• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.46-54
• /
• 2018

In the 21st century, the Earth has continued its efforts to reduce carbon emissions to overcome the crisis caused by climate change. The construction industry, which is a representative industry that produces large amounts of the environmental load during construction, should actively reduce the amount of the environmental load. From the planning stage of the construction facility, it is necessary to consider the environmental load such as route selection and structure type selection to reduce the environmental load. However, the environmental load can be estimated based on the input resource amount. However, in the planning stage, it is difficult to accurately calculate the environmental load due to lack of information on the construction amount. The purpose of this study is to select the environmental load factors for IPC girder bridges to be used in the environmental load estimation model in the planning stage. Specific information related to the environmental load was selected from a list of information available in the planning stage, reflecting the Life Cycle Assessment(LCA), correlation, principal components analysis and expert opinion. The list of selected planning stage information is 10 such as span length and bridge extension, and it is expected to be used as a basic data for the future development of environmental load estimation model.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.1-12
• /
• 2017

The Seoul metropolitan transportation card's high value lies in its recording of total population movements of the public transit system. In case of recorded information on transit by bus, even though route information utilized by each passenger is accurate, the lack of passenger transfer information of the urban railway makes it difficult to estimate correct routes taken by each passenger. Therefore, pinpointing passenger path selection patterns arising in the metropolitan railway network and using this as part of a path movement estimation model is essential. This research seeks to determine that features of passenger movement routes in the urban railway system is comprised of M-similar routes with increasing number of transfer reflected as additional costs. In order to construct the path finding conditions, an M-similar route searching method is proposed, embedded with non additive path cost which appears through inclusion of the stepwise transportation parameter. As well, sensitivity of the M-similar route method based on transportation card records is evaluated and a stochastic trip assignment model using M-similar path finding is constructed. From these, link trip and transfer trip results between lines of the Seoul metropolitan railway are presented.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.33-43
• /
• 2016

Public transportation card data, which is collected for purposes of the Integrated Public Transportation Fare System, provides neither transfer time nor transfer frequency occurring on the metropolitan city-rail (MCR). And because there are no transfer toll gates installed on the MCR, data on transfers between lines are estimated through means such as elicitations using survey questionnaire, or otherwise through macroscopic observations, which poses the risk of transfer time and frequencies being underestimated. For the accurate estimation thereof, an explanation of the transit path that arises between the Entry-and Exit-Gates must be provided. The purpose of this research is twofold : 1) to build a transit path model to reflect the current state of transfer movements on the basis of transportation card reader data, and 2) to deduce information on transfers occurring in the greater metropolis. To achieve these aims, the idea of Big Nodes is introduced in the model to align transportation card reader operation system characteristics with those of the MCR network. The link-label method is applied in the model as well to make certain that the MCR network runs in an effective manner. Administrative information obtained by the transportation card reader is used to derive transfer time and frequency both in the city's mid-zones, and in the Seoul-Gyeonggi-Incheon district's large-zones. Public transportation card data from a single specific day in year 2014 is employed in the building of the quantified transfer specific data. Extended usage thereof as providing comprehensive data of transfer resistance on the MCR is also examined.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.1-13
• /
• 2010

In this paper, we describe the result of the test-bed on Nation-wide Interoperable Transportation System connected with Interoperable Traffic Information Collection System, which was developed by Korea Financial Telecommunications & Clearings, KOREAIL NETWORKS, HiPlusCard and Samsung SDS. we constructed Nation-wide Interoperable Transportation System on 4 downtown bus routes, 20 stations on line 1 subway, 2 stations of a train and 2 sections of the Honam highway in Gwangju and Interoperable Traffic Information Collection System in Seoul University IC Card Center. So we operated that by 480 Several staff were given a test card and asked to try it for about 6 months. This test-bed is for demonstrates the accuracy, safety and credibility of the Nation-wide Interoperability standard technology and it can be applied to all of transportation practically. When the staffs contact the card to Purchase terminal, the card performs transaction with Purchase SAM in the terminal, then transactions ara used to calculate in Settlement system and Interoperable Traffic Information Collection System. Through the test-bed, we examined this process and found unexpected problems happening during the test operation and have successfully solved them. In addition, the results of the test-bed let us know what additional improvement might be required for System. The successful run of the test-bed was verified by an evaluation of the test-bed staff and a public survey.

• Journal of Industrial Convergence
• /
• v.18 no.1
• /
• pp.25-33
• /
• 2020

South Korea entered an aged society phase in 2017 with the elderly accounting for 14% or higher of the entire population. It is expected to enter a super-aged society phase in 2026. The mobility handicapped, including the disabled and the elderly, are expected to grow continuously, and the demand for transport service for the mobility handicapped will definitely increase further. Thus, there is thus a need for various research to increase the utilization rate of low-floor buses among the mobility handicapped. This study analyzed the locations of getting on and off transportation means, time of departure and arrival, purpose of use, and frequency of use by the day among the mobility handicapped by making use of the information about their use of special transport service run by the mobility support center for the mobility handicapped. The study then proposed a method of selecting locations for low-floor bus stops to reflect the distribution and need of getting on and off transportation means among the mobility handicapped with such spatial analysis techniques as geocoding, overlapping analysis, buffer analysis, and generate tessellations. Finally, the study selected 228 locations for low-floor bus stops in Cheonan and reported a need to add 35 low-floor bus stops after eliminating the ones where the locations overlapped the old ones.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.1
• /
• pp.31-40
• /
• 2023

Various policies and services are being implemented in Korea and other countries, such as the expansion of convenience facilities for mobility support, the provision of special means of transportation, and the establishment of public transportation route plans and fare policies based on data and AI-based movement pattern analysis to ensure the mobility rights of the weak in transportation. However, A research is still needed to improve service convenience in order to more conveniently use the desired means of transportation in a necessary situation from the viewpoint of the transportation vulnerable. This study examines the policies and services for the promotion of mobility for the transportation disadvantaged, and presents a MyData-based service model for mobility support for the transportation disadvantaged. In the proposed service model, the transportation-disabled person can freely choose and use the means of transportation according to individual circumstances, and receive the same transportation welfare voucher benefits provided by the state or government. The proposed service model defines the MyData platform that supports the safe collection and use of personal data, the authentication of traffic welfare recipients based on MyData, and the payment function for fee settlement after using the service as key components. In this research, the service satisfaction from the user's point of view was investigated by implementing the proposed service model and providing a demonstration service for the transportation vulnerable in Daejeon.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.793-799
• /
• 2023

This study classifies the types of urban railway stations that reflect the location characteristics of urban railway stations, the structure and form of station taxes, and the number of users, and the level of inconvenience in the transfer movement line for users by station type, the number and connectivity of transfer information, and the level of transfer convenience facilities. The number of installations, conflicts between users, and transfer information signs were analyzed. As a result of data analysis, it was found that the factors that cause the most inconvenience to urban rail users when transferring are the length and curvature of the transfer line, pedestrian density and number of passengers in the transfer passage, presence or absence of transportation convenience facilities, and the size and height of transfer information letters. These transfer inconveniences were objectified, quantified, and presented as evaluation indicators that can measure the transfer convenience of urban railway stations. Additionally, an evaluation scale was developed to measure the service level for each evaluation indicator. The evaluation scale for each indicator presented six levels by applying linear interpolation based on the maximum and minimum values of data derived through field surveys. However, it is judged that a comprehensive evaluation of transfer convenience that combines the importance and weight of each convenience evaluation indicator should be established through future research.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.109-120
• /
• 2006

Since the 1st of July, 2004, the public transport system of the Seoul metropolitan area has been rearranged. In the new system, bus lines are divided into 4 classes-wide area, arterial road, branch, and rotation lines with renewed fare system based on the total distance travelled. Since central control center known as the Bus Management System (BMS) integrates the entire system operation. it now becomes feasible to collect travel information and provide it to the users scientifically and systematically. The Purpose of this study is to forecast transit travel time using real-time traffic data coming from both buses and subway. This is significant contribution since provision of real-time transit information and easy access to it would most likely boost the use of mass transit system, alleviating roadway congestion in the metropolitan area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3D
• /
• pp.213-222
• /
• 2012

After enforcing 2007 semi-public management system of intra-city bus, Busan city has tried to promote the bus utilization through bus service improvements. As an effort for this, we attempted to clarify the main factors affecting to bus service satisfaction targeting intra-city bus users. In this study, 20 subcategories of intra-city bus service were assorted into 6 factors: Basic Service, Safe Driving, Route Information, Comfort, Cleanliness and Facilities, then the preference for each detailed bus service were analyzed. And the effects for bus service satisfaction were shown under the various conditions according to the general characteristics of intra-city bus users (gender, age), behavioral traffic characteristics (frequency of use, boarding time) and transportation environments (temperature, rainfall). These results would be important basic data for decision-making in bus policy for climate change and establishment of operating plan for bus utilization.

• Tunnel and Underground Space
• /
• v.17 no.4
• /
• pp.322-331
• /
• 2007

Hundreds of rock slopes are constructed along the road, highway and railroad in mountainous Kangwon province and managed by each authorities concerned. It is practically not possible to carry out detailed rock slope investigation owing to the tremendous number of slopes and budgetary limit. Therefore, it is reasonable to perform a step-by-step investigation consisted of basic and detailed survey program and practical rock slope hazard assesment method for person in charge is strongly required. Through the development and application of KSMR (Korean Slope Mass Rating), it was found that KSMR could be practically used as an alternative of SMR though the number of inputs were reduced. In addition, the difference of hazard assessment between KSMR and experts decreased in case of considering the height of slope.