• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.275-282
• /
• 2021

High-molecular-weight maleic anhydride-grafted polylactic acids (HMMA-g-PLA) compatibilizers were prepared by melt grafting in a twin screw extruder using di(tert-butyl-perxoyisopropyl)benzene (PK-14; as initiator), maleic anhydride (MA), and divinylbenzene (DVB). To determine the properties of the prepared HMMA-g-PLA compatibilizers, Fourier transform infrared (FTIR), Melt index (MI), and back-titration analyses were performed. On increasing DVB concentration, grafting yield of HMMA-g-PLA increased but MI decreased because 𝛽-scission of PLA was restrained by the DVB, and thus, the molecular weight of HMMA-g-PLA increased. PLA-based wood-plastic composites (WPCs) were prepared using HMMA-g-PLA by melt blending through a single screw extruder. The flexural and impact strengths of WPCs compatibilized with HMMA-g-PLA were greater than those of WPCs produced without HMMA-g-PLA. Scanning electron microscope (SEM) studies indicated that increased mechanical properties were caused by excellent interfacial adhesion between PLA and wood fibers due to the addition of HMMA-g-PLA. However, rather high contents of HMMA-g-PLA reduced the mechanical properties of WPCs. We believe that lower molecular-weight of HMMA-g-PLA added as an compatibilizer, compared with PLA polymer, caused the reduction of mechanical properties.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.2
• /
• pp.35-43
• /
• 2011

Confined aquifer, which is separated with upper clayey or silty materials, is partially distributed at the depths of the sediments in Ddan-sum area on the lower Nakdong river. Measurements of groundwater levels at 13 sites explain that groundwater flow shows seasonally various due to seasonal rainfall and agricultural water use. From 9 long-term monitoring data of groundwater levels at 7 sites, 3 types of groundwater levels time series can be classified using principal component analysis. The first type is seen in the center of Ddan-sum and has a round-shape graph due to a weak response to stream water levels. The second type exists in the outer part of Ddan-sum and shows sharply peak-shape graph due to a rapid and strong response to stream water levels and rainfall. The last type, which is seen in a deep layer, has a periodicity by tital effect. From geochemical analysis at each monitoring sites, [$Ca-HCO_3$] type happens in the center of Ddan-sum far from Nakdong river, and [$Na-HCO_3$] and [$Ca-SO_4(Cl)$] types exist in the outer of Ddan-sum affected by river quality.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.2
• /
• pp.49-63
• /
• 2008

RDF is the base ontology model which is used in Semantic Web defined by W3C. OWL expands the RDF base model by providing various vocabularies for defining much more ontology relationships. Recently Jain and Farkas have suggested an RDF access control model based on RDF triple. Their research point is to introduce an authorization conflict problem by RDF inference which must be considered in RDF ontology data. Due to the problem, we cannot adopt XML access control model for RDF, although RDF is represented by XML. However, Jain and Farkas did not define the authorization propagation over the RDF upper/lower ontology concepts when an RDF authorization is specified. The reason why the authorization specification should be defined clearly is that finally, the authorizatin conflict is the problem between the authorization propagation in specifying an authorization and the authorization propagation in inferencing authorizations. In this article, first we define an RDF access authorization specification based on RDF triple in detail. Next, based on the definition, we analyze the authoriztion conflict problem by RDF inference in detail. Next, we briefly introduce a method which can quickly find an authorization conflict by using graph labeling techniques. This method is especially related with the subsumption relationship based inference. Finally, we present a comparison analysis with Jain and Farkas' study, and some experimental results showing the efficiency of the suggested conflict detection method.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.10 no.4
• /
• pp.81-93
• /
• 2000

In a methodological approach to improve the processing performance of modulo exponentiation which is the primary arithmetic in RSA crypto algorithm, we present a new RSA hardware architecture based on high-radix modulo multiplication and CRT(Chinese Remainder Theorem). By implementing the modulo multiplier using radix-16 arithmetic, we reduced the number of PE(Processing Element)s by quarter comparing to the binary arithmetic scheme. This leads to having the number of clock cycles and the delay of pipelining flip-flops be reduced by quarter respectively. Because the receiver knows p and q, factors of N, it is possible to apply the CRT to the decryption process. To use CRT, we made two s/2-bit multipliers operating in parallel at decryption, which accomplished 4 times faster performance than when not using the CRT. In encryption phase, the two s/2-bit multipliers can be connected to make a s-bit linear multiplier for the s-bit arithmetic operation. We limited the encryption exponent size up to 17-bit to maintain high speed, We implemented a linear array modulo multiplier by projecting horizontally the DG of Montgomery algorithm. The H/W proposed here performs encryption with 15Mbps bit-rate and decryption with 1.22Mbps, when estimated with reference to Samsung 0.5um CMOS Standard Cell Library, which is the fastest among the publications at present.

• Trans-
• /
• v.10
• /
• pp.73-113
• /
• 2021

Previous studies show that VR images can influence consumers' attitudes and behaviors by evoking imagination. In this study, we introduce a reality-based closed-loop 3D image (hereafter Virtualgraph). Then we try to see whether such image would increase evocativeness in a mobile commerce environment and whether higher telepresence of the visual image of a product can increase the purchase intention of that product. In order to find the above, we developed a model comprised of constructs containing telepresence, perceived value price, perceived food quality, and vividness of visual imagery questionnaire (VVIQ). We used Virtualgraph application to conduct an experiment, and then conducted an interview as well as a survey. As results of the experiment, survey and interview, we found the followings. First, users evoke imagination better with Virtualgraph than with still images. Second, increased evocativeness affects purchase intention if the perceived quality of fresh food product is satif actory. Third, increased evocativeness makes users value products higher and do even much higher when the perceived quality of fresh food product is good. From the interview, we could find that the experimental group had higher purchase intentions and perceived products as more expensive ones. Also, they perceived images of products clearer and more vivid than did the control group. We also discuss the strategic implications of using Virtualgraph in mobile shopping malls.

• Journal of Internet of Things and Convergence
• /
• v.7 no.2
• /
• pp.13-19
• /
• 2021

It is analyzed that the energy pattern is affected by the social matters of the disease trend where the energy consumption has been reduced following the depression of the national economy. The campaign of social distance for the people has been done by voluntary or legally due to the epidemic of the Coronavirus Disease 2019 (COVID-19). Some economic stimulus policies have been done in some countries including the United States, South Korea, and some others. It is shown the susceptible, infectious, and recovered (SIR) modeling applied by system dynamics (SD) where the logical modeling is constructed with S, I, and R. Especially, the I is connected with Society including Population, Race, and Maturity. In addition, Economy and Politics are connected to Income, GDP, Resources, President, Popularity, Ruling Government, and Leadership. The graph shows the big jump on 2020 April when is the starting month of the S value multiplication. This shows the effect of the COVID-19 and its related post-pandemic trend. The trends of OECD and non-OECD are very similar and the effect of the virus hazards causes significantly to the economic depressions.

• Membrane Journal
• /
• v.31 no.3
• /
• pp.212-218
• /
• 2021

It is inevitable to generate incomplete combustion gases when mankind utilizes fossil fuels. From this point of view, gas separation process of combustion gas suggests the possibility of recycling CO gas. In this study, we fabricated a facilitated transport polymeric composite membrane for CO separation using AgBF₄ and HBF₄. The copolymer was synthesized via free-radical polymerization of poly(vinyl alcohol) (PVA) as a main chain and acrylic acid (AA) monomer as a side chain. The polymer synthesis was confirmed by FT-IR and the interactions of graft copolymer with AgBF₄, and HBF₄ were characterized by TEM. PVA-g-PAA graft copolymer membranes showed good channels for facilitated CO transport. In this perspective, we suggest the novel approach in CO separation membrane area via combination of grafting and facilitated transport.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.4
• /
• pp.371-382
• /
• 2020

There have been continuous attempts to quantify sensory attributes of cosmetic products by measuring relevant physical properties. The most representative method to evaluate stickiness is to measure axial force using texture analyzer. Stickiness is known to correlate with AUC which abbreviates area under curve in the obtained axial force curve as a function of time. Recently, Normandie University research group developed in vivo stickiness evaluation method considering the characteristics of skin along with established evaluation method[8]. Based on the study, we tried to optimize in vivo stickiness evaluation method especially for cosmetic creams. The experiment was carried out on 5 different facial creams products by changing the amount and the times of rolling of creams, and the shape and material of probes. Based on the results of the sensory evaluation, the most consistent conditions were established as the optimal evaluation method. As a result, applying 70 μL of cream and rubbing 10 times for 7 s inside the 3.4 cm circle were judged to be suitable. As for the probes, spherical metallic probe was more proper due to its reproducibility. We conducted the settled method on 10 subjects to check its validity. Although the absolute values of AUC differed depending on the individuals, the AUC values were all ranked the same. Finally, for the standardization of stickiness of AUC, polyvinylpyrrolidone (PVP) was set as a reference material and we measured AUC of its aqueous solution by changing concentration. Then, the degree of stickiness recognition for 5 different creams was surveyed to check the correlation between AUC and stickiness.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.347-358
• /
• 2021

The purpose of this study was to investigate the stage of concern and use level of early childhood teachers' STEAM, and to find out whether there is a difference in the stage of concern according to individual teachers' variables. The subjects were 242 teachers in charge of 3-5 years old kindergarten and daycare center in G city. The research tool was the stages of concern questionnaire (SoCQ). The collected data were converted to relative intensity by applying percentile conversion chart in the guidelines, and this was expressed as a concern profile graph, and t-test and ANOVA were performed to find out the difference in concern according to teacher's background variables. The research results are as follows. First, the stage of concern in early childhood teachers' STEAM was identified as a critical non-user profile. Second, the stage of concern in the teacher's STEAM was judged as a person who did not use, or was implemented for less than 2 years, and was a non-user or a novice. In addition, it was found that most of the teachers did not receive formal education for STEAM. third. There were differences in the educational background, career, current execution status of teachers, whether or not to take related courses in pre-service teacher education, and whether to plan for future implementation. And there were no differences in the majors and institution types of teachers. Based on these results, a support plan for changing the stage of concern of teachers about STEAM and improving the level of use was suggested.

• The Journal of Korean Academy of Sensory Integration
• /
• v.19 no.1
• /
• pp.13-23
• /
• 2021

Objective : This study examined the effects of vestibular sensory integration on the sensory processing, problem behavior, and auditory behavior in children who had cochlear Implants. Methods : This single-subject AB study was conducted for 11 weeks from August to November 2019 with three children with cochlear implants. A pre-test measure of each child's sensory processing and auditory behavior was recorded with the baseline on operationally defined behavioral problems as four incidents during 40 minutes of free play with an occupational therapist. The treatment period was 15 40-minute sessions of vestibular sensory integration. Behavioral problems were monitored and recorded during each treatment session. Once treatment was complete, a post-test was conducted on the children's sensory processing and auditory behavior. Results : The sensory processing and auditory behavior of all three participants improved after the vestibular-focused sensory integration, and diverse problem behaviors showed decreasing trends during the interventions. Conclusion : Vestibular sensory integration leads to positive changes in the sensory processing, problem behavior, and auditory behavior of children with cochlear implants.