• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.92-100
• /
• 2008

Ad-hoc network is a collection of wireless mobile hosts forming a temporary network without the aid of any centralized administration or reliable support services such as wired network and base stations. Recently, Ad-hoc networks are evolving to support multimedia contents according to expansion of ad hoc multi-hop communication system. Wireless ad-hoc network is different from the conventional wired network by frequent changes in network topology, number of routers and resources, there are a number of problems in applying conventional routing protocol to ad-hoc network. The AODV routing protocol is proposed for mobile node in ad-hoc networks. AODV protocol that provides to guarantee QoS for data transmission in ad hoc networks that link break frequently occurs. In this paper, AODV routing protocol based NDIS(Network Driver Interface Specification) is implemented. We design high performance image transmission that can operate with software(AODV) for ad-hoc networks without degradation. and verify operation of AODV routing protocol on the test bed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.6
• /
• pp.903-909
• /
• 2018

In December 2017, the world's first LTE-R for 250km/h high-speed railway was commercialized with the opening of Wonju-Gangneung high-speed railway. LTE-R has many advantages such as voice and video call, high-speed data transmission, coverage redundancy and DU redundancy. But it requires efficient use of radio resources because of a limited bandwidth of 10MHz for UL and DL, respectively. The existing unicast scheme has limited high frequency efficiency so when the number of users increases, service is limited due to the network load, which could be a problem for LTE-R in terms of stability and reliability. On the other hand, the multicast scheme via eMBMS can provide stable service even if the number of video users is high. This paper derives the number of unicast scheme users considering the LTE-R network with LAB test and calculation result, and proposes implementation plans and considerations for eMBMS commercialization on LTE-R.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.572-588
• /
• 2013

In this paper, 4K-UHDTV or 8K-UHDTV and UHD-3DTV that the next generation broadcasting implementation and the possibility of direct receiving environment construction is analyzed on the terrestrial broadcasting. Particularly, we investigated the possibility by analyzing the previous and related works with regard to UHDTV transmission by DVB-T2 that is one of the best commercialized transmission mode. In order that the UHDTV broadcasting succeeds once again after completion of digital terrestrial switch over at the end of 2012, the ultra high resolution image transfer is important. However, the direct, the indoor and ubiquitous receiving environment is important in not only TV but also the personal type multimedia terminal in the sense of UHDTV service penetration. Therefore, in this paper, by using SFN and high error-correcting mode in DVB-T2 standard, the efficient frequency utilization and effective reception environment construction is illustrated. Particularly, SFN network constitution by 2 mutually different frequencies including the VHF bandwidth and UHF band, and etc. is shown. And the method that builds the free wireless receive environment by using SFN low power radio repeater and for home use gap filler is proposed. And the effect and frequency amount required are presented, when UHDTV broadcasting use 10MHz bandwidth.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.1B
• /
• pp.8-17
• /
• 2004

In this paper: we propose the adaptive error concealment technique for scalable video coding over wireless network error prove environment. We prove it is very effective that Error concealment techniques proposed in this paper are applied to scalable video data. In this paper, we propose two methods of error concealment. First one is that the en·or is concealed using the motion vector of base layer and previous VOP data. Second one is that according to existence of motion vector in error position, the error is concealed using the same position data of base layer when the motion vector is existing otherwise using the same position data of previous VOP when the motion vector is 0(zero) adaptively. We show that according to various error pattern caused by condition of wireless network and characteristics of sequence, we refer decoder to base layer data or previous enhancement layer data to effective error concealment. Using scalable coding of MPEG-4 In this paper, this error concealment techniques are available to be used every codec based on DCT.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.53-60
• /
• 2017

This paper is to design and implement the drone that supports a wideband multimedia communication and a long-range to save people in maritime. The drone is an Unnamed Aerial Vehicle (UAV) that is controlled by a radio wave not by people boarding the machine. We use the drone to respond quickly to the boating accident. To develop a smart drone for the high speed seamless video streaming in a long-range maritime, a necessary techniques are hardware design techniques that design structure of a drone, controlling techniques that operate a drone and communication techniques that control a drone in a long distance. In this paper, the limitations and techniques to design and implement the structure of drone supporting wideband multimedia communication for long-range maritime are explained. By expanding this communication drone network, it is aimed at improving utility of a drone.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.619-622
• /
• 2007

PDA provides an opportunity for users to study anytime and anywhere because it is portable and convenient thanks to its relatively small size. However, users may face difficulties to fully recognize the characters provided through lecture videos, due to its low resolution and small scaled screen. This thesis proposes a system of remote lecture in which the size of videos can be adjusted and transmitted on the basis of contents necessary for study, using detection of region-of-interest(ROI) image, and a method of image scaling in a bid to solve such a problem of PDAs. The experiment on 802.11b wireless network shows that the proposed system is able to provide more optimized lecture videos than in existing method.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.29-37
• /
• 2008

To transmit video bit stream over low bandwidth such as wireless channel, high compression algorithm like H.264 codec is exploited. In transmitting high compressed video bit-stream over low bandwidth, packet loss causes severe degradation in image quality. In this paper, a new algorithm for recovery of missing or erroneous motion vector is proposed. Considering that the missing or erroneous motion vectors in blocks are closely correlated with those of neighboring blocks. Motion vector of neighboring blocks are clustered according to average linkage algorithm clustering and a representative value for each cluster is determined to obtain the candidate motion vector sets. As a result, simulation results show that the proposed method dramatically improves processing time compared to existing H.264/AVC. Also the proposed method is similar to existing H.264/AVC in terms of visual quality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.522-525
• /
• 2006

Recently, mobile devices support multi-functions such as 3D game, wireless internet, moving pictures, DMB, GPS, and PMP. Bigger size of display device is indispensable to support these functions and higher speed of the interface is needed. However, conventional parallel interfaces between processor and display nodule are not competent enough for that high speed transfers. High-speed serial interface is beginning to appear as an alternative for parallel interface. The advantages of the serial interface are high bandwidth, small number of interconnections, low-power consumption, and good quality of electro-magnetic interference. In this paper, we implement serial interface and use it for a display module. LVDS is used for PHY layer and a defined packet is used for link layer. The feature of the implemented serial interface is the reduced number of interconnections with enough bandwidth.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.54-75
• /
• 2011

PoC(Push-to-talk Over Cellular) is an integrated technology of group voice calls, video calls and internet based multimedia services. If a PoC user can not participate in the PoC session for various reasons such as an emergency situation, lack of battery capacity, then the user can use the PoC Box which has a similar functionality to the MM Box in the MMS(Multimedia Messaging Service). The RTSP(Real-Time Streaming Protocol) method is recommended to be used when there is a transmission session between the PoC box and a terminal. Since the existing VOD service uses a wired network, the packet size of RTSP-based VOD service is huge, however, the PoC service has wireless communication environments which have general characteristics to be used in RTSP method. Packet loss in a wired communication environments is relatively less than that in wireless communication environment, therefore, a buffering latency occurs in PoC service due to a play-out delay which means an asynchronous play of audio & video contents. Those problems make a user to be difficult to find the information they want when the media contents are played-out. In this paper, the following techniques and methods were proposed and their performance and superiority were verified through testing: cross-over dual reception buffering technique, advance partition multi-reception buffering technique, and on-demand multi-reception buffering technique, which are designed for effective picking up of information in media content being transmitted in short amount of time using RTSP when a user searches for media, as well as for reduction in playback delay; and same-priority packetization transmission method and priority-based packetization transmission method, which are media data packetization methods for transmission. From the simulation of functional evaluation, we could find that the proposed multiple receiving buffering and packetizing methods are superior, with respect to the media retrieval inclination, to the existing single receiving buffering method by 6-9 points from the viewpoint of effectiveness and excellence. Among them, especially, on-demand multiple receiving buffering technology with same-priority packetization transmission method is able to manage the media search inclination promptly to the requests of users by showing superiority of 3-24 points above compared to other combination methods. In addition, users could find the information they want much quickly since large amount of informations are received in a focused media retrieval period within a short time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1898-1905
• /
• 2012

This paper presents an On-board Smart Device (OSD) for moving vehicle, based on a smooth integration of Android-based devices and a Micro-control Unit (MCU). The MCU is used for the acquisition and transmission of various vehicle-borne data. The OSD has threefold functions: Record, Report and Alarm. Based on these RRA functions, the OSD is basically a safety and convenience oriented smart device, where it facilitates alert services such as accident report and rescue as well as alarm for the status of vehicle. In addition, voice activated interface is developed for the convenience of users. Vehicle data can also be uploaded to a remote server for further access and data manipulation. Therefore, unlike conventional blackboxes, the developed OSD lends itself to a user-friendly smart device for vehicle safety: It basically stores monitoring images in driving plus vehicle data collection. Also, it reports on accident and enables subsequent rescue operation. The developed OSD can thus be considered an essential safety smart device equipped with comprehensive wireless data service, image transfer and voice activated interface.