• Journal of Korea Water Resources Association
• /
• v.46 no.12
• /
• pp.1193-1207
• /
• 2013

Increase of impervious area caused by overdevelopment has led to increase of runoff and then the problem of flooding and NPS were brought up. In addition, as decrease of base flow made groundwater level to decline, a stream that dries up is issued. low impact development (LID) method which is possible to mimic hydrological water cycle, minimize the effect of development, and improve water cycle structure is proposed as an alternative. As introduction of LID in domestic increases, the study on small watershed is in process mainly. Also, analysis of property of hydrological runoff and load on midsize watershed, like sewage treatment district, is required, the study on it is still insufficient. So, area applying LID practices from watershed of Dongrae stream is pinpointed and made the ratio and then expand it to watershed of Oncheon stream. Among low impact development practices, Green Roof, Porous Pavement, and Bio- retention are selected for the application considering domestic situations and simulated with SWMM-LID model of each watershed and improvement of water cycle and reduction of non-point pollution loads was analysed. Improvement of water cycle and reduction of non-point pollution loads were analyzed including the property of rainfall and soil over long term simulation. The model was executed according to scenario based on combination of LID as changing conductivity in accordance with soil type of the watershed. Also, this study evaluated area of LID application that meets the efficiency of conventional management as a criteria for area of LID practices applying to sewer treatment district by comparing the efficiency of LID application with that of conventional method.

• Korean Chemical Engineering Research
• /
• v.57 no.5
• /
• pp.637-651
• /
• 2019

In the event of a major accident such as an explosion in a refinery or a petrochemical plant, it has caused a serious loss of life and property and has had a great impact on the insurance market. In the case of catastrophic incidents occurring in process industries such as refinery and petrochemical plants, only the proximate causes of loss have been drawn and studied from inspectors or claims adjustors responsible for claims of property insurers, incident cause investigators, and national forensic service workers. However, it has not been done well for conducting root cause analysis (RCA) and identifying the factors that contributed to the failure and establishing preventive measures before leading to chemical plant's catastrophic incidents. In this study, the criteria of warning signs on CCPS catastrophic incident waning sign self-assessment tool which was derived through the RCA method and the contribution factor analysis method using the swiss cheese model principle has been reviewed first. Secondly, in order to determine the major incident warning signs in an actual chemical plant, 614 recommendations which have been issued during last the 17 years by loss control engineers of global reinsurers were analyzed. Finally, in order to facilitate the assessment index for catastrophic incident warning signs, the criteria for the catastrophic incident warning sign index at chemical plants were grouped by type and classified into upper category and lower category. Then, a catastrophic incident warning sign index for a chemical plant was developed using the weighted values of each category derived by applying the analytic hierarchy process (pairwise comparison method) through a questionnaire answered by relevant experts of the chemical plant. It is expected that the final 'assessment index for catastrophic incident warning signs' can be utilized by the refinery and petrochemical plant's internal as well as external auditors to assess vulnerability levels related to incident warning signs, and identify the elements of incident warning signs that need to be tracked and managed to prevent the occurrence of serious incidents in the future.

• Journal of Korean Home Economics Education Association
• /
• v.30 no.3
• /
• pp.19-42
• /
• 2018

The purpose of this study is to analyze the tasks of 'dietary life' in the textbook developed according to the 2015 revised middle school 「Technology·Home economics」 education curriculum based on the multiple intelligence teaching and learning methods. To accomplish this purpose, 12 textbooks of middle school 「Technology·Home economics」 textbooks were titled "Nutrition and Dietary Behavior of Adolescents", "Planning and Choosing Meals", "Choosing Foods and Safe Cooking" except the questions, the tasks that the students can perform are analyzed based on the teaching and learning methods using multiple intelligences. Analysis methods were analyzed by using contents analysis method, focusing on learning activities, and sub-questions of activities were all included in each activity, and the process of preparing activities on a continuous line was grouped into one. Three people analyzed the activities and proceeded to revise and supplement the analysis standard through consultation. The other three researchers confirmed it. As a result of analyzing 12 kinds of textbooks, the number of activity tasks was 25~74 for each kind of textbooks, and the total number of activities was 527. According to the ratio of multiple intelligences, 35% of the tasks were using logical-mathematical intelligence, and 26.8% of linguistic intelligence, 23% of intrapersonal intelligence, 7.2% of interpersonal intelligence, 3.8% of spatial intelligence, bodily-kinesthetic(2.7%) and musical intelligence(1.5%). On the other hand, it was analyzed that there is no activity task using naturalist intelligence. Except to the naturalist intelligence, general intelligence was utilized. This indicates that the home economics curriculum is a convergence of the home economics curriculum in that it is a reorganization by extracting the contents and methods of other curriculum related to dietary life, is interpreted. This study is expected to provide a framework for various teaching and learning methods to activate students' participation classes and to provide an alternative to realize convergence education in home economics curriculum.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.16 no.1
• /
• pp.193-206
• /
• 2014

The objectives of the project are to increase farmers' income through GAP and to reduce the loss of agricultural produce, for which the Korean partner takes a role of transferring needed technologies to the project site. To accomplish the project plan, it is set to implement the project with six components: construction of buildings, installation of agricultural facilities, establishment of demonstration farms, dispatching experts, conducting training program in Korea and provision of equipments. The Project Management Committee and the Project Implementation Team are consisted of Korean experts and senior officials from Department of Agriculture, Myanmar that managed the project systematically to ensure the success of the project. The process of the project are; the ceremony of laying the foundation and commencing the construction of training center in April, 2012. The Ribbon Cutting Ceremony for the completion of GAP Training Center was successfully held under PMC (MOAI, GAPI/ARDC) arrangement in SAl, Naypyitaw on June 17, 2012. The Chairman of GAPI, Dr. Sang Mu Lee, Director General U Kyaw Win of DOA, officials and staff members from Korea and Myanmar, teachers and students from SAl attended the ceremony. The team carried out an inspection and fixing donors' plates on donated project machineries, agro-equipments, vehicles, computers and printer, furniture, tools and so forth. Demonstration farm for paddy rice, fruits and vegetables was laid out in April, 2012. Twenty nine Korean rice varieties and many Korean vegetable varieties were introduced into GAP Project farm to check the suitability of the varieties under Myanmar growing conditions. Paddy was cultivated three times in DAR and twice in SAl. In June 2012, vinyl houses were started to be constructed for raising seedlings and finished in December 2012. Fruit orchard for mango, longan and dragon fruit was established in June, 2012. Vegetables were grown until successful harvest and the harvested produce was used for panel testing and distribution in January 2013. Machineries for postharvest handling systems were imported in November 2012. Setting the washing line for vegetables were finished and the system as run for testing in June 2013. New water tanks, pine lines, pump house and electricity were set up in October 2013.

• Korean Journal of Cognitive Science
• /
• v.13 no.4
• /
• pp.80-80
• /
• 2002

The main thesis of this article is that the decisive point of creativity education is the cultivation of critical thinking capability. Although the narrow conception of creativity as divergent thinking is not subsumed under that of critical thinking, the role of divergent thinking is not so crucial in the science context of creative problem-solving. On the contrary, the broad conception of creativity as focusing on the reference to utility and the third conception of creativity as a process based on the variation and combination of existing pieces of information are crucial in creative problem-solving context, which are yet subsumed under that of critical thinking. The emphasis on critical thinking education is connected with the characteristics of contemporary knowledge-based society. This rapidly changing society requires situation-adaptive or situation-sensitive cognitive ability, whose core is critical thinking capability. Hence, the education of critical thinking is to be centered on the learning of blowing-how and procedural knowledge but not of knowing-that and declarative knowledge. Accordingly, the learning of critical thinking is to be headed towards the cultivation of competence but not just of performance. In conclusion, when a rational problem-solving through critical and logical thinking turns out consequently to be novel, we call it creative thinking. So, creativity is an emergent property based on critical and logical thinking.

• Korean Journal of Cognitive Science
• /
• v.13 no.4
• /
• pp.81-90
• /
• 2002

The main thesis of this article is that the decisive point of creativity education is the cultivation of critical thinking capability. Although the narrow conception of creativity as divergent thinking is not subsumed under that of critical thinking, the role of divergent thinking is not so crucial in the science context of creative problem-solving. On the contrary, the broad conception of creativity as focusing on the reference to utility and the third conception of creativity as a process based on the variation and combination of existing pieces of information are crucial in creative problem-solving context, which are yet subsumed under that of critical thinking. The emphasis on critical thinking education is connected with the characteristics of contemporary knowledge-based society. This rapidly changing society requires situation-adaptive or situation-sensitive cognitive ability, whose core is critical thinking capability. Hence, the education of critical thinking is to be centered on the learning of blowing-how and procedural knowledge but not of knowing-that and declarative knowledge. Accordingly, the learning of critical thinking is to be headed towards the cultivation of competence but not just of performance. In conclusion, when a rational problem-solving through critical and logical thinking turns out consequently to be novel, we call it creative thinking. So, creativity is an emergent property based on critical and logical thinking.

• Journal of Venture Innovation
• /
• v.1 no.1
• /
• pp.1-14
• /
• 2018

The 4th Industrial Revolution is making a big change for our company like the tsunami. The CPS system, which is represented by the digital age, is based on the data accumulated in the physical domain and is making business that was not imagined in the past through digital technology. As a result, the business model of the 4th Industrial Revolution era is different from the previous one. In this study, we analyze the trends and the issues of business innovation theory research. Then, the business innovation model of the digital age was compared with the previous period. Based on this, we have searched for a business model suitable for the 4th Industrial Revolution era. The existing business models have many difficulties to explain the model of the digital era. Even though more empirical research should be supported, Michael Porter's diamond model is most suitable for four cases of business models by applying them. Type A sharing outcome with customer is a model that pay differently according to the basis of customer performance. Type B Value Chain Digitalization model provides products and services to customers with faster and lower cost by digitalizing products, services and SCM. Type C Digital Platform is the model that brings the biggest ripple effect. It is a model that can secure profitability by creating new market by creating the sharing economy based on digital platform. Finally, Type D Sharing Resources is a model for building a competitive advantage model by collaborating with partners in related industries. This is the most effective way to complement each other's core competencies and their core competencies. Even though numerous Unicorn companies have differentiated digital competitiveness with many digital technologies in their respective industries in the 4th Industrial Revolution era, there is a limit to the number of pieces to be listed. In future research, it is necessary to identify the business model of the digital age through more specific empirical analysis. In addition, since digital business models may be different in each industry, it is also necessary to conduct comparative analysis between industries

• Journal of Science and Technology Studies
• /
• v.18 no.2
• /
• pp.135-179
• /
• 2018

How do robots interact with the elderly? In this paper, we analyze the contexts of interaction between robots and the elderly and the role of mediators in initiating, facilitating, and maintaining the interaction. We do not attempt to evaluate the robot's performance or measure the impact of robots on the elderly. Instead, we focus on the circumstances and contexts within which a robot is situated as it interacts with the elderly. Our premise is that the success of human-robot interaction does not depend solely on the robot's technical capability, but also on the pre-arranged settings and local contingencies at the site of interaction. We select three television shows that feature robots for the elderly and one "dementia-prevention" robot in a regional healthcare center as our sites for observing robot-elderly interaction: "Grandma's Robot"(tvN), "Co-existence Experiment''(JTBC), "Future Diary"(MBC), and the Silbot class in Suwon. By analyzing verbal and non-verbal interactions between the elderly and the robots in these programs, we point out that in most cases the robots and the elderly do not meet one-to-one; the interaction is usually mediated by an actor who is not an old person. These mediators are not temporary or secondary components in the robot-elderly interaction; they play a key role in the relationship by arranging the first meeting, triggering initial interactions, and carefully observing unfolding interactions. At critical moments, the mediators prevent the interaction from falling apart by intervening verbally or physically. Based on our observation of the robot-elderly interaction, we argue that we can better understand and evaluate the human-robot interaction in general by paying attention to the existence and role of the mediators. We suggest that researchers in human-robot interaction should expand their analytical focus from one-to-one interactions between humans and robots to human-robot-human interactions in diverse real-world situations.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.215-222
• /
• 2021

Duchamp chose readymades mainly for his denial of retinal painting and his desire and fluid thinking for changes inside him. His thinking is well presented in his readymade works. One of his early readymades, Bicycle Wheel, expresses correlations between beings and capital. Its essence is capital and the desire of beings. It is connected to Desire or Desire-Machine proposed as a social reform and creation model by Gilles Deleuze and Félix Guattari. Bicycle Wheel does not simply end in desire relations between capital and beings, though. When the desire of beings is converted into positive desire, it can keep inventing and creating something that is repetitive, fluid, and new. Duchamp tried to convey this positive desire through his readymade Fountain. Duchamp created a ready-made article toilet into a work of art in Fountain, being driven by desire flowing inside him. This is connected to the attributes of nomads that refused to settle down and continue to flow in search of new landscapes. This way of his thinking is clearly reflected in his Box in a Valise. He was motivated to create this work by his fluid thinking. In this work, various situations can unfold often according to the directions of two elements, place and arrangement. Here, place guarantees fluidity, and arrangement variability or desire. According to Gilles Deleuze and Félix Guattari, fluidity represents nomads with the characteristics of flow and variation, and desire represents productivity or production or creation. Box in a Valise represents nomads themselves. The nomads defined by Gilles Deleuze and Félix Guattari keep flowing and create a new world. They are in line with the thinking of Duchamp that refused to settle down at one place and escape from the old order to create a new artistic world. This type of nomads can be called revolutionists or creators that acknowledge differences and create. Nomads also contain the concept of resistance to the old order. Deleuze and Guattari proposed a war machine as a model of this resistance. Duchamp and his readymades can thus be called war machines.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.3 no.2
• /
• pp.65-88
• /
• 2008

To achieve the age of 30,000 dollars GNP, The business with speed will hold a more crucial point than the business with scale, and the mass consumption market will be transformed and changed into the niche market. Moreover, it will not be easy for the company without the peculiar and creative technology to survive in the severe competition. Under these circumstances, The innovative company which knows how to use this new paradigm will select the better position in the changing market. Innovation type SMEs are contributing in maintaining the international competitiveness of domestic economy by serving high-tech and the promotion of employment. Also, Innovation type SMEs have the most important economic leverage in our domestic economy. It's a source of the growth in domestic economy. Therefore, A lot of countries have been trying to support innovation type SMEs (with a small capital and high-tech). And many countries also try to protect and promote the innovation type SMEs. Especially the Korean government is also promoting innovation type SMEs in many ways, because the future of innovation type SMEs are not bright. This study explored the three innovative SEMs and studied 1) entrepreneur characteristics, 2) the industry environment, 3) competitive strategies, and 4) resources and capabilities of organization, which have been considered as the success factors for entrepreneurial firms. This study also holds that the characteristics of entrepreneurs is one of the most important factor to impact the success of innovative SMEs. Most of entrepreneurs have started their business with high education career and field experiences and have high intentions in developing new/high techonologies, challenging spirits, and clear vision and goals. The innovative SMEs with small kinds of products and services, narrow market, and small resources are more sensitively impacted by the environment especially. But the SMEs which entered into market early could have the comparative excellencies in their market to survive and grow in the future. They also have competitive advantages in the market using differentiation strategies by technology innovation. Technology innovation and differention strategies are one of the success factors in SMEs, They entered into the niche market using this weapons. The capabilities of changing organization to their changing environment, the open orgarnization culture, the continuous employment education, and the building the organic organization are also success factors of innovative SMEs. The SMEs with the simple organization structure can make fast decisions and operate with the autonomous and flexible ways. These only three cases will not shown successful factors of over 12,000 Innovation type SMEs in Korea and this study of Innovation type SMEs is insufficient from all aspects. But this study have many implications for the future research and the entrepreneurs ready for their business.