• 제목/요약/키워드: 기구합성

검색결과 219건 처리시간 0.022초

해상 선박의 전자파환경에 대한 연구 (A Study on Electromagnetic Environment of Marine Ship)

  • 김동식;박영환;조형래;민경식
    • 한국ITS학회 논문지
    • /
    • 제3권2호
    • /
    • pp.119-128
    • /
    • 2004
  • 최근 해상을 통한 선박의 교통량 증가와 선박의 디지털화로 인한 오동작으로 인해 해상에서 발생되는 사고가 증가하고 있다. 이에 따라 항해 안전에 관련하여 선박탑재용 장비에 대한 IMO(국제해사기구)의 결의에서 2002년 7월 1일 이후 건조되는 선박 선교에 대해서 SOLAS 협약에 의해 무선통신, 항해 관련기기에 대한 전자파장해 방지 및 내성의 규격을 강제 적용하고 있다. 본 논문에서는 선박의 기초적인 EMC 환경 조사의 필요성을 인지하고 선박의 EMC 환경 조사를 위해 한국해양대학교 실습선인 한바다호를 대상으로 측정하였다. 측정 장소는 실습선의 Bridge와 Engine Control Room이고 Test Point를 설정하여 측정하였다. 측정주파수 대역은 30MHz$\~20$Hz이고 편파 측정은 수평편파와 수직편파에 대해서 측정하였다. 측정된 결과값을 IEC에서 규정된 허용기준을 고려하여 선박의 EMC 환경을 분석하였다.

  • PDF

2, 4-Heptadione에 의한 Cu(II)의 용매추출특성 (Solvent Extraction of Cu(II) by 2,4-Heptadione in Chloroform)

  • 신정호;정갑섭;이상훈;박상욱;박대원
    • 공업화학
    • /
    • 제4권4호
    • /
    • pp.672-682
    • /
    • 1993
  • sodium amide에 의한 methylpropyl ketone과 ethyl acetate의 반응으로 2, 4-heptadione(이하 24HTD)을 합성하고, 클로로포름 용매하에 Cu(II)의 용매추출 실험으로부터 추출평형 및 추출속도 특성을 고찰하였다. 흡광도와 Cu(II)의 농도변화 측정으로부터 24HTD의 분배계수와 해리정수, 24HTD와 Cu 착화합물의 안정도 상수, 분배계수 및 총괄추출 평형정수 등을 구하고 추출기구를 구명하였다. 24HTD에 의한 Cu(II)의 추출 화학종은 1:2의 형태인 $CuR_2$였으며, 24HTD-클로로포름에 의한 Cu(II)의 총괄 초기 추출속도는 $R_0=k[\bar{HR}]([Cu^{2+}]/[H^+])^{0.5}$로 표시되었다.

  • PDF

64비트 블록암호 알고리듬 HIGHT의 효율적인 하드웨어 구현 (An efficient hardware implementation of 64-bit block cipher algorithm HIGHT)

  • 박해원;신경욱
    • 한국정보통신학회논문지
    • /
    • 제15권9호
    • /
    • pp.1993-1999
    • /
    • 2011
  • 한국기술표준원(KATS)과 국제표준화기구(ISO/IEC)에 의해 표준으로 채택된 블록암호 알고리듬 HIGHT용 저면적/저전력 암호/복호 코어를 설계하였다. HIGHT 알고리듬은 USN, RFID와 같은 유비쿼터스 환경에 적합하도록 개발되었으며, 128 비트 마스터 키를 사용하여 64 비트 평문을 64 비트 암호문으로, 또는 그 역으로 변환한다. 저면적과 저전력 구현을 위해 암호화 및 복호화를 위한 라운드 변환 블록과 키 스케줄러의 하드웨어 자원이 공유되도록 설계를 최적화하였다. 0.35-${\mu}m$ CMOS 표준 셀 라이브러리를 이용한 합성결과, HIGHT64 코어는 3,226 게이트로 구현되었으며, 80-MHz@2.5-V로 동작하여 150-Mbps의 성능을 갖는 것으로 평가되었다.

기계화학반응에 의한 TiN/TiB2/Ti-silicides 나노복합분말의 합성과 반응기구 (Synthesis of TiN/TiB2/Ti-silicides Nanocomposite Powders by Mechanochemical Reaction and its Reaction Mechanism)

  • 조영환;김지우;심재혁;안재평;오규환
    • 한국분말재료학회지
    • /
    • 제12권4호
    • /
    • pp.273-278
    • /
    • 2005
  • Nanostructured TiN/$TiB_2$/$TiSi_2$ and TiN/$TiB_2$/$Ti_5Si_2$ composite powders have been prepared by mechanochemical reaction from mixtures of Ti, BN, and $Si_3N_4$ powders. The raw materials have reacted to form a uniform mixture of TiN, $TiB_2$ and $TiSi_2$ or $Ti_5Si_3$ depending on the amount of $Si_3N_4$ used in the starting mixtures, and the reaction proceeded through so-called mechanically activated self-sustaining reaction (MSR). Fine TiN and $TiB_2$ crystallites less than a few tens of nanometer were homogeneously dispersed in the amorphous $TiSi_2$ or $Ti_5Si_3$ matrix after milling for 12 hours. These amorphous matrices became crystalline phases after annealing at high temperatures as expected, but the original microstructure did not change significantly.

선박의 EMC 환경 측정에 관한 연구 (A Study in EMC Environment Measuring of Marine Ship)

  • 김동식;조형래;민경식
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 춘계학술대회 논문집
    • /
    • pp.141-146
    • /
    • 2005
  • 최근 해상을 통한 선박의 교통량 증가와 선박의 디지털화로 인한 오동작으로 인해 해상에서 발생되는 사고가 증가하고 있다. 이에 따라 항해 안전에 관련하여 선박탑재용 장비에 대한 IMO(국제해사기구)의 결의에서 2002년 7월 1일 이후 건조되는 선박 선교에 대해서 SOLAS 협약에 의해 무선통신, 항해 관련기기에 대한 전자파장해 방지 및 내성의 규격을 강제 적용하고 있다. 본 논문에서는 선박의 기초적인 EMC 환경 조사의 필요성을 인지하고 선박의 EMC 환경 조사를 위해 한국해양대학교 실습선인 한바다호를 대상으로 측정하였다. 측정 장소는 실습선의 Bridge와 Engine Control Room이고 Test Point를 설정하여 측정하였다. 측정주파수 대역은 30MHz${\sim}$2GHz이고 편파 측정은 수평편파와 수직편파에 대해서 측정하였다. 측정된 결과값을 IEC에서 규정된 허용기준을 고려하여 선박의 EMC환경을 분석하였다.

  • PDF

모바일용 블록암호 알고리듬 HIGHT의 하드웨어 구현 (An implementation of block cipher algorithm HIGHT for mobile applications)

  • 박해원;신경욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.125-128
    • /
    • 2011
  • 본 논문에서는 한국기술표준원(KATS)과 국제표준화기구(ISO/IEC)에 의해 표준으로 채택된 블록암호 알고리즘 HIGHT의 효율적인 하드웨어를 구현하였다. HIGHT 알고리듬은 USN과 RFID와 같은 유비쿼터스 환경에 적합하도록 개발되었으며, 128 비트 마스터 키를 사용하여 64 비트 평문을 64 비트 암호문으로, 또는 그 역으로 변환한다. 저면적과 저전력 구현을 위해 암호화 및 복호화를 위한 라운드 변환 블록과 키 스케줄러의 하드웨어 자원이 공유되도록 설계 최적화를 하였다. $0.35-{\mu}m$ CMOS 표준 셀 라이브러리를 이용한 합성결과, HIGHT64 코어는 3,226 게이트로 구현되었으며, 80-MHz@2.5-V로 동작하여 150-Mbps의 성능을 갖는 것으로 평가되었다.

  • PDF

Co-Doped Willemite 파란색 안료의 합성과 생성기구 (Synthesis and Formation Mechanism of Cobalt Doped Willemite Blue Pigments)

  • 황동하;한경섭;이병하
    • 한국세라믹학회지
    • /
    • 제47권6호
    • /
    • pp.603-607
    • /
    • 2010
  • Turquoise blue pigment of Vanadium-zircon blue (DCMA number 14-42-2), which was already commercialized, was stable to be reproduced but insufficient to give strong blue. However, it possible to obtain more intense blue by partially substituting cobalt ions into the willemite($Zn_2SiO_4$) lattice classified into DCMA number 7-10-2 for blue ceramic pigment. By the composition of willemite $Co_xZn_{2-x}SiO_4$(X=0.01, 0.03, 0.05, 0.07, 0.09 mole), this study used reagent grade zinc oxide, cobalt oxide and silicon dioxide as starting materials, carrying out the synthesis with solid reaction method by adding $H_3BO_3$ as a mineralizer. The firing temperature was between $1200^{\circ}C$ and $1400^{\circ}C$. The characteristics of synthesized pigment were analyzed by X-ray diffraction, Raman spectroscopy and SEM and the characteristics of color tones were analyzed by UV-Vis spectroscopy and CIE-$L^*a^*b^*$ measurement. As a result, the optimal composition was $Zn_{1.95}Co_{0.05}$ with 1wt% of $H_3BO_3$ as a mineralizer and firing condition was $1350^{\circ}C$/3 h. $L^*a^*b^*$ value was 29.25, 41.03, -59.93 for on glaze pigment and 37.03, 36.41, -60.03 for under glaze pigment.

ZrTiO4계 Gray 안료 합성과 형성기구 (Synthesis and Formation Mechanism of ZrTiO4 Gray Pigment)

  • 황동하;이병하
    • 한국세라믹학회지
    • /
    • 제49권1호
    • /
    • pp.84-89
    • /
    • 2012
  • Attempts were made to develop a stable gray pigment at reducing atmosphere, substituting Ti in $ZrTiO_4$ with Mn, Fe, Co and Cu The pigment synthesized at $1300~1500^{\circ}C$ by solid state method with the composition of $ZrTi_{1-x-y}A_xB_yO_4$ (x = y = 0.005, 0.015, 0.035, 0.055, 0.075, 0.095, 0.115, 0.135, 0.155, 0.175 and 0.195 mole, A = Mn(III), Fe(III), Co(II, III) and Cu(II) (chromophores), B = Sb (counterion). The pigments were fired at $1400^{\circ}C$ for 3 h with substitute amount changes of Mn, Fe, Co and Cu to $ZrTiO_4$ crystals, and analyzed by Raman spectroscopy to figure out substitute limits. Results indicated 0.035 mole for Mn, 0.115 mole for Fe, 0.015 mole for Co and 0.015 mole for Cu as substitute limits, respectively. Figs. 1, 2, 3, and 4 represent each substitute pigments of Mn, Fe, Co and Cu. Synthesized pigment was applied to a lime and a lime-magnesia glaze at 7 wt% each, and fired at reducing atmosphere of $1240^{\circ}C$, soaking time 1h. Gray color was obtained with CIE-$L^*a^*b^*$ values at 44.55, -0.65, 1.19(Mn), 40.36, -0.90, 0.30(Fe), 42.63, -0.03, -1.49(Cu) and -40.79, -0.28, -0.91(Co), respectively.

반응 용기법을 이용한 InP/ZnS 양자점 합성과정에서 InP 코어의 성장기구 (Growth mechanism of InP and InP/ZnS synthesis using colloidal synthesis)

  • 서한욱;정다운;이빈;현승균;김범성
    • 한국분말재료학회지
    • /
    • 제24권1호
    • /
    • pp.6-10
    • /
    • 2017
  • This study investigates the main growth mechanism of InP during InP/ZnS reaction of quantum dots (QDs). The size of the InP core, considering a synthesis time of 1-30 min, increased from the initial 2.56 nm to 3.97 nm. As a result of applying the proposed particle growth model, the migration mechanism, with time index 7, was found to be the main reaction. In addition, after the removal of unreacted In and P precursors from bath, further InP growth (of up to 4.19 nm (5%)), was observed when ZnS was added. The full width at half maximum (FWHM) of the synthesized InP/ZnS quantum dots was found to be relatively uniform, measuring about 59 nm. However, kinetic growth mechanism provides limited information for InP / ZnS core shell QDs, because the surface state of InP changes with reaction time. Further study is necessary, in order to clearly determine the kinetic growth mechanism of InP / ZnS core shell QDs.

무수마레인산 생산을 위한 고정층 촉매 반응기 설계 (Design of the Fixed-Bed Catalytic Reactor for the Maleic Anhydride Production)

  • 윤영삼;구은화;박판욱
    • 공업화학
    • /
    • 제10권3호
    • /
    • pp.467-476
    • /
    • 1999
  • 공기에 의한 n-butane의 산화로부터 무수마레인산을 합성하는 고정층 촉매 반응기의 거동을 조사하였다. 대류-확산-반응기구로 묘사되는 고정층 촉매반응기의 거동은 Langmuir-Hinshelwood형의 반응속도식 및 비정상상태 이차원 유사균일상 모델을 적용 조사하였다. 예측모델은 Sharma의 pilot-plant 실험 결과인 단일층 반응기의 축방향 온도 및 수율 분포에 대한 최적적합을 통한 최적매개변수 추정에 의해 구성하였다. 또한 예측모델은 단일층 반응기와 통일한 수율 및 전화율을 생성시킬 수 있도록 모사된 불균열활성의 이중층 반응기가 열점에서 $8.96^{\circ}C$ 낮은 온도 상승을 일으켰다. 단일과 이중층 반응기의 가능한 조업조건 (냉매온도, 반응물의 농도, 온도 및 유량)변화에 대한 매개변수 감응도를 조사한 결과 동일한 조업 조건하에서 이중층 반응기가 단일층 반응기에 비해 더 넓은 조업범위는 물론 전화율 및 수율이 다소 높게 나타났다.

  • PDF