• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.63-68
• /
• 2017

Although automated metro subway systems have the advantage of operating a train without a train driver, it is difficult to detect an immediate fault condition and take countermeasures when an unusual situation occurs. Therefore, it is important to construct a maintenance information system (MIS) that detects the vehicle failure/status information in real time and maintains it efficiently in the depot of the railway's vehicles. This paper proposes a conceptual design method that realizes the interface between the train control system (TCS), the operation control center train control monitoring system (OCC-TCMS) console, and the MIS using wireless communication network in real-time. To transmit a large amount of information on 800,000 occurrences per day during operation, data was collected in a 56 byte data table using a data processing algorithm. This state information was classified into 4 hexadecimal codes and transmitted to the MIS by mapping the status and the fault information on the vehicle during the main line operation. Furthermore, the transmission and reception data were examined in real time between the TCS and MIS, and the implementation of the failure information screen was then displayed.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.3
• /
• pp.69-75
• /
• 2015

Road facilities for safe driving were designed for drivers to distinguish them during day and night, but they cannot play their role when the weather becomes worse. Recently, the road facilities have been designed by using electric and electronic technology so that they can be displayed well at a long distance, but they should be replaced very often due to their frequent breakdown. So, there are many problems in traffic calming and maintenance. In this study, to solve the above problems, semi-permanent LED beacon light was installed in the area where traffic accident are frequent, and monitoring system was developed so that the LED beacon light can be maintenanced by connecting with system. For the above installation and development, system was based on window operating system and it was developed for worker to operate it by using P.C. through connecting with wireless local area network. The result of this study led to analyzing state information on the battery of field-installed LED beacon light in real time, and manegement to effectively by predicting their life cycle.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1960-1972
• /
• 2006

In this thesis, GPS and the electronic mapping were used to realize such a system by recognizing license plate numbers and identifying the location of objects that move at synchronous times with simulated movement in the electronic map. As well, throughout the study, a camera attached to a PDA, one of the mobile devices, automatically recognized and confirmed acquired license plate numbers from the front and back of each cu. Using this mobile technique in a wireless network searches for specific plate numbers and information about the location of the car is transmitted to a remote sewer. The use of such a GPS-based system allows for the measurement of topography and the effective acquisition of a car's location. The information is then transmitted to a central controlling center and stored as text to be reproduced later in the form of diagrams. Getting positional information through GPS and using image-processing with a PDA makes it possible to estimate the correct information of a car's location and to transmit the specific information of the car to a control center simultaneously, so that the center will get information such as type of the cu, possibility of the defects that a car might have, and possibly to offer help with those functions. Such information can establish a mobile system that can recognize and accurately trace the location of cars.

• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.595-605
• /
• 2006

In this thesis, GPS and the electronic mapping were used to realize such a system by recognizing license plate numbers and identifying the location of objects that move at synchronous times with simulated movement in the electronic map. As well, throughout the study, a camera attached to a PDA, one of the mobile devices, automatically recognized and confirmed acquired license plate numbers from the front and back of each car. Using this mobile technique in a wireless network, searches for specific plate numbers and information about the location of the car is transmitted to a remote server. The use of such a GPS-based system allows for the measurement of topography and the effective acquisition of a car's location. The information is then transmitted to a central controlling center and stored as text to be reproduced later in the form of diagrams. Getting positional information through GPS and using image-processing with a PDA makes it possible to estimate the correct information of a car's location and to transmit the specific information of the car to a control center simultaneously, so that the center will get information such as type of the car, possibility of the defects that a car might have, and possibly to offer help with those functions. Such information can establish a mobile system that can recognize and accurately trace the location of cars.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.513-522
• /
• 2021

A smartphone (SMP) includes a MEMS sensor that can record 3-components motions and has a wireless network device to transmit data in live. These features and relatively low maintenance costs are the advantage of using SMPs as an auxiliary seismic observation network. Currently, 279 SMPs are monitoring seismic motions. In this study, we compare the SMP records with the seismic station (SS) records to validate SMP records. The data used for comparison are records for five earthquakes that occurred in 2019, which are 321 SS data recorded by the Korea Meteorological Administration and the Korea Institute of Geoscience and Mineral Resources and 145 recorded by SMPs. The analysis shows that the event-term corrected average residual of the SMP MEMS sensor records is 0.59 which indicating that the peak horizontal acceleration by SMP is 1.8 factor bigger than the peak ground acceleration by SS. In addition, the residuals tend to decrease as the installation floor of the smartphone MEMS sensor increases, which is the similar trend with response spectra from SS.

• Journal of Digital Convergence
• /
• v.12 no.4
• /
• pp.335-342
• /
• 2014

According to the recent trends in the growing elderly population, the chronically ill have increased. Thus the importance of the health care issues for them has emerged. In this paper, we want to implement a chronic disease management system using smart mobile devices. Proposed chronic disease management system is consisted of the biometric sensor, smart mobile devices, the patient management server, patient management DB, and patient symptoms analysis agent. The biometric sensor detects a biological information. Smart mobile devices receive the patient information from the sensor and transmit the information to the patient management server. The patient management server, patient management DB, and patient symptoms agent analysis agent analyze to process data delivered through a wireless communication network. Bio-signals includes modules of ECG, blood pressure, blood sugar and PPG. We are able to determine the current health status by monitoring measured biometric data through chronically ill health management system. We will focus on the individual service to be appropriate for a patient group in a mobile environment.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.4
• /
• pp.49-56
• /
• 1997

In mobile communications, it is very important that we predict the propagation environments of radiation pattern, in order to decide the service area, select the best location of the best station, design the cell etc. Therefore, by analyzing the propagation prediction model that is varied according to the kind of antenna, the beam angle, the terrain and obstacles, we expect that the economic operating of communication networks, the calling quality and the service of subscriber will be enhanced. In this paper, we select the around of Seji base station in Naju-city Chonnam for modern suburban area and measure the field strength to propose the optimal propagation prediction model for suburban areas. We propose the propagation prediction model that, it is not found in the other models until now, consists of the correction coefficient with the relative differences of antenna effective height of the base station and mobile station for minimizing errors. Finally, comparing the results of the field test with the computer simulation(PPGIS : Propagation Prediction Geographic Information System) results for the Hata model, the Egri model, the Carey model and the propose model, we confirm the property of the proposed model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.52-63
• /
• 2004

Packet loss process of cdma2000 mobile Internet channel deployed in Korea is modeled as a two state Markov process known as Gilbert model. This paper proposes the procedures to derive four parameters of the our modified Gilbert model from packet loss trace taken from two major cdma2000 networks in Korea. These four parameters are derived in various situations, that is, with fixed and moving terminals, in open field and urban areas. They can be used to produce synthetic packet loss patterns for study of the channel. Moreover, if they are calculated on-line during multimedia service, they can be used to make loss protection controls adaptive to network condition.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.6
• /
• pp.197-204
• /
• 2015

Recent changes in health care environment including aging population and prevalence of chronic disease encourage the adoption of new innovative technological solutions including wearable vital sensors, wireless networks, and smart phone. In this paper, we present an effective at-home lifestyle monitoring system that can be used for self-management and health intervention of patient himself in the Management-by-Exception perspectives. We implemented the filtering and queuing algorithms as a preprocessor of monitoring system to enhance efficiency of proposed system, and the effective UX design for self-management of patients themselves. The 94,467 actual clinic data was used to test the efficiency of the proposed system. As as a result, 64.8% of the incoming vital data was identified to be filtered out.

• Journal of Korea Multimedia Society
• /
• v.15 no.1
• /
• pp.71-80
• /
• 2012

LBS (Location Based Service) services are very useful to our daily life and it should be available inside a building: a huge building, a shopping mall, a large scale underground shopping center, and so on where GPS (Global Positioning System) signal is not available. An LBS which is provided inside a building is called an ILBS (Indoor Location Based Service). One of the most important techniques for ILBS development is indoor positioning. Among the indoor positioning techniques, APs (access points) of WLAN based ones are most economical because WLAN is available almost everywhere. Meanwhile, the web service has been proved to be an excellent practice of software reuse. Therefore, if indoor positioning is provided in the form of web service to programmers then development of ILBS would be greatly accelerated. This paper introduces the AP based trilateration and K-NN indoor positioning and RFID based indoor positioning web services we have developed.