• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.463-469
• /
• 2015

In this study, to improve bending strength performance of Korean white pine, we made the curved composite glulam that was reinforced with glass fiber materials and larch lamina. Five types of Korean white pine curved glulams were made depending on whether they had been reinforced or not and how they had been reinforced. Type-A, reference specimen, was produced only with Korean white pine lamina, and Type-B was with larch lamina in the same thickness. Type-C was made by inserting a glass fiber cloth of textile shape between the each layer. Type-D was reinforced with two glass fiber cloths, which were placed inside and outside of the outermost lamina. Type-E was reinforced with GFRP sheet in the same way as Type-D. As a result of this bending strength test, the modulus of rupture (MOR) of Type-B, Type-C and Type-E were increased by 29%, 6%, and 48% in comparison with Type-A. However, MOR of Type-D was decreased by 2% in comparison with Type-A. In the failure modes, Type-A, Type-B and Type-C were totally fractured at the maximum load. However, load values of Type-D and Type-E decreased slowly because of reinforcement of fracture suppression, and the GFRP sheet (Type-E) had better reinforcing effect on compressive stress and tensile stress than the glass fiber cloth (Type-D).

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.166-174
• /
• 2007

To know the effect of enzymatic pre-treatment on softwood Kraft pulp, two xylanse-encoding genes, named xynl and xynll were isolated from Thrichoderma ressei. Structural genes of xylanase (XYNI, XYNII) and cellulase (EGIV-CBDII) were isolated from T. ressei and Rumicoccus albus respectively, and expressed in E. coli. bacterial culture. The specific activity of purified recombinant XYNI is higher than XYNII. The brightness of XYNI treated softwood Kraft pulp increased to 29.9%. On further sequential treatment with EGIV-CBDII and XYNI the brightness of softwood Kraft pulp were improved to 9.1 and 73% respectively. As expected the Kappa number of softwood Kraft pulp also decreased 8.1, 4.6 and 3.2% respectively. Results further indicate that this sequential combination of enzyme treatment has synergic effect for improving bleaching of softwood Kraft pulp.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.82-90
• /
• 1999

The buddhistic painting of Song-Kwang temple in Seungjoo-gun, Chonnam, Korea is not known in chronicle, but it could be estimated to works in the early 19th century through it's remaining records and qualities of materials. And it was analysed the qualities of materials consisting of pigment layer, silken-ground layer and support layer in order to preserve buddhistic painting, made back-adherent paper of the support layer proper to it, tested its compatibility, and then concluded as follows. 1. The section structures of buddhistic painting is consisted of the pigment layer, silken-ground layer of silk and the support layer of Korean hand made paper, it could be recognized that buddhistic painting in 19th century was basically composed of the pigment layer, the silken-ground layer and the support layer. Moreover the pigment layer and the silken-ground layer got adhered with glue, and sheets of support layers got back adhered with paste. 2. The support layer of buddhistic painting consisted of 5 layers and two kinds of paper were used for them. The first and second layers were composed of Korean hand made paper made of pure paper mulberry bast fibers, and the rest of them of paper that paper mulberry bast fibers were mixed into recycled hemp fibers. Though it is difficult to assert without the security of more data, finding out the then situation through the qualities of materials, it was presumed that the society in 19th century was suffered from economical difficulties and the operation of the paper industry of temples was rather difficult and so low-qualitative recycled hemp fibers might used for back-adherent paper. 3. Considering tension between silken-ground layers and support layers of this materials, newly made back-adherent paper was used for repair, and then I could conform that it was proper to back-adherent paper for repair.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.67-72
• /
• 2004

Purpose : Patient immobilization is crucial factor for radiation therapy. Generally, we have been used vacuum bag immobilization device(Vac-Lock) for whole body immobilization. In order to easily set up of vacuum bag(Vac-Lock), we made a 3DCA(3-Dimensional Conformal Accessary). The purpose of this study is evaluation of effectiveness of 3DCA using Vack-Lock for patient immobilization. Materials and Methods : We made 3DCA(3-Dimensional Conformal Accessary) tool of wooden boards. The reasons to choice of wooden boards are its easily handling nature and cheap expenses. Results : (1) We reduced man power from $5{\sim}6$persons to 1person to make immobilizations, (2) Shortened work time from 1hour to within 10minutes. (3) Avoid a collision to treatment gantry head. (4) Its shapes are smart and clean. Conclusion : We have made and used 3DCA(3-Dimensional Conformal Accessary) tool was very effective and convenience for the patients and users.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.4
• /
• pp.58-73
• /
• 2014

In general, it is thought discoloration on wood is frequently found in decorative wood products. So this study was conducted focusing on white rot found lower parts of columns and baseboards of a wooden house, Hyunchungsa (shrine) to know whether microorganisms have any influence on discoloration or there is correlation with strength by investigating resistograph, occurrence of microorganisms and microscopy for analysis(SEM, tissue analysis etc.). The results obtained were as follows: (1) The result of measurement of resistograph showed there are little correlation between discoloration and strength though there was a spot indicating low resistance. (2) The moisture content of discolored part was relatively higher than that of normal parts, but occurrence of microorganisms was less in discolored parts while more kinds of microorganisms were identified in normal parts with high CFU(Colony Forming Unit). (3) The result of SEM (with a magnification of 500 times) on the surface of discolored parts, it was found out there are many kinds of particles in different sizes on the surface and those were composed of elements such as C, O, Si, Ca, and a small amount of Na and Cl (weight %) were detected in part. (4) The result of tissue analysis showed discoloration occurs limitedly to the outer surface of column. As these results, it is concluded that discoloration has nothing to do with strength, damage by microorganisms and salt.

• Journal of the Korean Home Economics Association
• /
• v.11 no.4
• /
• pp.424-435
• /
• 1973

This paper attempts to find out the development of designs of chairs in interiors. It will discussed by dividing into two periods; the pre-world war I, and the post-world war I up to date. In the first part it will concentrate on four types of design materjals; plywood, metal, solid wood, and plastic chairs. In the second part it will deal with only two materials; Metal and solid wood. Under each material one designer and manufacturer, the country where the designer worked, and related dates. It will discuss how the design materiai was exploited by each designer within its potentials including how chair was made, what design elements could do, whether he used the potentials, and the potentials were fully exploited. And it discusses the success of the chair design material as shown in the interiors or failure of the chair design material. Fainally under each material one picture of chairs, one or two pictures for the chairs in the interiors, of the chairs will be provided. A bibliography will be attached to the end of the paper.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.10a
• /
• pp.53-53
• /
• 2018

본 연구는 대승 경전에 나타난 식물의 수록 양상과 그 의미를 밝히는 연구의 세 번째 과정이다. 법화경은 천태종(天台宗)의 소의 경전(所依慶典)으로 우리나라에서 유통된 경전 가운데 최다 간행된 경전이며 화엄경과 함께 한국 교학의 중심이 된 경전이다. 연구 대상은 현존하는 법화경의 판본 가운데 구마라집(鳩摩羅什) 역 묘법연화경(妙法蓮華經, 이하 법화경, 7권으로 구성)에 수록된 식물이다. 본 연구에서는 식물 분류학적 실체는 물론 이 경의 중심 논지와 연관성이 큰 천화(天華, 하늘의 꽃)의 실체를 별도로 구명하여 식물수록의 특성과 차별성을 동시에 구명하고자 하였다. 1. 법화경에 나타난 식물의 수록 횟수와 식물의 종 수는 다음과 같았다. 법화경에는 총 27종의 식물이 수록되어 있었으며 이 가운데 목본은 16종(59.3%)이고 초본은 11종(40.7%)이었다. 식물수록 양상에 있어 특이점은 목본이 초본에 비해 상대적으로 높은 비중을 차지하고 있었다는 점이었다. 이러한 결과는 중심사상의 전달방식에 있어 비교 대상이 되는 다른 대승 경전과 차이가 있다는 점과도 무관하지 않았다. 실제로 비교 대상인 화엄경의 목본과 초본 비율은 각각 17종(48.6%)과 18종(51.4%)이었고 열반경은 각각 36종(45.6%)과 43종(54.4%)으로 목본과 초본의 수록 비율에 차이가 크지 않았다. 2. 법화경에 나타난 식물 27종은 총 20개 과에 분포되어 있었다. 수련과 3종, 콩과 3종, 물푸레나무과 2종, 뽕나무과 2종, 벼과 2종의 순이었다. 다수 과에 분포된 식물은 대부분 중심사상 전달의 매개체인 천화(하늘의 꽃)에 속하는 식물이었다. 3. '하늘의 꽃' 이라고 신성시되면서 이 경의 내용 전개에 있어 중요한 위치를 점하고 있는'천화(天華)'는 연꽃과 수련 종류를 지칭하는 식물이 중심이 되었으며 유용한 관상 및 조경, 향료 자원 및 목재 자원 식물이었다.

• Fire Science and Engineering
• /
• v.26 no.2
• /
• pp.53-58
• /
• 2012

In this study fire control characteristics for inflammable materials of water curtain system are experimentally analyzed. Heat release rate for pinewood and gasoline was calculated using Room Corner Tester (RCT) and fire test apparatus for water curtain system is manufactured. Nozzles (180 degree of injection angle, 8.2 mm of orifice diameter) are installed at the nearby ceiling of place at 5 m distance from fire originate and temperature profile as well as transmission are obtained from the fire experiment of pinewood and gasoline in the water curtain system. Based on the results, parameters of engineering importance for fire control characteristics of water curtain system such as generation of high temperature smoke and thermal phenomena of fluid flow by injection nozzle are identified.

• Nuclear Engineering and Technology
• /
• v.4 no.4
• /
• pp.301-305
• /
• 1972

The polymerization rates of monomer or monomer mixture impregnated with catalyst into domestic soft woods such as pinus densiflora, pinus rigida and poplus deltoides e. t. c. were measured. The results were compared with those obtained by radiation curing method and the following conclusions were derived ; (1) Pinus densiflora and pinus rigida are superior to the poplus deltoides, and methyl methacrylate(M. M. A. ) is more effective than other monomers as far as the polymerization rates are only taken into account. (2) The polymerization rate of vinyl acetate is generally slow. And the polymerization rate of the monomer is the slowest in case of being impregnated into poplus deltoides. However, the polymerization rate of the comonomer composed of vinylacetate and M. M. A. is the fastest among the other monomers or monomer mixtures in woods regardless of the curing method. (3) The general trend of polymerization of monomer in wood is similar to that of monomers themselves in both curing methods if the woods contain not much resin.

• The Korean Journal of Mycology
• /
• v.19 no.1
• /
• pp.1-10
• /
• 1991

Fresh materials were obtained during collection trips to $Ull\check{u}ng$ Island in October, 1989, and August, 1990. Among them, some resupinate fungi were identified. Seven fungi were confirmed new in Korea and are recorded here with descriptions. They are Gloeocystidiellum karstenii, Peniophora lilacea, Phlebia cremeo-alutacea, P. deflectens, P. livida, Resinicium bicolor, and Hymeno­chaete corrugata.