• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.3
• /
• pp.59-65
• /
• 2009

Recently, UAV(unmanned aerial vehicle) has evolved into various figure and become miniaturized. On using existing design method, it is hard to make modelling and standardizing design of flight control system of the figure including cylinder like pipe. These problems are caused by uncorrect express of nonlinearity in controller design. Therefore, it is developed through step of correct modelling and simulation on real time sing high efficiency computer in aircraft development of various figure. This is reducing period and expense of aircraft development. For the shake of solving these problems, in-design method has been devised by H.M. Wang. In this paper, an object of control is cylindrical UAV instead of the general figure of aircraft. It was analyzed flight condition, specification about level flight of the UAV and was presented algorithm to find control value.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.101-107
• /
• 2020

Road surface measurement is an essential process for quantifying the degree and displacement of roughness in road surface management. For safer road surface management and quick maintenance, it is important to accurately measure the road surface while mounted on a vehicle. In this paper, we propose a sophisticated road surface measurement system that can be measured on a moving vehicle. The proposed road surface measurement system supports more accurate measurement of the road surface by using a high-performance line laser sensor. It is also possible to measure the transverse and longitudinal profile by matching the position information acquired from the RTK, and the velocity adaptive update algorithm allows a manager to monitor in a real-time manner. In order to evaluate the proposed system, the Gocator laser sensor, MRP module, and NVIDIA Xavier processor were mounted on a test mobile and tested on the road surface. Our evaluation results demonstrate that our system measures accurate profile base on the MSE. Our proposed system can be used not only for evaluating the condition of roads but also for evaluating the impact of adjacent excavation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.205-206
• /
• 2018

Recently, interest in unmanned vehicles, autonomous vehicles and connected cars has increased, and autonomous driving capability is also increasing. Depending on the autonomous driving ability, the maximum number of steps is divided into 6 steps. The higher the step, the less the involvement of the person in the running, and the person does not need to be involved at the highest stage. Today's autonomous vehicles have been developed in stages 4 to 5, but solutions are not clearly defined in case of an accident, so only the test run is possible. Such an accident occurring during traveling is almost inevitable, and it is judged who has made a mistake in case of an accident, which increases the punishment for the accident. Although a black box is used to clarify such a part, it is easy to delete a photographed image, and it is difficult to solve an accident such as a hit-and-run. In this paper, we design a driving record system using black chain to solve such an accident.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.916-921
• /
• 2018

Recently, interest in autonomous vehicle has increased, and autonomous driving capability is also increasing. Depending on the autonomous driving ability, the maximum number of steps is divided into 6 steps. The higher the step, the less the involvement of the person in the running, and the person does not need to be involved at the highest stage. Today's autonomous vehicles have been developed high level, but solutions are not clearly defined in case of an accident, so only the test run is possible. Such an accident occurring during traveling is almost inevitable, and it is judged who has made a mistake in case of an accident, which increases the punishment for the accident. Although a black box is used to clarify such a part, it is easy to delete a record, and it is difficult to solve an accident such as a hit-and-run. In this paper, i design a driving record system using black chain to solve accidents.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.3
• /
• pp.259-267
• /
• 2020

For real-time precise positioning, N-RTK (Network Real-Time Kinematic) technology is widely used these days. However, the currently operating N-RTK system has a limitation in terms of the number of users. Therefore, if reference points generate correction messages with no limit on the number of users are developed later, it is determined that an appropriate reference point installation interval is required, so that the accuracy of the N-RTK system according to the baseline distance was analyzed. This experiment utilized receivers with varying performance that estimated the rover position, and RTKLIB, an open-source software, is used for processing data. As a result, the rover position was estimated accurately with a high rate of fixed ambiguity for all the receivers. When the reference station with a baseline length of 40 km was used, the vertical RMSE (Root Mean Squared Error) was quite similar to the short baseline case, but only half of the ambiguity fixing rate was achieved. The outlier in the estimated rover position was not observed for the longer baselines in the case of a high-end receiver. It is necessary to analyze the ambiguity fixing and the accuracy of the kinematic positioning with scientific GNSS processing software.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.256-265
• /
• 2021

Ground, sea and air mobility, such as vehicles, ships, and airplanes, are generally operated by people. Based on the innovative development of autonomous decision-making systems and artificial intelligence (AI) following the recent fourth industrial revolution, research and development on maritime autonomous surface ships (MASS) is been actively performed around the world. Before the realization of the commercialization of MASS in international maritime transport, it is urgent to clarify the characteristics of this ship and its international legal status. This paper aims to analyze the concern of whether a ship without crew members will eventually be operated as a fully unmanned ship or can be recognized as a ship under international law as the number of crew members is gradually reduced owing to the development stage of autonomous ships. Consequently, based on the United Nations Convention on the Law of the Sea (UNCLOS) and the regulations of the International Maritime Organization (IMO), it was found that MASS has the same international legal status as general ships. In addition this paper presents the working principles of enacting and revising the IMO Conventions and international legal measures necessary for the safe operation of MASS.

• Korean Journal of Microbiology
• /
• v.39 no.3
• /
• pp.141-147
• /
• 2003

The simultaneous expression levels of antifungal activity related genes was analyzed by DNA microarray. We constructed DNA chips contained 2,000 randomly digested genome spots of the antifungal bacterium of Bacillus lentimorbus WJ5 and compared its quantitative aspect with 7 antifungal activity deficient mutants induced by gamma radiation ($^{60}Co$). From the analysis of microarray hybridization by the Gene Cluster (Michael Eisen, Stanford Univ.), totally 408 genes were expressed and 20 genes among them were significantly suppressed in mutants. pbuX (xanthine permease, K222), ywbA (phosphotransferase system enzyme II, K393), ptsG (PTS glucose specific enzyme II ABC component, K877), yufO (ABC transporter (ATP-binding protein), K130l), and ftsY (signal recognition particle (docking protein), K868) were simultaneously down-regulated in all mutants. It suggested that they were supposed to be related to the antifungal activity of B. lentimorbus WJ5.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.11
• /
• pp.1697-1705
• /
• 2022

The safety of marine construction workers and marine pollution problems are occurring due to large-scale offshore construction. In particular, underwater construction work in the sea has a higher risk than other work, so it is necessary to apply an unmanned alternative system that considers the safety of the workers. In this paper, the ROV system for offshore construction has been developed for underwater unmanned work. A monitoring system was developed for position control through the control of underwater propellants, pneumatic gripper, and monitoring of underwater work. As a result of the performance evaluation, the underwater movement speed of the ROV was evaluated to be 0.89 m/s, and it was confirmed that the maximum load of the pneumatic gripper was 80 kg. In addition, the network bandwidth required for underwater ROV control and underwater video streaming was evaluated to be more than 300Mbps, wired communication at 92.7 ~ 95.0Mbit/s at 205m, and wireless communication at 78.3 ~ 84.8Mbit/s.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.324-326
• /
• 2006

CCD형 영상소자는 방사선 피폭 시 표면과 격자내부에 모두 손상을 받게 되며, 감마방사선이나 X선과 같은 고에너지의 이온화 방사선에 노출될 경우 격자 실리콘 내부에 전자-전공쌍(Electron-hole pair, EHP)이 발생된다. 이러한 EHP는 CCD의 순간 출력 광전류로 변환되어 백색 화소 형태의 영상잡음으로 가시화되며, 이 화소 수는 피폭 방사선량에 비례하여 증가하는 특성을 지니고 있다. 따라서 출력 영상정보를 분석하면 조사된 방사선의 양과 특성을 측정할 수 있다. 본 연구에서는 CCD를 이용하여 가상의 방사능 물질 누출 공간에서 방사선원의 방향과 거리정보를 고속으로 탐지하기 위한 장치와 고속 측정 알고리즘을 구현하고 실제 방사선장에서 실증시험을 수행하였다. 방사선 탐지기는 콘형 납 콜리메이터(Collimator)와 가시광 변환용 신틸레이터(CsITl) 및 차폐체로 구성된 센서부와 제어 및 방사광 신호처리를 수행하는 PC부로 구성된다. 감마방사선($^{60}Co$) 방사선장 실증시험에서 방사선원간 거리 83cm에서 측정된 거리 탐지는 5.3%의 오차로 확인되었다. 이 방사선 탐지기는 임의의 고방사선 누출사고에 대한 초기대응 작업을 수행하기 위한 무인 이동로봇용 방사선 탐지기로 활용이 가능하다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.1 s.35
• /
• pp.37-47
• /
• 2006

In the last years a low-altitude image acquisition technology has been developed in application of frequent change monitoring in urban area md speedy surveillance in disaster area. A low-altitude photogrammetric system have advantages of accurate observation and free data-acquisition time. Especially, an unmaned RC-helicopter, improving safety, durability and portability, comes into the spotlight as a built-in vehicle in close range photogrammetric application due to their capability of safe near-by observation and effective flight performance. This paper gives a methodology for generating image map by development of low cost and timesaving low-altitude photogrammetric UAV(unmaned aerial vehicles) for collecting high-resolution image data, and implement of geo-rectification and image mosaicking.