• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.4
• /
• pp.864-870
• /
• 2017

This paper describes a Dual Buck Converter with mode control using variable Frequency to Voltage for portable devices requiring wide load current. The inherent problems of PLL compensation and efficiency degradation in light load current that the conventional hysteretic buck converter has faced have been resolved by using the proposed Dual buck converter which include improved PFM Mode not to require compensation. The proposed mode controller can also improve the difficulty of detecting the load change of the mode controller, which is the main circuit of the conventional dual mode buck converter, and the slow mode switching speed. the proposed mode controller has mode switching time of at least 1.5us. The proposed DC-DC buck converter was implemented by using $0.18{\mu}m$ CMOS process and die size was $1.38mm{\times}1.37mm$. The post simulation results with inductor and capacitor including parasitic elements showed that the proposed circuit received the input of 2.7~3.3V and generated output of 1.2V with the output ripple voltage had the PFM mode of 65mV and 16mV at the fixed switching frequency of 2MHz in hysteretic mode under load currents of 1~500mA. The maximum efficiency of the proposed dual-mode buck converter is 95% at 80mA and is more than 85% efficient under load currents of 1~500mA.

• Korean Journal of Plant Resources
• /
• v.19 no.5
• /
• pp.592-597
• /
• 2006

To understand the status of ferns' distribution of Gwangneung forest, flora survey was done during the period of April 2003 to November 2005. The results obtained from this study were as follows: Ferns identified and surveyed were 46 taxa including 9 families 17 genera 43 species 3 varieties were recorded in Gwangneung Forest. Hemicryrtophyte (H) was the most common dormancy from recorded in surveyed area. Epiphyte (E) and Hydatophyte (HH) were calculated as 4.3%, 2.2%, respectively and they were the lower value compared to those of other dormancy form. Consequently, $H-R_{3}-D_{1}-t$ was recorded as the most common life-form of ferns in Gwangneung Forest. Pteridophyta-Quotient (Ptph.-Q.) was calculated as 1.28 and it was the higher value compared to those of other neighboring mountains.

• Journal of Science and Technology Studies
• /
• v.4 no.2 s.8
• /
• pp.33-66
• /
• 2004

In these days, science is too complex and comprehensive scientific practices to be reduced to scientific knowledge. Also it's actors go beyond the limit of scientist society to the broad range of supporting system scientific journalism, education, and business. Science is very important cultural practice of our times. This Study focus on the effect of interdisciplinary approach in understanding modern science culture. First, this paper suggest the approach of public understanding of science(PUS) as a framework PUS has provided new perspectives for the relation of scientific knowledge and understanding. Traditional approach(so-called 'deficit model') regarded understanding as mere transportation of scientific knowledge. So it may be called 'knowledge-oriented approach' to understanding. But PUS consider understanding process of 'dynamic reconstructing' which is occurred in complex socio-cultural context. Second, this article analysis the Korea University STS course(2002-2003) 'Science Technology & Society' as the case study. The case study examine how interdisciplinary approach help students to understand 'sciene in the making'.

• The Korean Journal of Ecology
• /
• v.17 no.3
• /
• pp.367-378
• /
• 1994

The germination responses of Echinochloa crus-galli (L.) Beauv. seeds to temperature were examined under the various thermal conditions. While almost all the seeds tested did not germinate immediately after collection, almost of the seeds which were stored for 7, 10, and 17 months showed very high germination percentages (85-95%) at their own constant temperatures between $16^{\circ}C\;and\;40^{\circ}C$. The total thermal time which was required for germination(10-70%) of Echinochloa crus-galli seeds ranged from 539Kh(degree Kelvin X hour) to 1,279Kh in accordance with the distribution function of thermal time, $F({\Theta})=1-[3D^{-3}({\Theta}-m+D)+1]^{-1/2}$, where m is 935Kh and D is 555Kh. Moist chilling treatment at $2^{\circ}C$ for 20 days increased the final germination percentage as well as the germination rate. In the increasing temperature(IT1 regime, E. crus-galli seeds started to germinate at $12^{\circ}C$. and showed greater germination rate with increasing temperatures, with the final germination percentage of 80%. On the other hand, in the decreasing temperature(DT1 regime, the seeds began to germinate at $12^{\circ}C$(10% germination) with the final germination percentage of 20%. An induced dormancy occurred at $4^{\circ}C$ in the DT regime.

• Journal of Korea Water Resources Association
• /
• v.41 no.4
• /
• pp.423-432
• /
• 2008

The local migration or movement behavior of fishes in streams are related to feeding, spawning, growing, dispersing, and refuging. The pale chub (Zacco platypus) is a dominant species that migrates locally and inhabits in river and stream in Korea. However, dams, weirs, culverts and other regulatory structures are physical barriers that limit fish movement and fragment habits and populations. If main stream and off-channel habitats are connected with culverts, they would restrict the small fish as pale chub movement due to the high flow velocities and low depths. But in Korea, there is no experimental study to evaluate the swimming performance of species in Korea. Therefore, it is difficult to proposed that design guidelines for pass fishes through culverts. The purpose of this experimental study is to evaluate the swimming performance of pale chubs. A series of swimming performance test has been used in both of the fixed velocity and the incremental velocity methods in an experimental flume. As a result, the critical swimming speed for pale chub(body length 8.9 cm) was found to be about 0.7 m/s. Therefore, the flow velocity for culvert design in the low flow condition should not be exceed the its swimming ability, especially 0.7 m/s for pale chubs(body length 8.9 cm). And the minimum depth for culvert design in the low flow condition should not be lower than the fish body height add a dorsal fin height.

• Korean Journal of Materials Research
• /
• v.7 no.12
• /
• pp.1063-1069
• /
• 1997

For me1t-spun Fe-Nd-C alloys, variation of phase development and magnetic properties with the variety of alloy compositions and production conditions were investigated. To find out whether hard magnetic $Fe_{14}Nd_2C$ is crystallized direct1y from the melt by rapid quenching, the phase development of the as-spun ribbons spun at various speed was a1so studied. For the ribbons spun at 10m/s, ${\alpha}-Fe$ was the primary crystallization phase followed by the secondary $Fe_{17}Nd_2C$. At 20m/s ${\alpha}-Fe$ was suppressed so that the primary $Fe_{17}Nd_2C$ coexisted with the secondary ${\alpha}-Fe$ and the amorphous phase. Above 30m/s the ribbons were a1most amorphous, and the amorphization was complete at 40m/s. $Fe_{14}Nd_2C$ therefore was not found in as-spun state but obtained after heat treating the ribbons. The effective temperature range ($700{\sim}900^{\circ}C$) in which $Fe_{14}Nd_2C$ can be obtained was wider than that of a cast alloy. An alloy made with the wheel speed of 20 or 30m/s yielded higher coercivities after heat treatment. In iron-rich Fe-Nd-C, the composition range in which a high coercivity (more than 10kOe) is expected is narrow, i.e., 77~78 Fe and 7~8 C(at.%).

• Microbiology and Biotechnology Letters
• /
• v.15 no.2
• /
• pp.129-134
• /
• 1987

Aspergillus sp. (MK-24) producing a biological active substance that inhibited the venom proteinase activity was isolated from soil. The substance also inhibited the activity of trypsin and coagulation of blood, but did not inhibit papain, $\alpha$-chymotrypsin and pepsin. The substance was partially purified from culture filtrate by precipitaion with acetone, and by chromatography of DEAE-Sepadex A-50 column and Amberlite IRC-50 ion exchange. The inhibitory substance was stable in the wide pH range from 2.0 to 12.0 at 37$^{\circ}C$, but not stable at $65^{\circ}C$ in the alkaline pH. Only 12% of the activity was decreased by the heat treatment at 10$0^{\circ}C$ for two hours. The inhibition on venom proteinase (Agkistrodon bromohoffi brevicaudus) was a mixed type. The inhibitory activity depended on the preincubation time and completely depressed by cupric, zinc and cobalt ions. The inhibition on the venom proteinase was appeared strongly on casein but not on ovalbumin or hemoglobin as a substrate.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.147-154
• /
• 1998

Enzymatic hydrolysis using an immobilized enzyme was carried out to produce chitosan oligosaccharides (COSs) from chitosan effectively. Chitosanase was immobilized on eight different carriers by physical adsorption. The enzyme immobilized on chitin had higher activity than those immobilized on the other carriers in spite of its lower adsorption. The activity of chitin-immobilized enzyme was more than 90% of the original activity. Optimal temperature of the immobilized enzyme increased by about $15^{\circ}C$ and its thermostability was excellent in relatively wide range of temperature. But its effects of pH did not improve compared to the free enzyme. The immobilized enzyme produced 153 mg/g chitosan of the reducing sugar for 3hrs of hydrolytic incubation time. The total content of higher oligomers, tetramer to hexamer, among amount of total COSs obtained for 2hrs was more than 90%. In kinetic parameters for both enzymes, immobilized enzyme showed lower affinity for substrate and reaction rate than free enzyme, however, no reduction of the rate for high substrate concentrations. Consequently, chitin-immobilized could effectively hydrolyse chitosan and produce the higher COSs without activity decrease in comparison with the free enzyme.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.193-201
• /
• 2022

5-HMF(5-Hydroxymethylfurfural) and LA(levulinic acid) derived from biomass are green platform chemicals, which have a wide of potential applications as biofules and biochemicals. In this study, the kinetics of LA formation from glucose decomposition with various concentration of sulfuric acid at different temperature was investigated. The experiments were performed in a broad temperature (140-200 ℃), using H₂SO₄ (1-3 wt%) as the catalyst. Glucose solution was made by dissolving 1 g of glucose in 10 ml of H₂SO₄ solution. The reactions rates increased with temperature and the activation energy showed a similar tendency to previous reported values. Reaction time for maximum concentration of 5-HMF decreased as the temperature increased. Furthermore, the decomposition of 5-HMF was fast as the acid concentration increased. Reaction time to reach maximum concentration of levulinic acid was reduced as the acid concentration increased. Continuing to raise the temperature decreased the maximum concentration of levulinic acid and increased the amount of humins. On the basis of results, kinetic parameters help to understand mechanism of LA and 5-HMF. In addition, this study provides useful information to achieve high concentration of LA and 5-HMF from biomass.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.17-25
• /
• 2022

The pintle injector has many advantages in the key characteristics of a liquid rocket engine, such as combustion stability, combustion efficiency, and wide range of comprehensive thrust control, design and manufacture, and test fired under supercritical conditions. The pintle injector is manufactured with a rectangular, single-row orifice for thrust control and production considerations. In order to verify the combustion performance of the pintle injector and its potential as a commercial injector, the combustion characteristics were analyzed by varying the TMR (Total Momentum Ratio) and BF (Blockage Factor). The result of the hot firing test showed that the heat flux increased as TMR increased, and it confirmed that the characteristic velocity efficiency was more affected by BF than TMR. Suppose a single-row pintle injector with efficiency characteristics insensitive to changes in TMR can achieve high efficiency at low fuel differential pressure conditions. In that case, the variable pintle injector's design flexibility can be increase.