• Current Photovoltaic Research
• /
• v.12 no.2
• /
• pp.31-36
• /
• 2024

Passivating contacts are a promising technology for achieving high efficiency Si solar cells by reducing direct metal/Si contact. Among them, a polysilicon (poly-Si) based passivating contact solar cells achieve high passivation quality through a tunnel oxide (SiO_x) and poly-Si. In poly-Si/SiO_x based solar cells, the passivation quality depends on the amount of dopant in-diffused into the bulk-Si. Therefore, our study fabricated cells by inserting silicon oxide (SiO₂) as a doping barrier before doping and analyzed the barrier effect of SiO₂. In the experiments, p⁺ poly-Si was formed using spin on dopant (SOD) method, and samples ware fabricated by controlling formation conditions such as existence of doping barrier and poly-Si thickness. Completed samples were measured using quasi steady state photoconductance (QSSPC). Based on these results, it was confirmed that possibility of achieving high V_oc by inserting a doping barrier even with thin poly-Si. In conclusion, an improvement in implied V_oc of up to approximately 20 mV was achieved compared to results with thicker poly-Si results.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.1
• /
• pp.8-18
• /
• 2024

The present study concerns reduced order modeling of a marine diesel engine, which can be used for outlier detection in status monitoring and carbon intensity index calculation. Principal Component Analysis (PCA) is introduced for the reduced order modeling, focusing on the feasibility of detecting and treating nonlinear variables. By cross-correlation, it is found that there are seven non-linear data channels among 23 data channels, i.e., fuel mode, exhaust gas temperature after the turbocharger, and cylinder coolant temperatures. The dataset is handled so that the mean is located at the nominal continuous rating. Polynomial presentation of the dataset is also applied to reflect the linearity between the engine speed and other channels. The first principal mode shows strong effects of linearity of the most data channels to show the linearity of the system. The non-linear variables are effectively explained by other modes. second mode concerns the temperature of the cylinder cooling water, which shows small correlation with other variables. The third and fourth modes correlates the fuel mode and turbocharger exhaust gas temperature, which have inferior linearity to other channels. PCA is proven to be applicable to data given in binary type of fuel mode selection, as well as numerical type data.

• Current Photovoltaic Research
• /
• v.12 no.1
• /
• pp.1-5
• /
• 2024

Perovskite solar cells have exhibited a remarkable increase in efficiency from an initial 3.8% to 26.1%, marking a significant advancement. However, challenges persist in the commercialization of perovskite solar cells due to their low stability with respect to humidity, light exposure, and temperature. Moreover, the instability of the organic charge transport layer underscores the need for exploring inorganic alternatives. In the manufacturing process of the perovskite solar cells' oxide charge transport layer, ultraviolet-ozone (UVO) treatment is commonly applied to enhance the wettability of the perovskite solution. The UVO treatment on metal oxides has proven effective in suppressing surface oxygen vacancies and removing surface organic contaminants. This study focused on the characterization of nickel oxide as the hole transport material in perovskite solar cells, specifically investigating the impact of UVO treatment on film properties. Through this analysis, changes induced by the UVO treatment were observed, and consequent alterations in the device characteristics were identified.

• Applied Chemistry for Engineering
• /
• v.35 no.4
• /
• pp.329-334
• /
• 2024

To improve the UV absorbance and emulsion stability of sunscreen creams prepared using refined seabuckton oil, experimental conditions were designed utilizing the central composite design model-response surface methodology (CCD-RSM). The amount of surfactant, emulsification time, and thickener amount were chosen as independent variables, and the experiment was carried out after the reaction values of ESI, MDS, and UV absorbance at 290 nm were determined. The main effect and interaction effect, which have the most influence on the response value, were analyzed through the F-value and P-value of the regression equation coefficient calculated through RSM, and the statistical significance of the coefficient was evaluated through the P-value. The optimal emulsification conditions using RSM were calculated as follows: amount of surfactant (4.39 wt%), emulsification time (25.42 min), and amount of thickener (1.24 wt%). At these conditions, the reaction value was calculated as ESI (98.5%), MDS (32.9 nm), and UV absorbance (2.73). As a result of conducting an actual experiment under the calculated optimal conditions, the average error rate was measured as ± 2.7%

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.5
• /
• pp.1547-1552
• /
• 2014

AREX (Incheon Airport Railway Express) operates trains between Seoul and Incheon Airport. One type of trains stops on every 10 stations, and another only on the two end-stations which called an Express train. The passengers traveled on express trains are very small since there are only two stops, Seoul and Incheon Airport Stations. The passengers of express trains will be more attracted if the express train stops on the intermediate stops (Gimpo station) since Line #9 and Line #5 are connected to from Gangnam. An on-board survey was conducted to predict the potential demand in case the express train stops at the Gimpo station. Further the costs required to improve platforms of the station were estimated to figure out the economic feasibility against the demand increases. It analyzed 938 increases for the case of intermediate stopping on the same travel time condition and 1,299 increases for the case of extra stop with decreased travel time. The study concluded the latter case appears desirable in the stance of long-term while both cases are economically feasible.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2062-2073
• /
• 2014

Relationship learning is very important to grow and develop interorganization. Greatly to ours regret, relationship learning study have left unexplored with regard to interfirm's relationship. The purpose of this study is to analyze the effects of relationship benefits on relationship learning and cooperation of buyer-seller in food material industries. We collected statistically usable data from 228 questionnaire respondents who deal with food firms and analyzed them with SPSS 20.0 and Amos to achieve research's goals. Analysis results revealed that, first, relational benefits of economical benefits and psychological benefit had impacts on relationship learning between buyer and seller in food material channel market. Second, the survey found that relationship learning has impact on collaboration. Third, on the other hand, relationship benefits of social benefits had no effect relationship learning. Summary and strategy implication will be mention in conclusion.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.431-436
• /
• 2013

Ricania sp. lay eggs into the new twigs of blueberry and suck nutrients causing growth retardation and a sooty mold symptom. This study was conducted to investigate the emergence success and developmental period of overwintered eggs of Ricania sp. under the seven constant temperatures from 10 to $34^{\circ}C$ by $4^{\circ}C$ intervals (14L:10D). We also monitored the emergence time of the Ricania sp. nymph at blueberry by 3 ~ 4 day interval using a modified leaf clip cage. Development times from the overwintered egg to $1^{st}$ nymph were 107.1, 54.5, 33.9, 25.3, 25.1 and 16.7 days and the emergence successes were 23.1, 30.8, 13.8, 21.7, 11.9, and 0.6% at 14, 18, 22, 26, 30 and $34^{\circ}C$, respectively except at $10^{\circ}C$. The developmental periods were decreased with increasing temperatures. First emergence date of the nymphs in the field was between 19 and 22 May, and the average emergence success was 19.6%. The present study might be helpful to establish the management strategy of Ricania sp. based on the biological characteristic.

• Korean journal of applied entomology
• /
• v.52 no.4
• /
• pp.365-370
• /
• 2013

The plume fruit moth, Grapholita dimorpha Komai, a fruit tree pest occurring in the northeast Asia, was firstly reported to infest apple in Korea in 2009, but its direct damage to other fruit trees has been poorly studied. In this study, we investigated shoots and fruits of both peach and plum trees and compared their damage rates by G. dimorpha to those by G. molesta, a congeneric species. In order to discriminate the two moth species, we developed a molecular diagnosis method using species-specific primer sets on different PCR conditions and distinguished the two species collected from the damaged shoots or fruits. The shoots and fruits of peach were infested mostly by G. molesta. However, in plums, the shoots were damaged by G. molesta and the fruits mostly by G. dimorpha. In addition, these two species showed a clear difference in host preference in fruit damage, where 92.5% of the Grapholita moths collected in peach fruits were identified as G. molesta, but 97.0% of the moths in plum fruits were G. dimorpha. The difference of the damage between the two fruit trees may give important information for monitoring of the two moth species in these orchards.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.422.1-422.1
• /
• 2016

Graphene quantum dots (GQDs), a new kind of carbon-based photo luminescent nanomaterial from chemically modified graphene oxide (CMGO) or chemically modified graphene (CMG), has attracted extensive research attention in the last few years due to its outstanding chemical, optical and electrical properties. To further extended its potential applications as optoelectronic devices, solar cells, bio and bio-sensors and so on, intensive research efforts have been devoted to the CMG. However, the CMG, a suspension of aqueous, have problematic since they are prone to agglomeration after drying a solvent. In this study, we synthesized the GQDs from graphite and deposited on silicon substrate by kinetic spray. The photo luminescent properties of deposited GQD films were analyzed and compared with initial GQDs suspension. In addition, its carbon properties were investigated with GQDs solution properties. The properties of deposited GQD films by kinetic spray were similar to that of the GQDs suspension in water. We could provide a pathway for silicon-based silicon based device applications. Finally, the well-adjusted GQD films with photo luminescence effects will show Energy-Down-Shift layer effects on silicon solar cells. The GQD layers deposited at nozzle scan speeds of 40, 30, 20, and 10 mm/s were evaluated after they were used to fabricate crystalline-silicon solar cells; the results indicate that GQDs play an important role in increasing the optical absorptivity of the cells. The short-circuit current density (Jsc) was enhanced by about 2.94 % (0.9 mA/cm2) at 30 mm/s. Compared to a reference device without a GQD energy-down-shift layer, the PCE of p-type silicon solar cells was improved by 2.7% (0.4 percentage points).

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.171-179
• /
• 1997

During the day time in summer, peak of air conditing load, and electric power management system lies under overloaded condition. The reason is the enlarged peak load value of electric power caused by increased air-cooling load in summer. To prevent load concentration during day time and overloaded condition of power management system, some energy storage methods are suggested. One of these methods is ice storage system. Water has some good properties as P.C.M.(Phase Chang Material) : Its melting point is the range of required operation temperature. It has large specific latent heat and is chemically stable compared to other organic or inorganic substances. It is cheap and easy to treat. This study represents experimental results of heat transfer characteristics of P.C.M. under the outward melting process in a vertical cylinder. We experimented with twelve combinations of conditions, i.e., three different inlet temperatures($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$), two working fluid directions(upward and downward), and two aspect ratios, H/R(4 and 2). At the inlet temperature of $7^{\circ}C$ and $4^{\circ}C$, there was temperature stagnation region where the temperature of P.C.M. remains constant at $4^{\circ}C$ regardless of aspect ratio and direction of working fluid. This temperature stagnation occurs as the water, at its maximum density, flows down to the lower region. The phase change interface formed bell-shaped curve as the melting process continued. With a new set of conditions(4H/R, inlet temperature $4^{\circ}C$ and $1^{\circ}C$, downward/upwerd inlet direction), the movement of phase change interface was faster when the working flued inlet direction was downward. With the same set of conditions, melting rate and total melting energy were larger when the working fluid inlet direction was downward. The results were reversed when the other sets of conditions were applied.