• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.6
• /
• pp.117-123
• /
• 2014

This paper proposes the constructing method of effective multiplier using basis transformation. Th proposed multiplier is composed of the standard-dual basis transformation circuit module to change one input into dual basis the operation module to generate from bm to bm+k by the m degree irreducible polynomial, and the polynomial multiplicative module to consist of $m^2$ AND and m(m-1) EX-OR gates. Also, the dual-standard basis transformation circuit module to change the output part to be shown as a dual basis into standard basis is composed. The operation modules to need in each operational part are defined.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.10
• /
• pp.23-29
• /
• 2004

In this paper, the asynchronous quasi dual-port SRAM employing a single port structure in SRAM embedded SOC (System On Chip) is proposed. External host can access the internal SRAM freely and the data on internal SRAM can be transferred to an another external circuitry without a synchronous signal of an external host, which operates as an asynchronous dual-port SRRAH The performances of the proposed circuits and control structure are verified through the simulation and we fabricated it using a 0.35um CMOS technology. As the results, the chip shows reduced area about 20% and saved power also 20% than conventional architectures.

• Journal of Navigation and Port Research
• /
• v.33 no.5
• /
• pp.331-337
• /
• 2009

Container crane is main equipment in container terminals and it determines the productivity and the efficiency of container terminals. The typical type of container cranes has the single trolley and one among advanced types of them has the dual trolley. The objective of this paper is to analyze the buffer size of a container crane with the dual trolley in container terminals. We present a simulation model for analysing the buffer space of a container crane with the dual trolley. The buffer space is located between main trolley in sea-side and second trolley in yard-side. We performs various simulation experiments and analyze the buffer size to estimate the required productivity.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.196-198
• /
• 2007

1MW급 듀얼로터(Dual rotor) 풍력발전 시스템을 충남 서천군 서면 마량리 서천화력발전소 회사장 부지에 지난 2007년 5월 설치를 완료하였다. 듀얼로터 풍력발전 시스템은 기존의 싱글(Single) 로터 시스템과 달리 바람의 이용율의 극대화를 위해 2개의 로터 시스템으로 구성되어 있으며, 실시간으로 변하는 바람의 방향에 로터의 방향이 향하도록 프리요(Free yaw)를 실현하였다. 본 연구에서는 1MW급 듀얼로터 풍력발전 시스템의 특징과 구성에 관한 전반적인 사항에 대해 소개하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.6A
• /
• pp.1067-1077
• /
• 2001

본 논문에서는 결함의 영향을 받지 않고 동작할 수 있는 AVTMR(All Voting Triple Modular Redundancy) 시스템과 듀얼 듀플렉스(Dual-duplex) 시스템을 설계하고, 각 시스템의 평가를 통하여 RAMS(Reliability, Avaliability, Maintainability, Safety)를 비교하였다. ABTMR 시스템은 3중화된 보터(voter)를 사용하여 설계를 하였으며, 듀얼 듀플렉스 시스템은 비교기(comparator)를 이용하여 시스템을 설계하였다. 각 시스템은 버스 레벨로 데이터를 비교하도록 설계하였으며, 시스템 평가를 위해서 소자의 고장율은 MILSPEC-217F에 기반을 두고 RELEX6.0을 이용하였고, 마코브 모델(Markov model)을 이용하여 시스템의 RAMS를 평가하였다. 본 논문에서는 각 시스템을 MC68000을 기반으로 설계하여, 각각 시스템에 사용되는 비용 및 시스템이 어느 부분에서 선호될 수 있는가를 RAMS 및 MTTF(Mean Time To Failure)를 통하여 선택할 수 있는 기반을 제시하도록 나타내고 있다. 이러한 AVTMR이나 듀얼 듀플렉스 시스템(dual-duplex system)은 결함 허용 시스템(fault tolerant system)으로 인간의 생명과 직접적인 관련이 있는 고속철도 시스템이나 항공기 시스템에 적용될 수 있다.

• Journal of Navigation and Port Research
• /
• v.36 no.1
• /
• pp.69-74
• /
• 2012

Recent global supply chain, improving the efficiency of container shipping process is very important. In the overseas shipping of goods, the voyage of super containership is common to overcome amount of increasing cargo. Thus, container terminal managers make an experiment on the double cycle and dual cycle operation, which ship loading and unloading were carried out simultaneously, for maximizing the productivity of quay side. Yard Tractors(YTs) pooling methods also are introduced for increasing the efficiency of assignment of YTs. In this paper, we analyzed the efficiency of dual cycling through comparing existing pooling methods with the modified method for the dual cycling. We developed a simulation model using simulation analysis software, Arena. The result of experiment shown that the more dual cycling don't always increase the gross crane rate(GCR), which means productivity of quay cranes(QCs) per hour.

• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.5
• /
• pp.542-546
• /
• 2008

Recently dual-port SDRAM (DPSDRAM) architecture tailored for dual-processor based mobile embedded systems has been announced where a single memory chip plays the role of the local memories and the shared memory for both processors. In order to maintain memory consistency from simultaneous accesses of both ports, every access to the shared memory should be protected by a synchronization mechanism, which can result in substantial access latency. We propose two optimization techniques by exploiting the communication patterns of target applications: lock-priority scheme and static-copy scheme. Further, by dividing the shared bank into multiple blocks, we allow simultaneous accesses to different blocks thus achieve considerable performance gain. Experiments on a virtual prototyping system show a promising result - we could achieve about 20-50% performance gain compared to the base DPSDRAM architecture.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.11
• /
• pp.795-802
• /
• 2019

This paper deals with position-attitude coupling motion during spacecraft relative operation, and suggests dual quaternion-based kinematics for the problem. The position-attitude coupling motion can occur when the target point is located at an arbitrary point on the satellite body, not the center of mass. This is especially apparent in close proximity operation case. The dual quaternion-based kinematics directly reflects the angular velocity state, so that the coupling motion in which the change of attitude affects the position can be concisely defined. In this study, a new dual quaternion-based kinematics is presented along with a conventional approach to solve the coupling problem. Numerical simulations show that the position error for the target point is generated by the coupling motion, and verify that the dual quaternion-based kinematics can solve this problem.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.91-100
• /
• 2018

The new seismic retrofit system in study propose is the Dual system, which aims to be applied to the seismically vulnerable low-story buildings. The Dual system is composed of existing structure, external retrofit frame and hysteretic steel dampers installed between former two components. The Dual system dissipates the energy by plastic deformation of steel damper caused by relative displacement due to the differences in stiffness, weight, and eigenperiod of each components. The dynamic test with shaking table was performed to verify the seismic performance of the proposed Dual system. As a result of the dynamic test, it is expected that the Dual system will improve the seismic performance due to the reduction of strain of 56% and the damage reduction of 93%, even though the energy is 1.84 times higher than that of the dual system. And the results of the study are presented as basic data of the study for setting the design range of the dual system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.18-28
• /
• 2016

Numerical analysis was conducted as a preliminary study for evaluating the dual bell nozzle. For future parametric studies, a dual bell nozzle was designed, and thereafter inlet condition, turbulence model, and the number of optimum grids were determined. Dual bell nozzle was designed based on the KSLV-II first stage nozzle. Inlet condition was determined to frozen flow model of non-reacting eight species by comparing with the design values. SST $k-{\omega}$ model turned out to be suitable as turbulence model. About 150 thousand of the grids were selected after grid sensitivity tests. Based on the results determined in this study, we plan to investigate performance gain of the KSLV-II by adopting a proposed dual bell nozzle.