• (The)Study of the Eastern Classic
• /
• no.67
• /
• pp.203-236
• /
• 2017

The objective of this study is to suggest the transmission direction and tasks of Ssireum, and the conclusions are like below. First, Ssireum has been designated as a national intangible cultural heritage(No.131) in December 2016. Second, in the current status of preservation and spread of Ssireum, there is no system related to the transmission of Ssireum such as cultivation of professional manpower, and facilities, programs, and administration/finance for transmitting Ssireum. Third, based on the "Intangible Cultural Heritage Preservation & Promotion Act", the transmission direction of Ssireum was suggested. (1)The designation of a college to transmit Ssireum would be needed. (2)The Ssireum curriculum should be established. (3) It would be necessary to secure trainees for transmitting Ssireum. (4)The production of teaching materials for transmitting Ssireum would be needed. (5)It would be needed to secure training institutes designated in each region and also teaching personnels for transmitting Ssireum. (6)The research direction for the correct transmission of Ssireum should be set up. Fourth, based on the "Ssireum Promotion Act", the transmission direction of Ssireum was suggested. (1)It is urgent to complement provisions for transmitting Ssireum. (2)For the transmission of Ssireum, instead of the transmission direction of Ssireum as a national intangible cultural heritage in the standardized perspective, it would be necessary to seek for the joint transmission direction between South & North Korea for research & documentation of Ssireum that could be systematized/shared between South & North Korea, development/spread of contents for discovering the original form of Ssireum, and the establishment of a base of transmission system for the preservation/promotion of Ssireum through the academic/institutional exchanges regarding Ssireum between South and North Korea. Moreover, the overall and fundamental transmission measures for the education, transmission, research, record, and informatization of Ssireum, and the cultivation of professional manpower should be established. Fifth, the contents of institutional tasks for Ssireum are like following. (1)The institutional complementation of the "Ssireum Promotion Act" should be done for the domestic/foreign promotion of Ssireum. (2)For the integration of Ssireum organizations, the administrative system should be unified. (3)The standard technical system manual for Ssireum should be produced. (4)The 'Ssireum Transmission Center' should be built for the preservation and systematic transmission of Ssireum. (5)The selection of a college for transmitting Ssireum and the establishment of a system to cultivate Ssireum successors should be done. (6)It would be necessary to establish database(DB) for the use of Ssireum techniques essential for the transmission of Ssireum.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.177-190
• /
• 2021

Due to the development of the fourth industrial revolution technology, efforts are being made to improve areas that humans cannot handle by utilizing artificial intelligence techniques such as machine learning. Although on-demand production companies also want to reduce corporate risks such as delays in delivery by predicting total production time for orders, they are having difficulty predicting this because the total production time is all different for each order. The Theory of Constraints (TOC) theory was developed to find the least efficient areas to increase order throughput and reduce order total cost, but failed to provide a forecast of total production time. Order production varies from order to order due to various customer needs, so the total production time of individual orders can be measured postmortem, but it is difficult to predict in advance. The total measured production time of existing orders is also different, which has limitations that cannot be used as standard time. As a result, experienced managers rely on persimmons rather than on the use of the system, while inexperienced managers use simple management indicators (e.g., 60 days total production time for raw materials, 90 days total production time for steel plates, etc.). Too fast work instructions based on imperfections or indicators cause congestion, which leads to productivity degradation, and too late leads to increased production costs or failure to meet delivery dates due to emergency processing. Failure to meet the deadline will result in compensation for delayed compensation or adversely affect business and collection sectors. In this study, to address these problems, an entity that operates an order production system seeks to find a machine learning model that estimates the total production time of new orders. It uses orders, production, and process performance for materials used for machine learning. We compared and analyzed OLS, GLM Gamma, Extra Trees, and Random Forest algorithms as the best algorithms for estimating total production time and present the results.

• Composites Research
• /
• v.34 no.4
• /
• pp.241-248
• /
• 2021

As the electric vehicle market grows, there is an issue of light weight vehicles to increase battery efficiency. Therefore, it is going to replace the battery module cover that protects the battery module of electric vehicles with high strength/high heat-resistant polymer composite material which has lighter weight from existing aluminum materials. It also aims to respond to the early electric vehicle market where technology changes quickly by combining 3D printing technology that is advantageous for small production of multiple varieties without restrictions on complex shapes. Based on the composite material mechanics, the critical length of glass fibers in short glass fiber (GF)/polycarbonate (PC) composite materials manufactured through extruder was derived as 453.87 ㎛, and the side feeding method was adopted to improve the residual fiber length from 365.87 ㎛ and to increase a dispersibility. Thus, the optimal properties of tensile strength 135 MPa and Young's modulus 7.8 MPa were implemented as GF/PC composite materials containing 30 wt% of GF. In addition, the filament extrusion conditions (temperature, extrusion speed) were optimized to meet the commercial filament specification of 1.75 mm thickness and 0.05 mm standard deviation. Through manufactured filaments, 3D printing process conditions (temperature, printing speed) were optimized by multi-optimization that minimize porosity, maximize tensile strength, and printing speed to increase the productivity. Through this procedure, tensile strength and elastic modulus were improved 11%, 56% respectively. Also, by post-processing, tensile strength and Young's modulus were improved 5%, 18% respectively. Lastly, using the FEA (finite element analysis) technique, the structure of the battery module cover was optimized to meet the mechanical shock test criteria of the electric vehicle battery module cover (ISO-12405), and it is satisfied the battery cover mechanical shock test while achieving 37% lighter weight compared to aluminum battery module cover. Based on this research, it is expected that 3D printing technology of polymer composite materials can be used in various fields in the future.

• Journal of the Daesoon Academy of Sciences
• /
• v.39
• /
• pp.137-174
• /
• 2021

The main theme of this paper centers on how to promote Three Major Works of Daesoon Jinrihoe, charity aid, social welfare, and education projects, during the unification period. Determining the best methods of promotion is crucial because the Three Major Works must be carried out after unification, and the works must remain based on the practice of the philosophy of Haewon-sangsaeng (the Resolution of Grievances for Mutual Beneficence). The idea of Haewon-sangsaeng is in line with the preface of the U.N. Charter and the aim of world peace. North Korean residents are suffering from starvation under their devastated economy, which is certain to face a crisis of materialistic deficiency during reunification. In this study, the peaceful unification of Germany, unification under a period of sudden changes in Yemen, and the militarized unification of Vietnam were taken as case studies to diagnose and analyze the conditions which would affect the implementation of the Three Major Works. These three styles of unification commonly required a considerable budget and other forms of support to carry out the Three Major Works. Especially if unification were to occur after a period of sudden changes, this would require solutions to issues of food, shelter, and medical support due to the loss of numerous lives and the destruction of infrastructure. On the other hand, the UNHCR model was analyzed to determine the implications of expanding mental well prepared and sufficiently qualified professionals, reorganizing standard organizations within complex situations, task direction, preparing sufficient relief goods, budgeting, securing bases in border areas with North Korea, and establishing networks for sponsorship. Based on this, eight detailed tasks in the field of system construction could be used by the operators of the Three Major Works to prepare for unification. Additionally, nine tasks for review were presented in consideration of the timing of unification and the current situation between South and North Korea. In conclusion, in the event of unification, the Three Major Works should not be neglected during the transition period. The manual "Three Major Works during the Unification Period" should include strategic points on organizational formation and mission implementation, forward base and base operation, security and logistics preparation, public relations and external cooperation, safety measures, and transportation and contact systems.

• Journal of Korea Entertainment Industry Association
• /
• v.14 no.7
• /
• pp.529-538
• /
• 2020

This study aims to develop of contents for the activities of daily living training - Korean version that reflexes the domestic situation and can be applied to clinical practice. For contents development, a Delphi survey was conducted with 13 experts. In the first Delphi survey, 133 items of activities of daily living training are derived based on previous studies, and then the extracted items are asked to group of experts, and the derived items are answered for actual domestic clinical application. In the second survey, 118 items were added by excluding items with a low content validity ratio (CVR) including the results of the first survey, and adding items that can be derived from other opinions. In the 3rd survey, while presenting the 2nd Delphi survey items as they are, it provides an opportunity to change their opinions by presenting their 2nd response and the 2nd average score of other expert panels, and adding appropriateness and importance together. The data were analyzed to obtain the mean, standard deviation, interquartile range, CVR, convergence, and consensus. Finally, a total of 69 items were selected and 49 items were excluded so that 105 items for CVR 0.54 or higher, 111 items for convergence degree 0.50 or lower, and 70 items for continuity degree 0.75 or higher. Sexual activity, care of others, care of pets, and child rearing are difficult to apply socially and culturally, driving and community mobility cannot be performed within the clinical room, and home establishment and management may have different roles depending on gender, and religious spiritual activities and expression are so personal. For these reasons, these items were found to have low importance or suitability. This study can be usefully used as an indicator on the activities of daily living training - Korean version in clinic or community setting.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.33-45
• /
• 2021

Due to recent changes in government policy, officetels have received attention as alternative assets, along with the uplift of office and apartment prices in Seoul. However, the current officetel price indexes use small-size samples and, thus, there is a critique on their accuracy. They rely on valuation prices which lag the market trend and do not properly reflect the volatile nature of the property market, resulting in 'smoothing'. Therefore, the purpose of this paper is to create the officetel price index using transaction data. The data, provided by the Ministry of Land, Infrastructure and Transport from 2005 to 2020, includes sales prices and rental prices - Jeonsei and monthly rent (and their combinations). This study employed a repeat sales model for sales, jeonsei, and monthly rent indexes. It also contributes to improving conversion rates (between deposit and monthly rent) as a supplementary indicator. The main findings are as follows. First, the officetel price index and jeonsei index reached 132.5P and 163.9P, respectively, in Q4 2020 (1Q 2011=100.0P). However, the rent index was approximately below 100.0. Sales prices and jeonsei continued to rise due to high demand while monthly rent was largely unchanged due to vacancy risk. Second, the increase in the officetel sales price was lower than other housing types such as apartments and villas. Third, the employed approach has seen a potential to produce more reliable officetel price indexes reflecting high volatility compared to those indexes produced by other institutions, contributing to resolving 'smoothing'. As seen in the application in Seoul, this approach can enhance accuracy and, therefore, better assist market players to understand the market trend, which is much valuable under great uncertainties such as COVID-19 environments.

• Korean Journal of Ecology and Environment
• /
• v.55 no.4
• /
• pp.274-284
• /
• 2022

Through sample-size-based rarefaction analyses, we tried to suggest the appropriate degree of sample concentration and sub-sample extraction, as a way to estimate more accurate zooplankton species diversity when assessing biodiversity. When we collected zooplankton from three reservoirs with different environmental characteristics, the estimated species richness (S) and Shannon's H' values showed different changing patterns according to the amount of sub-sample extracted from the whole sample by reservoir. However, consequently, their zooplankton diversity indices were estimated the highest values when analyzed by extracting the largest amount of sub-sample. As a result of rarefaction analysis about sample coverage, in the case of deep eutrophic reservoir (Juam) with high zooplankton species and individual numbers, it was analyzed that 99.8% of the whole samples were represented by only 1 mL of sub-sample based on 100 mL of concentrated samples. On the other hand, in Soyang reservoir, which showed very small species and individual numbers, a relatively low representation at 97% when 10 mL of sub-sample was extracted from the same amount of concentrated sample. As such, the representation of sub-sample for the whole zooplankton sample varies depending on the individual density in the sample collected from the field. If the degree of concentration of samples and the amount of sub-sample extraction are adjusted according to the collected individual density, it is believed that errors that occur when comparing the number of species and diversity indices among different water bodies can be minimized.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.273-281
• /
• 2016

In this study, after carrying out a bending test that targeted the frames of plastic film greenhouse, the load-displacement relationship was analyzed to be used as basic data to develop greenhouse construction and maintenance guidelines. As a result, regardless of the shapes of the specimen, the yield and the maximum load increased as the size of the specimen increased. The displacement also showed the same pattern. A steel pipe showed lower yield and maximum load than a square pipe, and the displacement was large. In the steel pipe case, the displacement under the yield and maximum load was in the range of approximately 1.42-4.20mm and 5.80-24.13mm, respectively. In the square pipe case, the displacement under the yield and maximum load was in the range of approximately 1.62-3.00mm and 3.13-8.01mm, respectively. Further, a large difference was observed between the result of this test and the values calculated by a conventionally provided standard. In particular, not much difference was found from the result of this test in the case of a purlin member from the values provided by previous researches. However, a large difference was observed in the column or main rafter members. Furthermore, when a wide-span and venlo type, which is a glasshouse, was used as a target(h/100 and h/80), the displacement under the yield and maximum load was approximately 28.0mm and 35.0mm, respectively, which showed a large difference compared with the Netherlands standard(14.0mm) of a glasshouse. Further, in the main rafter case, a large difference was observed in the displacement limit according to the width(i.e., span) of the greenhouse where members are used. Therefore, because the displacement limit can vary depending on various factors such as type, form, and size of a greenhouse, we determined that studies or tests that consider these factors should be carried out to reflect them in the construction and maintenance of greenhouses.

• Journal of Food Hygiene and Safety
• /
• v.38 no.6
• /
• pp.528-536
• /
• 2023

In Korea, from January 2023, the Act on Labeling and Advertising of Food was revised to reflect the use-by-date rather than the sell-by-date. Hence, the purpose of this study was to establish a system for calculating the safety factor and determining the recommended use-by-date for each food type, thereby providing a scientific basis for the recommended use-by-date labels. A safety factor calculation technique based on scientific principles was designed through literature review and simulation, and opinions were collected by conducting surveys and discussions including industry and academia, among others. The main considerations in this study were pH, Aw, sterilization, preservatives, packaging for storage improvement, storage temperature, and other external factors. A safety factor of 0.97 was exceptionally applied for frozen products and 1.0 for sterilized products. In addition, a between-sample error value of 0.08 was applied to factors related to product and experimental design. This study suggests that clearly providing a safe use-by-date will help reduce food waste and contribute to carbon neutrality.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.417-425
• /
• 2023

The aim of this study was to derive stem taper equations for Quercus acuta, one of main evergreen broad-leaved tree species found in warm temperate regions, and to prepare a stem volume table using those stem taper equations. A total of 688 individual trees were used in the analysis, which were collected from Jeonnam-do, Gyeongnam-do, and Jeju-do. The stem taper models applied to derive the stem curve pattern were the Max and Burkhart, Kozak, and Lee models. Among the three stem taper models, the best explanation of the stem curve shape of Q. acuta was found to be given by the Kozak model, which showed a fitness index of 0.9583, bias of 0.0352, percentage of estimated standard error of 1.1439, and mean absolute deviation of 0.6751. Thus, the stem taper of Q. acuta was estimated using the Kozak model. Moreover,thestemvolumecalculationwasperforme d by applying the Smalian formula to the diameter and height of each stem interval. In addition, an analysis of variance (ANOVA) was conducted to compare the two existing Q. acuta stem volume tables (2007 and 2010) and the newly created stem volume table (2023). This analysis revealed that the stem volume table constructed in the Wando region in 2007 included about twice as much as the stem volume tables constructed in 2010 and 2023. The stem volume table (2023) developed in this study is not only based on the regional collection range and number of utilized trees but also on a sound scientific basis. Therefore, it can be used at the national level as an official stem volume table for Q. acuta.