• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.385-393
• /
• 2019

Potential fire, explosion and safety hazards exist in medium- or small-scale chemical plants using radical batch reaction processes due to the various conditions of materials, works or products. To minimize the potential damage, a study was conducted on qualitative hazard analysis using the HAZOP technique, which is a typical method for a qualitative risk assessment and analysis of the potential risks encountered in these chemical plants. For this purpose, a domestic chemical plant, which produces the acrylic resin by a radical batch reaction process, was selected and a risk assessment and analysis according to the procedure of HAZOP method was performed for the process. As the result of the study, to prevent the hazard, the input of inert gas and the installation of a pressure gauge were indispensable. In addition, the initiator and monomer should also be separated, and inhibiting substances and equipment are also necessary to prevent a runaway reaction.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.388-396
• /
• 2007

KSTAR (Korea Superconducting Tokamak Advanced Research) current lead system (CLS) has a role to interconnect magnet power supply (MPS) in room temperature (300 K) and superconducting (SC) bus-line, electrically. For the first plasma experiments, it should be assembled 4 current leads (CL) on toroidal field (TF) current lead box (CLB) and 14 leads on poloidal field (PF) CLB. Two current leads, with the design currents 17.5 kA, and SC bus-lines are connected in parallel to supply 35 kA DC currents on TF magnet. Whereas, it could supply $20\;{\sim}\;26\;kA$ to each pairs of PF magnets during more than 350 s. At the cold terminals of the leads, there are joined SC bus-lines and it was constructed helium coolant control system, aside from main tokamak system, to protect heat flux through current leads and enhanced Joule heat due to supplied currents. Throughout the establishment processes, it was tested the high vacuum pumping, helium leak of the helium lines and hardwares mounted between the helium lines, flow controls for CL, and liquid nitrogen cool-down of possible parts (current leads, CL helium lines, and thermal shield helium lines for CLB), for the accomplishment of the required performances.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.703-707
• /
• 2002

This paper proposes new method for predicting sound power emitted from the control valve and piping system. The sound power level measurement method using the reverberation chamber is much easy to apply in the field compared to the method using the anechoic chamber. Measured sound power was used to determine the coefficients of the equation predicting sound power level. The noise prediction equation was developed at relative flow coefficient, 0.11. The sound power level predicted is in good agreement with the measured value. Proposed method can be used to express the noise characteristics of the control valves.

• Journal of Energy Engineering
• /
• v.21 no.1
• /
• pp.75-80
• /
• 2012

In this paper a realistic bounding method for flooding analysis following rupture of large size of thanks and piping is defined. Mass and energy release during main feedwater line break accident is analyzed with RETRAN code. It is modeled that the main feed water control valve is closed in 5.0 seconds after reactor trip. In result of the analysis, largest mass and energy is discharged at 70% reactor power. The flood sources for main feedwater room are calculated when piping failure occurs in the high energy line and medium energy line. Based on the result of flood level (1.43m), it is investigated that all of the safety-related environmental qualification equipments are well located above the flood level.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2015_2016
• /
• 2009

전기방식이 실시되고 있는 상수도 관로는 관의 노후화, 코팅의 열화, 부적절한 방식시스템의 적용 및 타 시설물과의 간섭 등으로 부분적으로 방식전위 미달구간이 존재한다. 이러한 방식전위 미달구간에 대하여 토양환경 측정 및 방식소요전류량 산정, 간섭 시험 등을 통하여 토양환경은 부식이 '발생하는 구간' 및 '미약하게 발생'하는 구간으로 나타났다. 임시 가통전 시험을 통하여 방식소요전류량을 구할 수 있었다. 간섭영향 시험으로 간섭 여부 및 전식 발생지점을 추정할 수 있다. 현장 측정 결과와 설계기준을 바탕으로 적절한 전기방식 보강 계획을 수립하여 현장에 부분적으로 설치하였으며 방식상태를 분석하였다. 단순히 설계된 소요전류량만을 증가시키는 방안보다 부분적인 방식보강 및 주변 배관 상태를 고려하여 적절한 통합 방식방안을 적용하는 것이 더 효율적인 것으로 나타났다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.452-454
• /
• 2012

본 논문에서는 열분해 및 촉매반응의 의한 Hydrazine의 Ammonia 전환율을 연구하였다. 원자력발전소 2차 계통은 물/증기 순환계통으로 기기 및 배관의 부식을 억제하고, 증기발생기(Steam Generator, SG)의 부식생성물 유입을 최소하기 위해 전휘발성처리법(All Volatile Treatment, AVT)을 적용하여 계통수의 pH를 약염기성으로 유지하고 있다. 또한 Hydrazine을 이용하여 계통수의 용존산소제거 및 환원성 분위기를 유지하고 있다. 현재 사용되는 AVT는 대부분 단일 아민(Ammine)으로 계통 전 영역에서 pHt를 약염기성으로 유지하기 어렵다. 따라서 복합 아민을 이용하여 단일 아민의 상호단점을 보완한 수처리법을 적용해야한다. 하지만 복합 아민을 적용할 경우 추가 아민 주입설비, 설치부지, 시설유지보수 및 관리가 요구되므로 기존 주입약품을 이용하여 아민을 공급할 수 있는 연구가 필요하다. 따라서 본 연구에서는 Hydrazine의 열분해 및 촉매반응을 이용한 Ammonia 전환율을 조사하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.11a
• /
• pp.553-556
• /
• 2009

In this study, ignition tests of a gas turbine combustor were performed to evaluate an ignition loop at low temperature condition. An experimental setup was constructed to simulate low temperature condition with a heat exchanger using dry ice as a coolant. Various low temperature conditions could be created by controlling the amount of air though the heat exchanger. The results showed that ignition limit decreased with air temperature.

• 월간 기계설비
• /
• s.267
• /
• pp.65-71
• /
• 2012

지난 8월 13일 서울 종로구 소격동 국립현대미술관 서울관 공사현장에서 화재 발생으로 4명이 숨지고 18명이 중경상을 입는 등 많은 인명피해를 냈다. 이처럼 인명피해가 컸던 것은 우레탄 공사를 하던 밀폐공간에서 불이 나면서 발생한 유독가스 때문에 사람들이 제대로 대피하지 못했기 때문이다. 사고발생 원인으로 '용접공사' 여부를 놓고 공방을 벌였으나 경찰은 '전기합선'이라는 잠정 결론을 내렸다. 지난 2008년 1월에 발생한 경기도 이천 냉동창고 화재는 40명의 목숨을 앗아갔다. 화재 원인은 냉동배관을 설치하면서 전기 용접을 하기 위해 불을 붙였다가 공기 중에 차 있던 유증기(기름증기)와 만나면서 폭발이 일어난 것이었다. 인화성 액체(유기용제)를 취급하는 건설현장에서는 다량의 유증기가 발생할 수 있을 뿐만 아니라 건조한 조건일 경우 정전기에 의한 화재 폭발 누출사고의 발생 위험이 높다. 기계설비공사에서 화재, 폭발 위험성이 가장 큰 공사는 용접공사이기에 용접공사를 할 때 화재, 감전의 위험성을 배제한 후 공사에 들어간다. 용접으로 인한 사망사고의 유형으로는 용접 중 추락사고와 더불어 용접 불꽃이 가연성 물질에 옮겨 붙어 화재 발생으로 인한 질식사, 용접작업 중 절연체가 파손된 용접기 홀더 충전부의 접촉으로 인한 감전사 등이 있다. 본지는 용접으로 인한 화재 감전 등의 사고발생을 미연에 방지하기 위해 안전작업 수칙 및 안전수칙 체크리스트, 재해사례를 지난호부터 시리즈로 연재하고 있다.

• Journal of the Society of Disaster Information
• /
• v.12 no.2
• /
• pp.122-129
• /
• 2016

In this study, a dual structured pipe for a preventive monitoring on a accident damage, a smartphone app program for a survey and a construction data collection and a server program for a real-time monitoring were developed. A pilot system was installed in the test field to analyze effects of a system developed in this study. The data for a damage prevention was detected by the attached sensors on the pipe. Exclusion was tested by the pressure sensors to be installed at regular intervals. The app and server programs was enabled to the real-time data collection and real-time monitoring linked by VRS survey equipments and a smartphone.

• Plant Journal
• /
• v.8 no.2
• /
• pp.52-58
• /
• 2012

Pipe means the connection of the tube in order to transfer fluid from one device to another device. The piping stress analysis is to analyze the structural stability considering the location and the features of piping support after completing the piping design, The allowable stresses comply with the requirements of the relevant standards by examining whether the support of the function and location of pipe or re-operation is confirmed. Allowable stresses are to make sure that the maximum stress should not exceed the allowable stress presented in the ASME B31.1 POWER PIPING code. ASME B31.1 POWER PIPING code ensures a smooth stress analysis can be performed during the initial pipe stress analysis as provided in the case of straight pipe to the horizontal distance between the supports. However, because there is no criteria set in the case of curved pipe, the optimum pipe supporting points were studied in this paper. As mentioned about the curved pipe, loads applied to the support of the position of 17% and 83% of the position relative to the elbow part have results similar to the load acting on the support of straight pipe.