• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.3
• /
• pp.249-255
• /
• 2017

The finger vein recognition technology is a method to acquire a finger vein image by illuminating infrared light to the finger and to authenticate a person through processes such as feature extraction and matching. In order to recognize a finger vein, a 2D mask-based two-dimensional convolution method can be used to detect a finger edge but it takes too much computation time when it is applied to a low cost micro-processor or micro-controller. To solve this problem and improve the recognition rate, this study proposed an extraction method for the region of interest based on virtual core points and moving average filtering based on the threshold and absolute value of difference between pixels without using 2D convolution and 2D masks. To evaluate the performance of the proposed method, 600 finger vein images were used to compare the edge extraction speed and accuracy of ROI extraction between the proposed method and existing methods. The comparison result showed that a processing speed of the proposed method was at least twice faster than those of the existing methods and the accuracy of ROI extraction was 6% higher than those of the existing methods. From the results, the proposed method is expected to have high processing speed and high recognition rate when it is applied to inexpensive microprocessors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.376-381
• /
• 2009

The image data compression, recognition, restoration, etc. are parts of the digital image processing technology. In the process by various devices, noises would be made. Because the noise could damage the image, we use the image filter to preserve the original image from the noise. The image filter used in digital image process basically has a two-dimensional structure. There an two methods of creating the filter - One is reiterating one dimension and the other is using an indivisible two-dimension image filter. The image filter is being widely used along with one-dimension filter according to each noise, and various median filters are being used to remove the impulse noise. In this paper, I suggested a powerful modified median filter, and compared with conventional filters for objective verification.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.765-767
• /
• 2013

Modern societies need image processing technology as mobile phones, computers and multimedia etc. are supplied, and image signal processing is now applied in many fields. However, images are damaged by impulse noise from various sources; to restore the damaged images from impulse noise standard median filter has been used as a typical method, but it makes errors at edge area lowering image quality. Therefore, in this paper average filter algorithm, in which mask is processed with multiple partition to remove impulse noise, is proposed. Simulation showed that the proposed method is superior in noise removal property to the existing ones.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.346-349
• /
• 2017

Digital image processing is widely used in a variety of areas, and noise elimination is used as the preprocessing in all the image processing processes. Degradation is occurred in the image data due to multiple reasons. Degradation is to add the noise in the image signal, and salt and pepper noise is the representative one to cause degradation. Therefore, image restoration algorithm was proposed to process with histogram weight filter and median filter by the noise density of local mask to restore the damaged image in the salt and pepper noise environment, in this article. In addition, it was compared with the existing methods using peak signal to noise ratio(PSNR) as the objective determination factor of improvement effect.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.793-796
• /
• 2017

Image signal can be damaged by a variety of noises during the signal processing, and multiple studies have been conducted to restore these signals. The representative noises to be added in the image are salt and pepper noise, additive white Gaussian noise(AWGN), and the composite noise which two noises are combined. Therefore, the algorithms were proposed to process with quadratic spline interpolation and median filter in case of salt and pepper noise with the central pixel of the local mask, and to process with weight filter by pixel changes in case of AWGN, upon noise determination to restore the damaged image in the composite noise environment, in this article.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.2
• /
• pp.119-125
• /
• 2004

The direction component uses mainly the sobel and FFT method. The sobel method is difficult to set representative direction when we wish to extract representative direction when we wish to extract representative direction component and the complicated processing process of sobel mask because same value appears in the low provision image or high provision image and we cannot accumulate tilt size in case of making accumulate after making unit vector to pixel. The method that uses FFT conversion for direction extraction is possible in case that ridge has correct direction specification and must use a special direction filter. After thinning the binary image to supplement above weak point in the paper, we extract direction component by pixel unit, and we extract the most direction components of pixel that exist in block of 8${\times}$8 pixels size as representative direction of ridge.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.3
• /
• pp.76-79
• /
• 2014

Face recognition is very challenging because of the unexpected changes of pose, expression, and illumination. Facial detection in the mobile environments has additional difficulty since the computational resources are very limited. This paper discusses face detection based on frequency domain matched filtering in the mobile environments. Face detection is performed by a linear or phase-only matched filter and sequential verification stages. The candidate window regions are selected by a number of peaks of the matched filtering outputs. The sequential stages comprise a skin-color test and an edge mask filtering tests, which aim to remove false alarms among selected candidate windows. The algorithms are built with JAVA language on the mobile device operated by the Android platform. The simulation and experimental results show that real-time face detection can be performed successfully in the mobile environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.956-958
• /
• 2016

Currently, image processing has been widely utilized and the noise may be occurred in the processes of image data transmission, processing, and storage. The studies have been actively conducted to eliminate the added noise in the image. The types of noise in the image are various depending on the causes and the forms, and additive white Gaussian noise(AWGN) is the representative one. The algorithm to apply and process the weighted value was suggested by the directions of the pixel in the local mask using edge detection to relieve the added AWGN in the image in this article.

• Annual Conference of KIPS
• /
• 2020.11a
• /
• pp.1052-1055
• /
• 2020

본 논문에서는 3D 메시 정보, RGB-D 손 자세 및 2D/3D 손/세그먼트 마스크를 포함하여 인간의 손과 관련된 다양한 컴퓨터 비전 작업에 사용할 수 있는 새로운 다중 모달 합성 벤치마크를 제안 하였다. 생성된 데이터셋은 기존의 대규모 데이터셋인 BigHand2.2M 데이터셋과 변형 가능한 3D 손 메시(mesh) MANO 모델을 활용하여 다양한 손 포즈 변형을 다룬다. 첫째, 중복되는 손자세를 줄이기 위해 전략적으로 샘플링하는 방법을 이용하고 3D 메시 모델을 샘플링된 손에 피팅한다. 3D 메시의 모양 및 시점 파라미터를 탐색하여 인간 손 이미지의 자연스러운 가변성을 처리한다. 마지막으로, 다중 모달리티 데이터를 생성한다. 손 관절, 모양 및 관점의 데이터 공간을 기존 벤치마크의 데이터 공간과 비교한다. 이 과정을 통해 제안된 벤치마크가 이전 작업의 차이를 메우고 있음을 보여주고, 또한 네트워크 훈련 과정에서 제안된 데이터를 사용하여 RGB 기반 손 포즈 추정 실험을 하여 생성된 데이터가 양질의 질과 양을 가짐을 보여준다. 제안된 데이터가 RGB 기반 3D 손 포즈 추정 및 시맨틱 손 세그멘테이션과 같은 품질 좋은 큰 데이터셋이 부족하여 방해되었던 작업에 대한 발전을 가속화할 것으로 기대된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.207-209
• /
• 2021

In recent years, with the development of artificial intelligence and IoT technology, automation and unmanned technology are in progress in various fields, and the importance of image processing such as object tracking, medical images and object recognition, which are the basis of this, is increasing. In particular, in systems requiring detailed data processing, noise reduction is used as a pre-processing step, but the existing algorithm has a disadvantage that blurring occurs in the filtering process. Therefore, in this paper, we propose a filter algorithm using modified spatial weights to minimize information loss in the filtering process. The proposed algorithm uses mask matching to remove AWGN, and obtains the output of the filter by adding or subtracting the output of the modified spatial weight. The proposed algorithm has superior noise reduction characteristics compared to the existing method and reconstructs the image while minimizing the blurring phenomenon.