• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.9B
• /
• pp.760-773
• /
• 2003

The Internet is evolving from best-effort service toward an integrated or differentiated service framework with quality-of-service (QoS) assurances that are required for new multimedia service applications. Given this increasing demand for high bandwidth Internet with QoS assurances in the coming years, an IP/MPLS-based control plane combined. with a wavelength-routed dense-wavelength division multiplexing (DWDM) optical network is seen as a very promising approach for the realization of future re-configurable transport networks. This paper proposes a differentiated lambda establishment process for QoS guarantees based on the differentiated MPLS service (DMS) model. According to the QoS characteristics of wavelength in optical links and the type of used Optical Cross-Connect (OXC) nodes in DWDM next generation optical Internet backbone network, a differentiated wavelength assignment strategy that considers QoS recovery capability is also suggested.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.189-197
• /
• 2016

Mobile ad-hoc networks (MANETs) experience frequent link disconnections due to non-uniform node distribution and mobility. Thus, end-to-end path establishment-based routing protocols cause frequent transmission failures in MANETs, resulting in heavy control messages for path reestablishment. While location-based MANET routing protocols, such as Greedy Perimeter Stateless Routing (GPSR), use location information to forward messages in a hop-by-hop routing fashion without an end-to-end path establishment procedure, such protocols encounter communication void problems when message forwarding to the next hop fails due to the absence of a relay node. Therefore, to solve this problem, this paper proposes a Delay Tolerant-GPSR (DT-GPSR) protocol, which combines Delay Tolerant Networking (DTN) technology with the GPSR protocol. The performance of DT-GPSR is compared with the performances of the original GPSR and PRoPHET routing protocols through simulation using NS-2. The simulation results confirm that DT-GPSR outperforms GPSR and PRoPHET in terms of the message delivery ratio and message delivery delay.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.6
• /
• pp.691-697
• /
• 2006

Induction motors are critical components in industrial process. So there are many research in the condition based maintenance, online monitoring system, and fault detection. This paper presents a scheme on the detection and diagnosis of the three-phase squirrel induction motor under unbalanced voltage, broken rotor bar, and a combination of these two faults. Actually one fault happen in operation, it influence other component in motor or cause another faults. Accordingly it is useful to diagnose and detect a combination fault in induction motor as well as each fault. The proposed fault detection and diagnosis algorithm is based on the stator currents from the squirrel induction motor and simulated with the aid of Matlab Simulink.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.1-12
• /
• 2022

As the performance of Unmanned Aerial Vehicles (UAVs) are improving and the prices are lowering, it is expected that the use of UAVs will continuously grow in the future. It is important to always maintain control signal and video communication to operate remote UAVs stably, especially in military UAV operations, as unexpected jamming attacks can result in fatal UAV crashes. In this paper, to improve the network reliability and low latency when supporting UAV operations, the anti-jamming performance of Second generation Anti-jam Tactical UHF Radio for NATO (SATURN) networks is analyzed and enhanced by applying Forward Error Correction (FEC) and Minimum Shift Keying (MSK) modulation as well as Hamming code based multiple transmission techniques.

• Journal of KIISE:Software and Applications
• /
• v.31 no.8
• /
• pp.1092-1100
• /
• 2004

An E-mails have regarded as one of the most popular methods for exchanging information because of easy usage and low cost. Meanwhile, exponentially growing unwanted mails in user's mailbox have been raised as main problem. Recognizing this issue, Korean government established a law in order to prevent e-mail abuse. In this paper we suggest hybrid spam mail filtering system using weighted Bayesian classifier which is extended from naive Bayesian classifier by adding the concept of preprocessing and intelligent agents. This system can classify spam mails automatically by using training data without manual definition of message rules. Particularly, we improved filtering efficiency by imposing weight on some character by feature extraction from spam mails. Finally, we show efficiency comparison among four cases - naive Bayesian, weighting on e-mail header, weighting on HTML tags, weighting on hyperlinks and combining all of four cases. As compared with naive Bayesian classifier, the proposed system obtained 5.7% decreased precision, while the recall and F-measure of this system increased by 33.3% and 31.2%, respectively.

• Journal of the Korean Society for information Management
• /
• v.33 no.1
• /
• pp.33-52
• /
• 2016

This study was to find the display considerations of RDA resource type - content type, media type, and carrier type. The Literature review, the case study, and the survey were used as the research method. 5 display strategies were suggested in this study. First, content and carrier types were better displayed than all 3 types of RDA resources. Second, two kinds of algorithm should be considered for RDA resource icon display. One was the combination of the terms of carrier types plus content types icon. The other was the combination of carrier types icon and content types icon in which the terms reflecting types must be included. Third, the subfield of 33x must be used for the paired display of content type and carrier type of multi-types resources. Fourth, in brief display, resource type icon was better positioned on the left and upper side and in detailed display, resource types were better located in description area. Fifth, 'format' was used as display indication phrase. This study would contribute to the design for the resource display by suggesting the practical display considerations of RDA resource type.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.914-923
• /
• 2009

Helix antennas have been widely applied to satellite TT&C, data communication and GPS receiver systems onboard military, remote sensing and communication purpose satellites. The helix antennas are known to be convenient to control impedance and radiation coverage characteristics with a maximum directivity in satellite z-axis. Waveguide horn is commonly used for radar system that needs ultra-wideband pulse for exploration ground radar and electromagnetic disability measurement etc. It has high efficiency and low reflection characteristics provided by the low-profile shape and suppressed radiation distortion. In this paper, a waveguide horn structure incorporated with helix antenna design is proposed for satellite applications that require ultra-wideband pulse radar and high rate RF data communication link to ground station over wide coverage area. The main design concern is to synthesize variable beam forming pattern based on modified horn-helix combination helicone structure such that multi-mission antenna is implemented applicable for TT&C, earth observation, high data rate transmission. Waveguide horn helps to reduce the overall antenna structure size by introduction fold type reflector connected to the tapered helix antenna. The next generation KOMPSAT satellite currently under development requires high-performance precision attitude control system. We present an initial design of a hybrid hern-helix antenna structure suitable for efficient RF communication module design of multi-purpose satellite systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.880-886
• /
• 2007

We have proposed a new "hybrid" envelope elimination and restoration(EER) transmitter architecture using an efficiency optimized power amplifier(PA) and modified bias modulator. The efficiency of the PA at the average drain voltage is very important for the overall transmitter efficiency because the PA operates mostly at the average power region of the modulation signal. Accordingly, the efficiency of the PA has been optimized at the region. Besides, the bias modulator has been accompanied with the emitter follower for the minimization of memory effect. A saturation amplifier, class $F^{-1}$ is built using a 5-W PEP LDMOSFET for forward-link single-carrier wideband code-division multiple-access(WCDMA) at 1-GHz. For the interlock experiment, the bias modulator has been built with the efficiency of 64.16% and peak output voltage of 31.8 V. The transmitter with the proposed PA and bias modulator has been achieved an efficiency of 44.19%, an improvement of 8.11%. Besides, the output power is enhanced to 32.33 dBm due to the class F operation and the PAE is 38.28% with ACLRs of -35.9 dBc at 5-MHz offset. These results show that the proposed architecture is a very good candidate for the linear and efficient high power transmitter.

• Journal of Korean Society of Transportation
• /
• v.22 no.5
• /
• pp.139-149
• /
• 2004

As the expansion of road capacity has become impractical in many urban areas, congestion pricing has been widely considered as an effective method to reduce urban traffic congestion in recent years. The principal reason is that the congestion pricing may lead the user equilibrium (UE) flow pattern to system optimum (SO) pattern in road network. In the context of network equilibrium, the link tolls according to the marginal cost pricing principle can user an UE flow to a SO pattern. Thus, the pricing method offers an efficient tool for moving toward system optimal traffic conditions on the network. This paper proposes a continuous network design program (CNDP) in network equilibrium condition, in order to find optimal congestion toll for maximizing net economic benefit (NEB). The model could be formulated as a bi-level program with continuous variable(congestion toll) such that the upper level problem is for maximizing the NEB in elastic demand, while the lower level is for describing route choice of road users. The bi-level CNDP is intrinsically nonlinear, non-convex, and hence it might be difficult to solve. So, we suggest a heuristic solution algorithm, which adopt derivative information of link flow with respect to design parameter, or congestion toll. Two example networks are used for test of the model proposed in the paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.10
• /
• pp.89-100
• /
• 2007

Consumer Portal is defined as "a combination of hardware and software that enables two-way communication between energy service provider(ESP, like KEPCO) and equipment within the consumer's premises". The portal provides both a physical link(between wires, radio waves, and other media) and a logical link(translating among language-like codes and etiquette-like protocols) between in-building and wide-area access networks. Thus, the consumer portal is an important, open public shared infrastructure in the future vision of energy services. In this paper, we describe a new methodology for local communication and computer network capacity design of consumer portal, and also presents capacity calculation method using a network system limitation factors. By the approach, we can check into the limitations of existing methods, and propose an improved data processing algorithm that can expand the maximum number of the networked end-use devices up to $30{\sim}40$ times. For validation, we applies the proposed methode to our real system design. Our contribution will help electrical power information network design.