obtained above 90% at the reaction temperature of $500^{\circ}C$, the contact time of 3 seconds, and the mole ratio of HF/$CCl_4$ of 5.