• Journal of Korean Society of Steel Construction
• /
• v.17 no.1 s.74
• /
• pp.63-71
• /
• 2005

There were already several studies conducted on the steel-concrete (SC) composite column, which was developedcomplement the weaknesses and maintain the advantages of previous composite columns. The axial compressive capacity of the SC composite column was estimated by the tests in previous studies, but the experiments for the large-scale column could not be performed because of the limitation with the laboratory's capacity. In this study, the analytical study was performed using the general finite element analysis program to reflect the interaction of concrete and steel and the local buckling of steel flange composed of the non-compact section. The appropriateness of the analytical model was verified by the comparison between experimental and analytical results. The nonlinear behavior of full-scale SC composite column was analyzed using the verified analytical model. From these analytical studies, it was concluded that the width-to-thickness ratio of the steel cross-section of the SC composite column should not exceed 25:0. The section area of the link is best when it is over 0.025 dt, and the link distance is to be less than D/2 or 300mm.

• Geophysics and Geophysical Exploration
• /
• v.7 no.2
• /
• pp.148-154
• /
• 2004

This article reviews the development of three-dimensional (3-D) magnetotelluric (MT) modeling. The 3-D modeling of electromagnetic fields is essential in understanding the physics of MT soundings, and in implementing an inversion method to reconstruct a 3-D resistivity image. Although various numerical schemes have been developed over the last two decades, practical methods have been quite limited. However, the recent rapid improvement in computer speed and memory, as well as the advance in iterative solution algorithms for a large system of equations, makes it possible to model the MT responses of complex 3-D structures, which have been very difficult to simulate before. The use of staggered grids in finite difference method has become popular, conserving a magnetic flux and an electric current and allowing for realistic discontinuous fields. The convergence of numerical solutions has been greatly accelerated by adopting Krylov subspace methods, proper preconditioning techniques, and static divergence corrections. The vector finite-element method using edge elements is also free from the discontinuity problem, and seems a natural choice for modeling complex structures including irregular topography because its flexibility allows one to capture full geometric complexity.

• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.159-178
• /
• 2012

Recently, Global network expansion strategy of GTOs(Global Terminal Operator) coupled with each country's port policy, plays huge role for the evolution of modern container port. The Chinese ports can be regarded as the major markets to the GTOs. However, there are scant of researches for finding the key success factors of GTOs' strategies when they consider to invest in overseas. In this respect, the aims of this study were to draw out the evaluation variables for successful investment strategies of GTOs, and to calculate the selected target ports. The 14 variables are selected including the variable named 'development potentiality of a port' through literature reviews. Using the Factor Analysis (FA) based on selected variables, four principal factors were extracted such as 'ability for port operating and cargo generating', 'the trade route and volume', 'the calling potentiality for large vessels' and 'the possibility of utilization of existing infrastructure'. In addition, the weights of factors and variables are evaluated through Fuzzy AHP method. As a result, 'ability for port operating and cargo generating' is chosen as the most important factor among principal factors as scored 0.343, and 'the development potentiality of a port' (0.107) is represented as the most important variable among 14 detailed variables. In overall, from the Global Terminal Operator's point of view, Shanghai is ranked as most suitable port for operating new terminal among the top 5 Chinese ports.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.345-348
• /
• 2003

The overall ability to manage the construction projects from an integrated perspective is important due to the emerging of high-rise building constructions. Potential hazardous of low productivity exist in the finishing work of high rise building a distinct example of the projects. Especially, the number of activities that should be controlled during finishing work is more than during skeleton work. Thus field managers should attract more attention to manage finish work activities. The low productivity of these activities can diminish that of skeleton work. Decision factors of the delivery system for finishing works in the high-rise building project is established by means of literature review and questionnaire survey and a basis to analyze the effects of the criteria to the deli very system is presented.

• Economic and Environmental Geology
• /
• v.41 no.5
• /
• pp.517-526
• /
• 2008

Geological and related thematic maps make various economical and social benefits at many sectors. Recently, development of information managing technology such as GIS, Geographic Information System, enlarges the usage of geological map and information. In this research, using the Analytic Hierarchy Process, we analyzed the weight of attributes which compose value of geological map and information. Results of research are as follows. By the analysis of the weight of attributes, we found that the weight of confidence, upper hierarchy attribute, was above 50%. The weight of convenience and additional effect was about $16%{\sim}30%$ in the geological map, geophysical map, geochemical map and hydrogeologic map. And the consumption of each maps will increase, especially in large scale map.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.7 no.1
• /
• pp.91-97
• /
• 2005

Class A evaporation pan has been used throughout the world to measure free water evaporation mainly by manual observation once a day. In this study, a new automatic water level measurement method is used for understanding of free water evaporation and numerical analysis. This new technique measures the weight of buoyancy bar in water, and does not need calibration because it is not affected by water density change with water temperature. Field observations of evaporation were made near Haenam Meteorological Station over paddy field located in southwestern Korea from 20 April to 30 May 2004 and the data from ten clear days (16 - 25 May) were used for this analysis. The observed total evaporation was about 50.7mm during this period whereas the estimated from an empirical equation was 50.4mm. As expected, the pan evaporation is well correlated with wind speed and the vapor pressure deficit between the water surface and the air.

• The KIPS Transactions:PartD
• /
• v.11D no.4
• /
• pp.865-872
• /
• 2004

Web applications have different structural characteristics from conventional applications with the structural language or object-oriented language or 4GL. A web application typically consists of server-side script elements which run on web sewers, client-side script elements which run on the client web-browser, HTML elements that contains context. Therefore web applications developer concurrently uses 3 or more development language. Cyclomatic Complexity for Web Application(CCWA) metrics reflected composite complexity of each element. In this paper, we applied cyclomatic complexity for web application metrics with Complexity level indicator to web application. We applied it to 10 web applications that were developed in practical business. High complexity web applications classify into four type(MENU, FORM, CTRL, GEN). This paper has contributed to practical use of engineering approach for web application.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1995.04a
• /
• pp.344-349
• /
• 1995

셀구조물은 선박, 항공기, 우주선 등의 산업분야에 자주 사용되는 중요한 구조요소로서, 이에 대한 연구도 공학적 필요성에 의해 많은 연구가 진행되어 왔다. Maddox등의 Rayleigh-Ritz법, Srinivasan and Bobby의 적분방정식 기법, Petyt의 유한요소법, Irie, Henderson등의 전달매트릭스법, 그 외 Webster, Petyt and Deb Nath, Blevins, Srinivasan and Krishnan등에 의해 여러가지 해석방법의 진동해석이 행해져 왔다. 현재 주로 사용되고 있는 매트릭스 구조해석 및 진동해석 방법으로는 유한요소법과 전달매트릭스법을 들 수 있다. 유한요소법은 범용적인 해석 프로그램의 개발은 수월하지만 대규모의 선형 연립방정식의 해법에 귀착되므로, 기억용량이 큰 대형컴퓨터가 필요하고, 반면 전달매트릭스법은 기억용량이 적은 퍼스널컴퓨터로도 계산수행이 가능하나 고차의 고유진동수를 구할 경우나, 중간에 단단한 경탄성지지가 존재할 경우 등에는 수치계산상의 문제점이 지적되고 있다. 이에 대한 대책으로, 상태변수를 바꾸어 넣은 Riccati방법, 각 절점의 기지의 상태변수를 제거하는 Frontal법, 전달매트릭스와 강성매트릭스를 결합시키는 방법 등이 보고 되고 있다. 이에 자자들은 퍼스널컴퓨터 이용에 적합한 고속, 고정도의 구조해석 및 진동해석 기법으로 전달영향계수법을 제안하여, 원판구조물, 사각판구조물, 원통형 셀구조물 등의 여러가지 형상구조물의 자유진동 해석에 적용해서, 종래의 전달매트릭스법에 비해 계산정도 및 계산속도의 양면에서 매우 우수함을 보고한바 있다. 본 연구에서는 동적영향계수의 축차전달에 그 개념을 두고 있는 전달영향계수법을 좀 더 일반화시키고 체계화시키기 위하여 탄성지지를 갖는 셀구조물에 적용하여 자유진동 해석 알고리즘을 정식화한 후, 간단한 모델에 대한 수치실험을 통해서 전달 영향계수법으로 구한 해를 전달매트릭스법의 결과와 비교.검토하여 본 방법의 유용성을 확인하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.1
• /
• pp.49-57
• /
• 2006

In order to strengthen the competitiveness of port against calling for the huge vessel and reducing the shipping service time, the productivity of container terminal must be improved. This productivity variously results according to the kinds of productivity evaluation model, input elements like yard, equipment, employee, facility, etc,. But, it is discussed that the productivity is measured by partial productivity evaluation model or general input elements. Therefore, we measured for the productivity of the container terminal using the Developed the data Envelopment Analysis (DEA), which is developed in order to evaluate the relative efficiency of decision making units - it's difficult to clear cause and effect between input and output. We measured the whole productivity of container terminal in Busan according to decision of the correct input elements. And we investigated the change of the productivity measurement result according to input elements, presents more accurate productivity evaluation model in container terminal.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.4
• /
• pp.421-428
• /
• 2015

This study was carried out to investigate the relationship between anatomical characteristics and growth rate of Quercus rubra from different origins of seed. Anatomical characteristics showed that all Quercus rubra species were ring-porous woods with 1~3 layers of large pores in earlywood, but the latewood had small pores oriented in radial direction. There were slight differences in libriform fiber length and vessel element diameter in the earlywood among different provenance origins of seeds. In growth rate, the libriform fiber length and vessel element diameter was negative correlation in the earlywood, but not correlative in the latewood, and vessel element length was not correlative in the early and latewood, Volumetric composition of libriform fiber and ray in latewood was higher than those in ear lywood, and a higher composition of vessel element was observed in earlywood. Ray height was the range of from 11 to 15 cells.