• 제목/요약/키워드: 박용 엔진

검색결과 79건 처리시간 0.029초

박용 디젤기관에서 스월유동이 연소특성에 미치는 영향 (The Effect of Swirl Flow on Combustion Characteristics in a Marine Diesel Engine)

  • 김병현;박권하;이상수;성낙원
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제24권2호
    • /
    • pp.38-49
    • /
    • 2000
  • A diesel engine has been studied for many years to improve fuel economy and to reduce emissions as important factors governing the emission performance of diesel engines. This study addresses to swirl effects on combustion characteristics in a large diesel engine. The transport equations of flows and chemical reactions are given for fully compressible fluid. The simulations have been done for compression and expansion strokes and the results are given at several crank angles which are the angles at just before injection start, TDC, ATDC 90 and just before exhaust valve open. The results show that the strength of the swirl flow makes many effects on burning fuel and forming emissions.

  • PDF

Cu-Chabazite SCR Catalysts의 황 피독 및 탈황에 의한 NOx 저감 성능에 관한 연구 (A study of NOx performance for Cu-chabazite SCR catalysts by Sulfur poisoning and desulfation)

  • 남정길
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제37권8호
    • /
    • pp.855-861
    • /
    • 2013
  • 저온에서 NOx 저감률이 높은 작은 기공을 갖는 Cu-chabazite SCR 촉매는 150 에서 $300^{\circ}C$ 범위의 낮은 배기가스 온도를 갖는 박용 디젤엔진에 적용성이 높다. 불행하게도, 박용디젤엔진용 연료는 체적베이스로 1.5% 이상의 높은 레벨의 황을 함유 할 수 있다. 이것은 공연비 50:1로 엔진 운전시에 배기가스에 이산화황의 레벨이 500 ppm에 해당된다. 배기가스에 포함되어 있는 높은 레벨의 이산화황은 Cu-chabazite SCR 촉매의 NOx 저감률을 감소시키는 역할을 할 수 있다. 본 연구에서는 Cu-chabazite SCR촉매의 황 피독에 의한 NOx 저감 성능을 연구하기 위하여 벤치플로 시스템을 구축하였다. Cu-chabazite SCR 촉매를 황 피독 시키기 위하여 5% 이산화탄소, 14% 산소, 5% 물과 나머지 질소로 만들어진 배기가스에 500 ppm의 이산화황을 각각 150, 200, 250, $300^{\circ}C$에서 2시간씩 노출 시켰다. 황 피독후 Cu-chabazite SCR 촉매의 불활성 한계를 측정하기 위하여 저온(150~$300^{\circ}C$)에서 NOx 저감 성능을 평가하였다. 또한, 600 과 $700^{\circ}C$에서 각각 30분씩 탈황 작업을 수행하여, 황 피독된 Cu-chabazite SCR 촉매의 NOx 저감 성능이 회복될 수 있는 온도를 결정하였다.

조합형 소음기를 이용한 박용 디젤 엔진 배기 소음 제어 (Exhaust Noise Control of Marine Diesel Engine Using Hybrid Silencer)

  • 이태경;주원호;배종국
    • 한국소음진동공학회논문집
    • /
    • 제19권7호
    • /
    • pp.679-684
    • /
    • 2009
  • Low frequency exhaust noise of marine diesel engine is one of the most important noise sources in vessels. However, conventional absorptive silencers are ineffective to control exhaust noise because of low absorption in the low frequency range. In the paper, exhaust noise control of marine diesel engine was studied by using the hybrid silencer, which was composed of virtually divided array of concentric hole-cavity resonators and conventional absorptive silencer. A series of tests including field tests were performed to investigate the acoustic performance of the hybrid silencer. Consequently, its high performance of 5${\sim}$10 dB noise reduction in the low frequency range was confirmed and it is expected to be very helpful in reducing the exhaust noise of marine diesel engine.

엔진제어 알고리즘 설계를 위한 연소모델 개발 (Development of Combustion Model for Engine Control Algorithm Design)

  • 박용국
    • 한국자동차공학회논문집
    • /
    • 제18권3호
    • /
    • pp.26-36
    • /
    • 2010
  • This paper provides a description of the combustion model to obtain an accurate dynamic engine phenomena that satisfies real-time simulation for model-based engine control. The combustion chamber is modeled as a storage device for mass and energy. The combustion process is modeled in terms of a two-zone model for the burned and unburned gas fractions. The mass fraction burnt is modeled in terms of a Wiebe function. The instantaneous net engine torque is calculated from the engine speed and the instantaneous piston work. The modeling accuracy has been tested with a cylinder pressure data on a test bench and also the ability of real-time simulation has been checked. The results show that combustion model yields sufficiently good performance for the model-based control logic design. However the influence factors effected on model accuracy are some room for improvement.

집중탐구 4_정유산업 바로알기 - 정유산업, 위기속 '신(新)성장엔진' 장착으로 '부활'

  • 박용환
    • 석유와에너지
    • /
    • 통권277호
    • /
    • pp.48-53
    • /
    • 2010
  • 정유산업은 새로운 도전에 직면해 있다. 2000년대 들어 중국 경의 급속 성장에 힘입은 '정유업 황금기'를 구가했지만, 2008년 하반기 이후 세계 경기침체로 인한 '암흑시대'로 접어들었다. 경기침체로 수요가 둔화되는 반면, 중국을 비롯한 중동의 신증설이 본격화되며, 공급과잉 시대로 진입한데 따른 것이다. 아울러, 세계 경제의 패러다임이 '환경'으로 급속 재편되고 있는 점은 전통적인 정유산업에 위기감을 불러일으키고 있다. 화석연료 고갈과 함께, '온실가스' 감축이라는 시대적 요구는 정유산업에 일대 도전이다. '어두운 터널'을 지난다고 하면, 참고 견디면 되겠지만, 현 시대적 도전은 국내 정유업에 새로운 엔진을 요구하고 있다. 저(低) 마진 시대의 본업 경쟁력을 확보하기 위한 고도화 설비 확충에 속도를 내고 있으며, 에너지의 안정적인 확보를 위한 석유개발 및 화석연료로 대변되던 에너지의 근본적 전환의 시기에 주도권을 선점하기 위해 신재생에너지 사업에도 발 빠른 움직임을 보이고 있다. 석유개발에서부터 석유화학제품까지 일괄체제를 구축하는 동시에 다음 세대 에너지 개발을 통해 종합에너지사로 DNA를 바꾸고 있는 것이다.

  • PDF

Mach2.2 램제트엔진 항공흡입구 모형의 공기역학적 특성 (Aerodynamic characteristics of Air Inlet Model for Ramjet Engine Mach Number of 2.2)

  • 박종호;신완순;신필권;박용철;김윤곤
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 1998년도 제11회 학술강연회논문집
    • /
    • pp.12-12
    • /
    • 1998
  • 무기체계의 추진체로서 고체 로켓트 추진기관이 제작의 용이성, 구조의 간단성, 이에 따른 저렴한 제작비, 그리고 고 신뢰도 확보가능 등의 여러 장점으로 대부분의 현존 전술 유도무기에 채택되어 사용되어 오고 있으나 대응, 방어 무기체계의 빠른 발전으로 이에 따른 새로운 추진기관의 유도무기체제가 요구되고 있다. 램제트 기관은 공기흡입추진기관으로 상대적으로 높은 비추력(1000-2000s)과 추력 중량비(∼20)을 가지며, 이로 인해 기존의 로켓 엔진에 비해 4-5배의 성능을 낼 수 있으며, 초음속 장거리 비행에 적합하다며, 또한 높은 속도영역까지 운용가능하고 구조가 비교적 간단하다.

  • PDF

선박 발전용 4행정 디젤엔진의 IMO 운전모드에 따른 NOx 배출특성에 관한 연구 (A Study on the Characteristic of NOx Emissions by IMO Operating Modes in a Four Stroke Marine Power Generation Diesel Engine)

  • 김현규;김규보;전충환;장영준
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권3호
    • /
    • pp.457-465
    • /
    • 2004
  • Environmental protection on the ocean has been interested and nowadays the International Maritime Organization(IMO) has advanced on the prevention of air pollution from ships. This study presents the performance and the emission characteristics of 4 stroke marine diesel engines for generation application in D2 cycle(IMO mode). The effects of important operating parameters, such as intake air pressure. intake air temperature and maximum combustion pressure on NOx emissions were also described. Emissions measurement and calculation are processed according to IMO Technical Code. The results show that the maximum combustion pressure by fuel injection timing control and intake air temperature has strong influence on NOx emission production. But NOx emission is not affected by intake air pressure and exhaust gas back pressure.

공명형 소음기를 이용한 박용 디젤엔진 배기 소음 제어 (Exhaust Noise Control of Marine Diesel Engine by using Resonator Type Silencer)

  • 이태경;주원호;배종국
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 춘계학술대회논문집
    • /
    • pp.350-354
    • /
    • 2008
  • Low frequency exhaust noise of marine diesel engine is one of the most important noise sources in vessels. However, conventional absorptive silencers are limited because the absorptive material is not effective in low frequency range. In the paper, exhaust noise control of marine diesel engine has been studied by using the resonator type silencer, which was composed of concentric hole-cavity resonators. The acoustic performance of the resonator type silencer was verified by the insertion loss measurement considering flow effect. Consequently, its high performance, about $5{\sim}8dB$ noise reduction, in the low frequency range was confirmed by insertion loss measurements conducted in the ship.

  • PDF

EGR율 변화에 대한 액상 LPG분사 엔진의 운전 및 배출가스특성 (Performance and Emission Characteristics of Liquid-Phase LPG Injection Engine with Different EGR Rate)

  • 염기태;우영민;장진영;박용국;배충식
    • 한국자동차공학회논문집
    • /
    • 제11권5호
    • /
    • pp.7-14
    • /
    • 2003
  • Exhaust Gas Recirculation (EGR) system is used to reduce NOx emission, to improve fuel economy, and to suppress knock since it offers the benefits of the inlet charge dilution. The effects of EGR was investigated on the performance and emission to reduce exhaust thermal load with a single cylinder liquid-phase LPG injection engine, in a wide range of EGR rate, engine conditions and LPG proportions. As EGR rate was increased, NOx was reduced while HC was increased. Pumping loss reduction by EGR improved bsfc and increased EGR lowered exhaust gas temperature. And, LPG proportions were made a difference on the performance and emission characteristics.

흡기유량에 따른 디젤엔진에서의 배출가스 특성에 대한 연구 (The Study on the Exhaust Emission Characteristics in Diesel Engine According to Intake Air Mass Flow)

  • 김형준;박용희;엄명도;고종민;황진우;이상현;길지훈;김정수
    • 한국분무공학회지
    • /
    • 제18권1호
    • /
    • pp.16-20
    • /
    • 2013
  • The investigation was conducted to analyze the exhaust emission characteristics in diesel engine according to intake air mass flow. In this study, the test diesel engine with a 5,899 cubic centimeter displacement and power of the 260 ps was used to analyze the emission characteristics according to the intake air mass flow. In addition, the test modes were applied by the ND-13 and ETC mode. In order to analyze the emission characteristics, the engine dynamometer with 440 kW and emission gas analyzer (AMA-4000) were utilized. From the experimental results, it is revealed that the NOx and HC emissions in the intake air mass flow of large amount have high levels compared to those in the intake air mass flow of small amount in the ND-13 mode. However, the PM emission was shown the opposite trend in the NOx and HC emission due to the trade-off relation between the NOx and PM.