• Title/Summary/Keyword: 변조기

Search Result 1,318, Processing Time 0.025 seconds

Narrowband Modulation Response Enhancement Using a Dual-Electrode Distributed Feedback Laser Integrated With an Electro-Absorption Modulator (전계 흡수 변조기가 집적된 다중 전극 분포 궤환형 레이저를 이용한 광신호의 협대역 변조 응답 향상)

  • Cho, Jun-Hyung;Heo, Seo-Weon;Sung, Hyuk-Kee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.8
    • /
    • pp.1968-1973
    • /
    • 2013
  • We present the enhancement of narrowband modulation response of an optical source by integrating a dual-electrode distributed feedback (DFB) laser with an electro-absorption modulator (EAM). The dual-electrode DFB laser exhibits a multiple optical modes owing to a self-pulsation in GHz range. By modulating the laser and modulator sections of the integrated device simultaneously, 20-dB of narrowband modulation response enhancement at 6 GHz with 7-GHz tuning range has been observed.

Design of a CMOS Single Bit 3rd Order Delta-Sigma Modulator with Switched Operational Amplifier (스위치드 연산증폭기를 이용한 CMOS 단일비트 3차 델타시그마 변조기 설계)

  • Lee, Han-Ul;Dai, Shi;Yoo, Tai-Kyung;Lee, Keon;Yoon, Kwang-Sub;Lee, Sang-Min
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.37 no.8A
    • /
    • pp.712-719
    • /
    • 2012
  • This paper presents Single-bit Third order Delta-Sigma Modulator, which can be applied to the Low speed High resolution ADC in Audio signal Process System. Whereas the Operational Amplifier in modulator consumed static power dissipation in operating, this modulator used Switching on/off techniques, which makes the Power dissipation of the modulator reduced. Also proposed modulator minimizes frequency characteristic variation by optimizing switch position. And this modulator chooses Single-bit type to guarantee stability. The designed ADC went through 0.35um CMOS n-well 1-poly 4-metal process to be a final product, and the final product has shown 17.1mW of power dissipation with 3.3V of Supply Voltage, 6.4MHz of conversion rate. And 84.3dB SNDR and 13.5bit ENOB with 20KHz of input frequency.

High-speed optical interferometry using optical phase modulator (광위상 변조기를 이용한 고속 광 간섭계)

  • Hwang, Dae-Seok;Lee, Young-Woo
    • Proceedings of the KIEE Conference
    • /
    • 2005.11a
    • /
    • pp.24-26
    • /
    • 2005
  • 광 간섭계는 광을 이용한 다양한 계측분야에 사용된다. 일반적인 광 간섭계의 지연단은 기계적인 광지연에 의해 저속이며, 시스템 구성상 안정성이 떨어지게 된다. 본 논문에서는 기존의 광간섭계 지연단의 기계적 방식을 배제한 광위상 변조기를 이용한 지연단을 설계하고 그 특성을 분석하였다. 제안된 광 간섭계는 1310nm 10GHz의 반복율을 갖는 광원과 광위상변조기를 이용한 전(全) 광섬유 형태로 안정한 구성을 하였다. 구성된 광간섭계는 광위상 변조기의 변조 전압, 변조 주파수의 변화에 의해 광지연시간의 쉬운 변조가 가능하였으며 최대 20ps 의 광지연시간을 얻을 수 있었다.

  • PDF

Implementation and Performance Test of DDFS Modulator using the Initial Clock Accumulating Method (클록초기치 누적방식을 사용한 DDFS 변조기 구현과 성능평가)

  • 최승덕;김경태
    • The Journal of the Acoustical Society of Korea
    • /
    • v.17 no.8
    • /
    • pp.103-109
    • /
    • 1998
  • 디지털신호의 변조에는 기본적으로 진폭 편이 변조(ASK: Amplitude-Shift Keying), 주파수 편이 변조(FSK: Frequency-Shift Keying), 위상 편이 변조(PSK: Phase-Shift Keying) 등의 세 가지 방법이 있다. 본 논문에서는 표본클록 합성계수 방식에 관한 이론을 고찰하고, 클록초기치 누적방식의 DDFS를 이용하여 위에서 언급한 변조방법을 실현할 수 있는 주파수 도약 대역 확산 통신에 적합한 변조기를 구현하였다. 또한, 합성된 출력주파수 의 정현파형에 대한 스펙트럼 분석과 PN(Pseudo Noise) 부호를 사용한 순시적인 주파수 도 약 상태, 위상제어의 가능성 등을 확인한 결과 실험으로부터 다음과 같은 결과를 얻었다. 첫 째, 합성된 출력주파수는 주파수 Index에 따라 기준주파수에 정확히 정수배가 되며, 둘째, 합성된 정현파형의 스펙트럼으로 기본파와 여러 고조파의 크기를 비교하여 본 결과 50[dB] 이상의 차이가 남으로서 고조파 성분들이 상당히 감소되었음을 확인하였고, 셋째, PN 코드 를 사용하여 순시적인 주파수 도약 상태를 확인하여 본 결과 스위칭 시간이 빠르기 때문에 주파수 도약 특성이 뛰어남을 알 수 있었으며 또한, 누산기의 set/reset 상태를 변화시킴에 따라 위상이 제어됨을 입증하였다.

  • PDF

Linearity of All Optical Dual EA Modulator for Narrow-band Microwave Optical Transmissions (협대역 마이크로파 광전송을 위한 전광 이중 전계흡수 광변조기의 선형특성)

  • Lee, Gyu-Woong;Han, Sang-Kook
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.36D no.6
    • /
    • pp.87-96
    • /
    • 1999
  • For analog optical transmission of narrow-band microwave signal, a novel all-optical linearization technique of electro-absorption (EA) optical modulator by using dual modulation scheme is proposed and theoretically investigated. By using the dual modulation scheme where the sub-modulator has a different length, DC bias and band-gap wavelength, the DC bias operation point where the third-order intermodulation products of ~30dB and the following increase of spurious free dynamic range (SFDR) of ~20dB wave achieved in sub-octave narrow band operation.

  • PDF

Loop-back System Using Mach-Zehnder Modulator (Mach-Zehnder 변조기를 이용한 Loop-back System)

  • Kim, Hui-Ju;Gang, Dong-Seong;Jeon, Geum-Su;Ban, Jae-Gyeong
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.38 no.7
    • /
    • pp.479-485
    • /
    • 2001
  • In this paper, we propose optical subcarrier mutiplexing(SCM) transceiver module for base station(BS) that has no optical source and can be used for full-duplex communication over single optical fiber. In this method we retransmit optical modulated signal to the central office(CO) using loop-back system with a ring type Mach-Zehnder modulator(MZM) in BS, where optical source is transmitted from the CO. We have modeled the ring type MZM and were conformed that the measured results were in good agreement with the modeling. In the ring type MZM, the optical symmetric position of the MZM is very important in RF signal transmission.

  • PDF

Electrooptic Modulator with InAs Quantum Dots (InAs/InGaAs 양자점을 이용한 전계광학변조기)

  • Ok, Seong-Hae;Moon, Yon-Tae;Choi, Young-Wan;Son, Chang-Wan;Lee, Seok;Woo, Deok-Ha;Byun, Young-Tae;Jhon, Young-Min;Kim, Sun-Ho;Yi, Jong-Chang;Oh, Jae-Eung
    • Korean Journal of Optics and Photonics
    • /
    • v.17 no.3
    • /
    • pp.278-284
    • /
    • 2006
  • We have fabricated and measured electrooptic modulator using coupled stack InAs/InGaAs quantum dots. The height of the quantum dot is 16 nm and quantum dots are stacked including an InGaAs capping layer. The peak wavelength of photoluminescence is 1260 nm at room temperature and 1158 nm at 12 K. The operation characteristics of the quantum dots show high modulation efficiency of electrooptic modulator at 1550 nm compared to that of existing III-V bulk and MQW type semiconductor. The measured switching voltage ($V\pi$) is 540 and 600 mV, for TE mode and TM mode, respectively. From the results, the modulation efficiency can be determined as 333.3 and $300^{\circ}/V{\cdot}mm$ for TE and TM modes. The results reported here may lead to the design and fabrication of a novel electrooptic modulator with low switching voltage and high efficiency.

Design of Phase Modulator for Quantum Cryptographic Key Distribution System (양자 암호화키 분배 시스템의 위상변조기 설계)

  • ;;V E. Strigalev
    • Proceedings of the Optical Society of Korea Conference
    • /
    • 2002.07a
    • /
    • pp.160-161
    • /
    • 2002
  • 양자 암호화 키 분배 시스템에서 광자를 code화시키는 방법은 크게 편광coding과 위상 coding으로 대별할 수 있다. 또한 프로토콜은 4개의 상태를 가진 BB82 프로토콜과 2개의 상태를 가진 B92 프로토콜을 사용한 시스템을 많이 연구하고 있다. 본 연구는 B92프로토콜을 적용한, 위상 coding 양자 암호화 키 분배 시스템의 구성에 필요한 위상 변조기에 대한 비교 검토 및 위상 변조기 설계에 관한 것이다. (중략)

  • PDF

Performance Analysis and Design of Adaptive Modulation OFDM Simulator using Equalizer (등화기를 적용한 적응변조 OFDM 시뮬레이터 설계 및 성능 분석)

  • 강희조
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.8 no.2
    • /
    • pp.276-280
    • /
    • 2004
  • 본 논문에서는 Matlab Tool을 이용하여 적응변조 OFDM 시스템 GUI 시뮬레이터를 설계하였다. 설계된 시뮬레이터를 이용하여 적응변조 기법을 위한 채널 추정 알고리즘과 무선 채널환경에서 시스템에 미치는 영향을 분석하고 추정된 결과를 이용하여 적응형 등화기를 적용한 적응변조 OFDM 시스템의 성능을 BER과 성좌도를 통하여 분석한다. 분석결과, 기존의 고정된 변조 방식을 사용하는 시스템인 경우 고속의 데이터 전송을 위해 높은 지수의 변조모드(64QAM)를 사용함으로써 채널 환경에 민감하게 심볼오류 발생률이 증가함을 알 수 있었다. 하지만 채널상태에 따라 가변을 취하는 적응변조 OFDM 시스템의 경우 64QAM방식에 비해 (BER=10-2)를 기준으로 약 8㏈ 성능의 이득이 있음을 알 수 있고 적응형 등화기를 적용함에 따라 왜곡을 받은 신호 파형의 보상이 가능함을 알 수 있다. 무수한 장애의 요인을 갖은 무선 채널환경에서 효율적인 데이터 전송을 위해 적응변조시스템이 요구되어짐을 알 수 있었다.

A Novel Third-Order Cascaded Sigma-Delta Modulator using Switched-Capacitor (스위치형 커패시터를 이용한 새로운 형태의 3차 직렬 접속형 시그마-델타 변조기)

  • Ryu, Jee-Youl;Noh, Seok-Ho
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.14 no.1
    • /
    • pp.197-204
    • /
    • 2010
  • This paper proposes a new body-effect compensated switch configuration for low voltage and low distortion switched-capacitor (SC) applications. The proposed circuit allows rail-to-rail switching operation for low voltage SC circuits and has better total harmonic distortion than the conventional bootstrapped circuit by 19 dB. A 2-1 cascaded sigma-delta modulator is provided for performing the high-resolution analog-to-digital conversion on audio codec in a communication transceiver. An experimental prototype for a single-stage folded-cascode operational amplifier (opamp) and a 2-1 cascaded sigma-delta modulator has been implemented m a 0.25 micron double-poly, triple-metal standard CMOS process with 2.7 V of supply voltage. The 1% settling time of the opamp is measured to be 560 ns with load capacitance of 16 pF. The experimental testing of the sigma-delta modulator with bit-stream inspection and analog spectrum analyzing plot is performed. The die size is $1.9{\times}1.5\;mm$.