• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.6C
• /
• pp.883-892
• /
• 2004

Recently, in order to improve high speed data transmission and spectral efficiency in wireless communication systems, the study on the combination OFDM and space-time coding is active. Also, a solution to improve system capacity in multiuser systems is to use adaptive antennas. In a system using STBC, the signals transmitted from two transmit antennas are superposed at the receive antenna and the interference between two transmit antennas of a user occures. Thus it is difficult to apply the conventional beamforming techniques for single antenna to the systems using space-time coding. In this Paper, we present the MMSE beanforming technique using training sequence for STBC-OFDM systems in reverse link and evaluate the performance by using various parameters in TU and HT channels.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.835-842
• /
• 1996

To identify the locations and strengths of acoustic sources, one may use a microphone line array. Apparent advantage of the source identification method utilizing a line array is that it requires less measurement points than intensity method and holography. This method is based on the information of magnitude and phase difference between pressure signals at each microphone. Since those differences are dependent on the source model, we have to assume them such as plane, monopole, etc. In this paper the conventional source identification methods such as beamforming method and MUSIC method are briefly reviewed by modeling a source as plane and spherical wave, then a modified method is introduced. This can be applied to sound field which may by either coherent or incoherent. Typical simulations and experiment are performed to confirm this identification method.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.11.2-11.2
• /
• 2009

Au-Ag 합금 박막에서 화학적으로 덜 안정한 Ag를 선택적으로 에칭하는 dealloying 기법을 통하여 crack-free 나노기공 gold 박막을 Si 기판에 제조하였다. Au-Ag 합금 박막은 두 가지 방법을 이용하였다: 1) thermal 또는 electron beam 증착법을 이용하여 Au 와 Ag 다층 박막을 Si 기판에 증착시킨 후 열처리를 통한 합금 박막제조; 2) co-thermal 증착법을 이용하여 Au-Ag 합금박막을 Si 기판에 직접 증착. Crack-free 나노기공 gold 박막 제조에 적합한 합금조성을 얻기 위하여 증착 속도, 열처리조건, dealloying 조건등을 조절하였다. Perchloric acid, HClO4 전해질을 이용한 전기화학적 dealloying을 통하여 crack-free 나노기공 gold 박막을 제조하였고, 기공크기를 조절할 수 있었다. 이에 더하여, electrophoretic 방법을 이용하여 나노기공 gold와 semiconductive 양자점 (CdTe 또는 CdSe)의 나노복합박막을 형성시킨 후 특성을 분석하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.431-434
• /
• 2003

As a wavelet transform which is presented as a new technique of signal processing field has time and frequency localization capabilities, it's possible for multiresolution analysis as well as easy to analyze various signal. So it is being applied in many fields recently. And when two wavelet base were designed to form Hilbert transform pair, wavelet pair show superior performance than the existing DWT(discrete wavelet transform) in data detection of pulse type. Therefore in this paper, we detected position of impulse noise by using two dyadic wavelet base which is designed by truncated coefficient vector.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.4 no.1
• /
• pp.142-163
• /
• 1993

A 8 year old boy with problems of hyperactivity, impulsivity received playpsychotherapy. Through the detailed examination of their contents and group supervision of play therapy session, common mistakes novice therapist make frequently and tasks in the initial phase of play psychotherapy are illustrated. Therapist's personality and anxiety frequently interferes therapeutic processes. Common mistakes therapist makes during initial phase of play therapy are ; therapist's over-enthusiasm, overinvolvement or non-responsiveness, premature or inappropriate interpretation and direct connection of play theme to reality. It is utmost important for the therapist to make positive and trusting relationship with the patient in the initial phase of the therapy. In order to do so therapist must accept the patient as he is, permit the patient takes his leads. And as a result, the Patient can go through corrected developmental experience. In conclusion, it is a therapist's main task to establish relationship.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.1
• /
• pp.270-279
• /
• 1997

The conversion of printed maps into computerized databases is an enormous task. Thus the automation of the conversion process is essential. Efficient computer representation of printed maps and line drawings depends on codes assigned to characters, symbols, and vector representation of the graphics. In many cases, maps are constructed in a number of layers, where each layer is printed in a distinct color, and it represents a subset of the map information. In order to properly represent the character layer from color map images, an interactive clustering and character extraction technique is proposed. Character is usually separated from graphics by extracting and classifying connected components in the image. But this procedure fails, when characters touch or overlap lines-something that occurs often in land register maps. By vectorizing line segments, the touched characters and numbers are extracted. The algorithm proposed in this paper is intended to contribute towards the solution of the color image clustering and touched character problem.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.11a
• /
• pp.874-877
• /
• 2007

최근 건설 산업이 고도화, 지능화됨에 따라 건설자재정보의 효율적인 관리방안으로 RFID 기술을 이용하려는 연구 및 적용 사례가 증가 하고 있다. RFID(Radio Frequency Identification)란 라디오 주파수를 이용한 무선인식 기법을 뜻하는 것으로 건설자재에 RFID Transponder(이하 태그)를 부착하여 생산, 유통, 설비 등 전 과정의 정보 추적 및 관리가 가능하다. 그러나 RFID 시스템 특성상 전자기장이 형성되는 철골자재나 수분이 포함된 콘크리트, 도료(안료) 등의 자재에서는 RFID 적용이 쉽지 않다. 또한, 현재 사용 중인 RFID 장비마저도 표준화 되어 있지 않고 사용 주파수 대역 또한 각각 다르기 때문에 건설자재에 적용하기위한 RFID 시스템의 표준화 및 규격화가 절실하다. 본 논문에서는 건설자재에 RFID를 적용하기 위한 표준화 방향을 제시하는 기초 연구로써 목재, 철재 빔, 도료(안료), 콘크리트, 배관자재(철/동/PE)에 Passive Type의 일반(Pager) 태그, 금속 태그, 액체형 태그를 부착 매립하여 125KHz, 13.56MHz, 900MHz의 주파수 대역과 자재 물성별 인식거리 및 인식률 시험을 진행하여 건설자재에 RFID를 적용하기위한 표준 주파수 대역 및 재질에 따른 적정 태그를 제시하고자 한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.155-163
• /
• 2012

The geometrical and electrical errors of array sensors can severely degrade the performance of array sensor system. Various calibration techniques are developed to alleviate this problem. In this paper, two different calibration methods with respect to location, gain and phase of array sensors are presented. One method applies the first-order Taylor series expansion to approximate the true steering vector from the nominal values of array sensors. Then a set of equations is formed by using the null characteristics of the MUSIC spectrum to estimate errors of location, gain and phase of array sensors. Another method estimates these errors based on the data covariance matrix of pilot sources. From the simulations, it is demonstrated that two calibration algorithms calibrated an array system successfully. In addition to that, Fistas and Manikas's algorithm is more robust against noise than Ng and Lie's one when SNR is from 10dB to 50dB.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1575-1581
• /
• 2003

As a society has progressed rapidly toward a highly advanced digital information age, a multimedia communication service for acquisition, transmission and storage of image data as well as voice has being commercialized externally and internally. However, in the process of digitalization or transmission of data, noise is generated by several causes, and researches for eliminating those noises have been continued until now. There were the existing FFT(fast fourier transform) and STFT(short time fourier transform) for removing noise but it's impossible to know information about time and time-frequency localization capabilities has conflictive relationship. Therefore, for overcoming these limits, wavelet transform which is presented as a new technique of signal processing field is being applied in many fields recently. Because it has time-frequency localization capabilities it's Possible for multiresolution analysis as well as easy to analyze various signal. And when two wavelet base were designed to form Hilbert transform pair, wavelet pair provide superior performance than the existing DWT(discrete wavelet transform) in data characteristic detection. Therefore in this parer, we removed impulse noise by using adaptive-length median filter and two dyadic wavelet base which is designed by truncated coefficient vector.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.751-758
• /
• 2015

Mathematical models are actively used to reduce the experimental expenses required to understand physical phenomena. However, they are different from real phenomena because of assumptions or uncertain parameters. In this study, we present a calibration and validation method using a paper helicopter and statistical methods to quantify the uncertainty. The data from the experiment using three nominally identical paper helicopters consist of different groups, and are used to calibrate the drag coefficient, which is an unknown input parameter in both analytical models. We predict the predicted fall time data using probability distributions. We validate the analysis models by comparing the predicted distribution and the experimental data distribution. Moreover, we quantify the uncertainty using the Markov Chain Monte Carlo method. In addition, we compare the manufacturing error and experimental error obtained from the fall-time data using Analysis of Variance. As a result, all of the paper helicopters are treated as one identical model.