• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.409-421
• /
• 2022

Achieving a highly resolved spatial distribution of Mn-bearing minerals and elements in the natural ferromanganese nodules can provide detailed knowledge of the temporal variations of geochemical conditions affecting the formation processes of nodules. While a recent study utilizing Raman spectroscopy has reported the changes in the manganate mineral phases with growth for spherical nodules from the Arctic Sea, the distributions of minerals and elements in the nodules from the shallow Arctic Sea with non-spherical forms have not yet fully elucidated. Here, we reported the micro-laser Raman spectra with varying data acquisition points along three different profiles from the center to the outermost rim of the non-spherical ferromanganese nodules collected from the East Siberian Sea (~73 m). The elemental distributions in the nodule (such as Mn, Fe, etc.) were also investigated by energy dispersive X-ray spectroscopy (EDS) analysis to observe the internal structure and mineralogical details. Based on the microscopic observation, the internal structures of a non-spherical nodule can be divided into three different regions, which are sediment-rich core, iron-rich substrate, and Mn-Fe layers. The Raman results show that the Mn-bearing mineral phases vary with the data acquisition points in the Mn-Fe layer, suggesting the changes in the geochemical conditions during nodule formation. In addition, we also observe that the mineral composition and structural characteristics depend on the profile direction from the core to the rim. Particularly, the Raman spectra obtained along one profile show the lack of Fe-(oxy)hydroxides and the noticeably high crystallinity of Mn-bearing minerals such as birnessite and todorokite. On the other hand, the spectra obtained along the other two profiles present the presence of significant amount of amorphous or poorly-ordered Fe-bearing minerals and the low crystallinity of Mn-bearing minerals. These results suggest that the diagenetic conditions varied with the different growth directions. We also observed the presence of halite in several layers in the nodule, which can be evidence of the alteration of seawater after nodule formation. The current results can provide the opportunity to obtain detailed knowledge of the formation process and geochemical environments recorded in the natural non-spherical ferromanganese nodule.

• Journal of Life Science
• /
• v.32 no.11
• /
• pp.872-881
• /
• 2022

In this study, we optimized the composition of the indole-3-acetic acid (IAA) production medium using response surface methodology on Pantoea agglomerans SRCM 119864 isolated from soil. IAA-producing P. aglomerans SRCM 119864 was identified by 16S rRNA gene sequencing. There are 11 intermediate components known to affect IAA production, hence the effect of each component on IAA production was investigated using a Plackett-Burman design (PBD). Based on the PBD, sucrose, tryptone, and sodium chloride were selected as the main factors that enhanced the IAA production at optimal L-tryptophan concentration. The predicted maximum IAA production (64.34 mg/l) was obtained for a concentration of sucrose of 13.38 g/l, of tryptone of 18.34 g/l, of sodium chloride of 9.71 g/l, and of L-tryptophan of 6.25 g/l using a the hybrid design experimental model. In the experiment, the nutrient broth medium supplemented with 0.1% L-tryptophan as the basal medium produced 45.24 mg/l of IAA, whereas the optimized medium produced 65.40 mg/l of IAA, resulting in a 44.56% increase in efficiency. It was confirmed that the IAA production of the designed optimal composition medium was very similar to the predicted IAA production. The statistical significance and suitability of the experimental model were verified through analysis of variance (ANOVA). Therefore, in this study, we determined the optimal growth medium concentration for the maximum production of IAA, which can contribute to sustainable agriculture and increase crop yield.

• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.35-43
• /
• 2022

In this study, a survey was conducted and analyzed to find out the satisfaction of online classes among students enrolled in the radiology department of a university located in Busan city. As a result, in terms of satisfaction with online classes, male scores were higher, but there was no statistically significant difference. In the interdisciplinary system, the satisfaction score of the students enrolled in Bachelor's degree was high, and there was a statistically significant difference except for the satisfaction of learning participation (p<0.001, p<0.05). For class satisfaction by grade level, Senior had higher scores, and there were statistically significant differences except for learning participation satisfaction (p<0.001, p<0.01, p<0.05). In the satisfaction survey according to the number of lectures, the scores of the students who took 4-7 lectures were found to be high except for the satisfaction of learning participation, and there was a statistically significant difference (p<0.01, p<0.05). In the method of communication with the instructor, students who used e-mail showed high scores, and there was a statistically significant difference in lecture satisfaction (p<0.05). In the correlation analysis between sub-variables for online classes, statistically significant correlations were established in all areas. Most of the students preferred class methods such as recorded classes and classes using external content such as YouTube, and when asked about the merits of online classes, many students answered that the advantages of online classes were repetitive classes and no restrictions on time and place. When asked about the shortcomings of online classes, many students answered that it was a lack of concentration and lack of communication with the instructor. This study was conducted to provide basic data to improve the satisfaction of online classes that will increase in the future. Therefore, based on the results of this study, it is expected that more quality online classes will be produced so that students' satisfaction with online classes can be improved.

• Maritime Security
• /
• v.4 no.1
• /
• pp.57-82
• /
• 2022

The objective of this treatise is to explore the limitations of the current navy manpower utilization system and the ways to improve it from the perspective of Generation Z. As Generation Z, following Millennials, has finally come of age, this new group is constituting a gradually greater proportion of military personnel. Due to the typical characteristics of naval operations, the harmony between Millennials and Generation Z, which is differentiated from Generation X in view of dispositions and traits, is one of the essential issues to be discussed. Generally, in a naval vessel, there are numerous pieces of equipment necessary to carry out a wide range of missions and a large number of crew members who operate them with consistent levels of fighting power. This is all while members are living together within the narrow space throughout the 24 hours of each day. Under such particular circumstances, any inter-generational conflicts may have a disruptive effect on the successful accomplishment of naval missions. Currently, new generations of military personnel are facing social difficulties in different aspects compared with the previous generations, and also have different viewpoints on the military. In this regard, in order to foster true harmony between generations, it is considered necessary to take a closer look at the inter-generational differences from their respective standpoints and to examine whether the military organization has taken adequate steps to respond to such changes. Accordingly, Chapters 1 and 2 cover the environments in which Millennials and Generation Z were raised during their childhood to young adulthood, which are distinct from those of older generations, their viewpoints formed based on such backgrounds, and the need to resolve various conflicts between generations. In Chapter 3, the current actions taken by overseas military powers to enhance the coexistence with Generation MZ are analyzed to find the significant implications they had. Chapter 4 examines the operation environments specific to the navy; identifies the potential barriers to achieving harmony between generations by assessing the current status of personnel utilization in the Korean navy in terms of the seaman, petty officer, and the officer, as well as policy; and outlines the solutions to drive harmony. Finally, Chapter 5 emphasizes the need to establish a genuine empathy between generations based on the understanding of unique inter-generational characteristics. This section also discusses the importance of addressing difficulties in utilizing technology-centered naval manpower, and forecasts a scenario of a naval organization that resolves the problem of utilizing naval personnel and the inter-generational conflicts in the future.

• Land and Housing Review
• /
• v.13 no.2
• /
• pp.49-64
• /
• 2022

To effectively lead "Innovative City Season 2", it is important to investigate whether the creation of an innovative city has a positive effect on the revitalization of the hinterland town economy. This study explores the effects (external effects) of increases in the number of workers at public institutions in the innovative city of Jeollabuk-do, located closest to the hinterland town (Jeonju-si). In the results, we show that increases in the number of workers positively affected the commercial real estate market, which is one of the barometers that show the revitalization level. On the other hand, the effect was found to be limited to the new downtown commercial real estate market with good accessibility and modernized facilities and services. This suggests that the innovative city adjacent to the hinterland town meets the purpose of the innovative city to some extent by generating a positive external effect, especially in accessible and modernized areas. To further expand the positive spillover effects of an innovative city on the hinterland town, it is necessary to expand public institutions for relocation, improve settlement conditions, and establish a practical cooperation system between specialized public institutions and hinterland-related industries.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.49-62
• /
• 2022

The hollow modular concrete block reinforced foundation method is one of the ground reinforcement foundation methods that uses hexagonal honeycomb-shaped concrete blocks with mixed crushed rock to reinforce soft grounds. It then forms an artificial layered ground that increases bearing capacity and reduces settlement. The hollow modular honeycomb-shaped concrete block is a geometrically economical, stable structure that distributes forces in a balanced way. However, the behavioral characteristics of hollow modular concrete block reinforced foundations are not yet fully understood. In this study, a bearing capacity test is performed to analyze the reinforcement effectiveness of the hollow modular concrete block through the laboratory model tests. From the load-settlement curve, punching shear failure occurs under the unfilled sand condition (A-1-N). However, the filled sand condition (A-1-F) shows a linear curve without yielding, confirming the reinforcement effect is three times higher than that of unreinforced ground. The bearing capacity equation is proposed for the parts that have contact pressure under concrete, vertical stress of hollow blocks, and the inner skin friction force from horizontal stress by confining effect based on the schematic diagram of confining effect inside a hollow modular concrete block. As a result of calculating the bearing capacity, the percentage of load distribution for contact force on the area of concrete is about 65%, vertical force on the area of hollow is 16.5% and inner skin friction force of area of the inner wall is about 18.5%. When the surcharge load is applied to the concrete part, the vertical stress occurs on the area of the hollow part by confining effect first. Then, in the filled sand in the hollow where the horizontal direction is constrained, the inner skin friction force occurs by the horizontal stress on the inner wall of the hollow modular concrete block. The inner skin friction force suppresses the punching of the concrete part and reduces contact pressure.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.214-230
• /
• 2022

This paper discusses the characteristics and background of the production of white porcelain with the "Byeol(別)" inscription. Such porcelain was produced by the government-run porcelain kiln, Gwanyo(官窯), in the 16th and 17th centuries (from the 1560s to the 1640s), during the Joseon dynasty. The white porcelain ware, inscribed with either the term Byeol or "jwa(左)" and "u(右)," constituted a dual production system of white porcelain by Gwanyo starting in the 1560s. However, to date, few studies have examined Byeol-inscribed white porcelain. This, therefore, makes it difficult to achieve a comprehensive understanding of the evolution of inscriptions on the white porcelain produced by Gwanyo in the 15th to 17th centuries. Besides a regular annual stock of porcelain(年例進上磁器), Gwanyo also produced and supplied additional porcelain ware, or Byeol-gi, at the behest of the royal family or the court of Joseon. Byeol-inscribed white porcelain is a form of Byeol-gi, produced through extra firing, or Byeolbeon(別燔). According to use, Byeol-gi can be categorized as an item for national use(國用) or an item for internal use(內用). However, if the porcelain only carries the "Byeol(別)" inscription, it is difficult to identify its characteristics. Furthermore, as part of the annual production of porcelain was for the supply of Byeol-gi, and then for other purposes, the white porcelain came to be inscribed with dots indicating a change in ownership. In the 16th century, the royal family increased its consumption of white porcelain based on Shinyu Gongan(辛酉貢案), the government's fiscal reform measures. To guarantee a stable supply of exceptional Byeol-gi in light of Gwanyo's decline in the 1560s, the royal family benefited from the inscription of "Byeol." The white porcelain produced by Gwanyo was divided into annual offerings-those with the inscriptions "jwa(左)" and "u(右)"-and Byeol-gi, those with the inscription of "Byeol." They were managed separately from the commencement of production. Byeol-inscribed white porcelain was produced until the 1640s. During the mid-and late 1640s, Byeolbeon was temporarily suspended. Starting in the 1650s, the white clay used to produce the annual stock of white porcelain was sourced from regions other than those providing the clay for Byeol-gi production. The former used clay from Wonju(原州土) and Seosan(瑞山土), while the latter used clay from Gyeongju(慶州土) and Seoncheon(宣川土). According to the literature, the clay from Gyeongju and Seoncheon was much cleaner than that from Wonju and Seosan. Byeolbeon thus underwent a transformation, whereby production was separately managed, right from the stage of white clay mining. Ultimately, the need for the separate management of Byeol-gi through inscriptions diminished, resulting in the disappearance of Byeol-inscribed white porcelain.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.303-317
• /
• 2022

Climate change caused by increased greenhouse gas emissions can alter the natural ecosystem, including the pollination ecosystem and agricultural ecology, which are ecological interactions between potted insects and plants. Many studies have reported that populations of wild bees, including bees and wasps (BW), which are the key pollinators, have gradually declined due to climate change, leading to adverse impacts on overall biodiversity, ultimately with agribusinesses and the life cycle of flowering plants. Therefore, we could infer that the rising temperature in Korean Peninsula (South Korea) due to global warming has led to climate change and influenced the wild bee's ecosystem. In this study, we surveyed the distributional pattern of BW (Superfamily: Apoidea, Vespoidea, and Chrysidoidea) at 51 sites from 2017 (37 sites) to 2018 (14 sites) to examine the effects of climatic factors on the nationwide distribution of BW in South Korea. Previous literature has confirmed that their distribution according to forest climate zones is significantly correlated with mean and accumulative temperatures. Based on the result, we predicted the effects of future climate changes on the BW distribution that appeared throughout South Korea and the species that appeared in specific climate zones using Shared Socioeconomic Pathways (SSPs). The distributions of wild BW predicted by the SSP scenarios 2-4.5 and 5-8.5 according to the BIOMOD species distribution model revealed that common and endemic species will shift northward from the current habitat distribution by 2050 and 2100, respectively. Our study implies that climate change and its detrimental effect on the ecosystem is ongoing as the BW distribution in South Korea can change, causing the change in the ecosystem in the Korean Peninsula. Therefore, immediate efforts to mitigate greenhouse gas emissions are warranted. We hope the findings of this study can inspire further research on the effects of climate change on pollination services and serve as the reference for making agricultural policy and BW conservation strategy

• Science of Emotion and Sensibility
• /
• v.25 no.1
• /
• pp.41-54
• /
• 2022

The purpose of this study was to propose a "user experience (UX)-centered product development process" so that the product design development process using the service design process can be systematized and used in practice. In a situation in which usability research on office phones is lacking compared to general home phones, this study expands to a product-based service design point of view rather than simple product development, intending to research ways to provide user experience value through office phone design in smart office. This study focused on extracting UX-centered user needs using the service design process and developing product design that realizes user experience value. In particular, the service design process was applied to systematically extract user needs and experience value elements in the product development process and to discover ideas that were converged with product-based services. For this purpose, the "Double Diamond Design Process Model," which is widely used in the service design field, was adopted. In addition, a product design development process was established so that usability improvement plans, user experience value elements, and product-service connected ideas could be extracted through a work-flow in which real users and people from various fields participate. Based on the double diamond design process, in the "Discover" information collection stage, design trends were identified mainly in the office phone markets. In the "Define" analysis and extraction stage, user needs were analyzed through user observation, interview, and usability survey, and design requirements and user experience issues were extracted. Persona was set through user type analysis, and user scenarios were presented. In the "Develop" development stage, ideation workshops and concept renderings were conducted to embody the design, and people from various fields within the company participated to set the design direction reflecting design preference and usability improvement plans. In the "Deliver" improvement/prototype development/evaluation stage, a working mock-up of a design prototype was produced and design and usability evaluation were conducted through consultation with external design experts. It is meaningful that it established a "UX-centered product development process" model that converged with the existing product design development process and service design process. Ultimately, service design-based product design development process was presented so that I Corp.'s products could realize user experience value through service convergence.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.3
• /
• pp.247-262
• /
• 2022

In domestic tunnels, it is mandatory to install CCTVs in tunnels longer than 200 m which are also recommended by installation of a CCTV-based automatic accident detection system. In general, the CCTVs in the tunnel are installed at a low height as well as near by the moving vehicles due to the spatial limitation of tunnel structure, so a severe perspective effect takes place in the distance of installed CCTV and moving vehicles. Because of this effect, conventional CCTV-based accident detection systems in tunnel are known in general to be very hard to achieve the performance in detection of unexpected accidents such as stop or reversely moving vehicles, person on the road and fires, especially far from 100 m. Therefore, in this study, the region of interest is set up and a new concept of inverse perspective transformation technique is introduced. Since moving vehicles in the transformed image is enlarged proportionally to the distance from CCTV, it is possible to achieve consistency in object detection and identification of actual speed of moving vehicles in distance. To show this aspect, two datasets in the same conditions are composed with the original and the transformed images of CCTV in tunnel, respectively. A comparison of variation of appearance speed and size of moving vehicles in distance are made. Then, the performances of the object detection in distance are compared with respect to the both trained deep-learning models. As a result, the model case with the transformed images are able to achieve consistent performance in object and accident detections in distance even by 200 m.