• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.333-334
• /
• 2012

본 논문은 LED 구동회로에서 DC/DC 컨버터회로를 분산하여 저발열, 부피저감이 가능한 새로운 구조의 LED 구동회로를 제안한다. 제안된 회로의 특징은 기존 벅컨버터에서 발열이 높고 부피가 큰 부품들을 제거하여 발열을 낮추고 부피를 줄이는 효과가 있다. 또한 전력을 분산시킴으로써 기존회로보다 소자의 전압, 전류스트레스가 감소한다. 제안한 회로를 검증하기 위해 이론적 분석결과를 통해 타당성을 검토하였고 전장용 LED 구동회로에 적용하여 실험을 통해 우수성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1482-1483
• /
• 2007

SI-Thyristor는 스위칭 특성상, turn on시에는 전압구동 특성을 지니며, turn off시에는 전류구동 특성과 전압구동 특성을 지니고 있기 때문에, 그 두가지 특성을 명확히 하여 스위칭 특성을 구분 짓는 것이 어렵다. 본 논문은 SI-Thristor-정전유도용량 사이리스터-의 펄스파워 어플리케이션으로 고안된 게이트 드라이버를 이용하여 직렬연결 특성을 측정했으며, 펄스파워 어플리케이션으로서의 SI-Thrysitor의 스위칭 특성과 그에 적합한 게이트 드라이버의 개선점과 특성에 대하여 기술되어 있다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1407-1409
• /
• 2005

본 논문에서는 32인치용 직하방식으로 사용되는 램프를 병렬로 구동하기 위한 멀티 램프 구동용 인버터를 설계하였다. 제작된 인버터는 6개의 램프를 병렬로 구동 할 수 있으며 램프에 흐르는 전류차이를 비교하여 휘도의 균일성을 검증하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05a
• /
• pp.386-392
• /
• 1996

기존의 아날로그로 구성된 제어봉구동장치 제어계통을 디지탈로 설계개선하기 위한 선행 작업의 일환으로 제어봉구동장치의 출력 신호를 모사하기 위한 제어봉구동장치 시뮬레이터가 개발 되었다. 개발된 시뮬레이터는 제어봉구동장치의 인출 및 삽입시에 마그네틱 코일로부터 검출되는 전류파형을 모사 할뿐만 아니라 제어봉구동장치가 비정상적으로 움직이는 기계적인 이상 상태를 모사 할 수 있도록 모델링 하였다. 시뮬레이터의 성능 검증을 위하여 영광 3,4호기 현장에서 수집한 제어봉구동장치 출력 신호 와 비교해 본 결과 제어봉구동장치의 거동을 잘 모사 함을 알 수 있었다. 이 시뮬레이터는 디지탈 제어봉구동장치 제어계통 개발시에 소프트웨어의 기능을 검증할 수 있고, 제어봉구동장치 제어계통을 설계개선할 경우 설계 도구로 사용할 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.5
• /
• pp.70-78
• /
• 2001

We have developed a novel driving system of 5' true color FED using voltage controlled PWM method which has current control effect. The proposed method has the advantage of voltage controlled pulse width modulation method and current control method. Also, we propose a new circuit model of FED subpixel for circuit simulation of FED driving circuits, considering some parasitic effects, i.e., cross talk, line coupling effect and leakage current to the adjacent cathode lines. Output stage of the data driving circuit is optimized using the proposed circuit model. In video data processing, FED controller uses the parallel processing of R.G.B input data, so duty ratio is maximized and brightness of FED increases. With this results, no noise and high quality performance is achieved in display of 5' true color FED.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.214-220
• /
• 2013

Small area LDO (Low drop-out) regulator with pass transistor using body-driven technique is presented in this paper. The body-driven technique can decrease threshold voltage (Vth) and increase the current ID flowing from drain to source in current. The technique is applied to the pass transistor to reduce size of area and maintain the same performance as conventional LDO regulator. A pass transistor using the technique can reduce its size by 5.5 %. The proposed LDO regulator works under the input voltage of 2.7 V ~ 4.5 V and provides up to 150mA load current for an output voltage range of 1.2 V ~ 3.3 V.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.6
• /
• pp.57-64
• /
• 1995

This paper deals with the modeling and simulation to control the torque and speed of an induction motor using field-oriented control methods. Rotor flux is estimated using the indirect sensing method based on the rotor circuit equation in the synchronously rotation reference frame, and slip angle and rotor position are calculated from rotor angular velocity and stator current. As results of modeling and digital simulation with a voltage source inverter, it is shown that the proposed scheme gives good static and dynamic performance to the induction motor drive.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.4
• /
• pp.322-331
• /
• 2002

In this paper, a single-phase to three-phase PWM converter topology using a single-phase half-bridge PWM rectifier and a 2-leg inverter for low cost three-phase induction motor drives is proposed. In addition, the source voltage sensor is eliminated with a state observer which controls the deviation between the model current and the system current to be zero. The converter topology is of lower cost than the conventional one, which gives sinusoidal input current, unity power factor, dc output voltage control, bidirectional power flow and VVVF output voltage. The experimental results for V/F control of 3Hp induction motor drives have been shown.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.4
• /
• pp.147-150
• /
• 2014

In this paper, pulse current type power supply for laser diode dirver is discussed. High speed high power laser has been using widely because it becomes using on medical or manufacturing equipment, but researches have not being occurred actively. Current profiling method is proposed for improved lifetime expectancy of laser diode(LD). The current waveform of driving LD is most important factor of the performance and lifetime of LD. The proposed method improves shape and stability of current waveforms, thus will effect right direction of lifetime expectation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1009-1014
• /
• 2012

This paper has proposed a 2,500 MHz ~ 2,570 MHz 0.13-${\mu}m$ CMOS RF front-end transmitter for LTE-Advanced systems. The proposed RF front-end transmitter is composed of a quadrature up-conversion mixer and a driver amplifier. The measurement results show the maximum output power level is +6 dBm and the suppression ratio for the image sideband and LO leakage are better than -40 dBc respectively. The fabricated chip consumes 36 mA from a 1.2 V supply voltage.