• Title/Summary/Keyword: 관성력

Search Result 246, Processing Time 0.037 seconds

Vibration/Structural-Integrity Analysis for Large Diesel Engines (대형 디젤 엔진의 진동/건전성 해석)

  • 박종포
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2001.05a
    • /
    • pp.41-49
    • /
    • 2001
  • 최근의 대형 디젤 엔진은 고성능, 고효율 및 제작비용 절감 등의 요구에 따른 경량화, 유연화 추세로 설계되고 있는 한편, 엔진 자체에서 발생하는 고유의 큰 기전력 (가스폭발력, 왕복동 관성력, 각종 우력) 때문에 항상 진동 문제에 노출되어 있다. (중략)

  • PDF

미세 유로에서 혼합에 대한 수치 모사

  • 김민찬;이동원;박준식;박효덕
    • Ceramist
    • /
    • v.7 no.3
    • /
    • pp.34-37
    • /
    • 2004
  • 최근 미세가공 기술의 발달로 미세계에서의 전달현상에 대한 관심이 증대되고 있다. 미세계에서는 몇 가지 물리적 효과들이 중요하게 된다. 미세 흐름에서는 관성력과 점성력의 비인 Reynolds 수가 아주 작게 되고 계의 길이 차원이 작아짐에 따라 표면력(suface force)의 효과가 중요하게 되면서 보통은 무시되었던 몇몇 효과들이 중요하게 된다. 그 중의 하나가 혼합이다. (중략)

  • PDF

Inertial Confinement Fusion by High Power Glass Laser (대출력 글라스레이저에 의한 관성밀폐핵융합)

  • 강형부
    • 전기의세계
    • /
    • v.28 no.11
    • /
    • pp.3-13
    • /
    • 1979
  • 현재 전개되고 있는 핵융합연구는 크게 두가지 방식으로 구분할수 있다. 즉 자장밀폐(Magnetic confinement)방식 및 관성밀폐(Inertial confinement)방식으로 구분된다. 관성밀폐방식에 의한 핵융합연구는 자장밀폐핵융합연구보다 훨씬 늦게 시작되었지만 그에 비슷한 큰 성과를 나타내고 있다. 특히 대출려글라스레이저에 의한 관성밀폐핵융합연구의 성과가 연저하다. 본문에서는 이 글라스레이저에 의한 핵융합에 관하여 그 개요를 해설하기로 한다.

  • PDF

Dynamic Analysis Design of Balance Shaft for Reducing Engine Inertia Force and Pitching Moment (엔진 관성력과 피칭모멘트 저감을 위한 밸런스샤프트의 동역학 설계)

  • Kim, Byeong Jun;Boo, Kwang Suk;Kim, Heung Seob
    • Journal of the Korea Convergence Society
    • /
    • v.13 no.4
    • /
    • pp.307-313
    • /
    • 2022
  • The importance of engine vibration reduction is increasing as the vehicle interior noise becomes more serious due to higher output and lighten weight trends. Recently, the balance shaft attachment has been proposed as a representative method for the engine vibration reduction. The balance shaft is a device that cancels the vibrations generated in the reciprocating motion of the piston and the conrod by using an arbitrary eccentric mass, and can improve fuel efficiency and ride comfort at the same time. This paper proposes the unbalance amount and shape of the balance shaft to induce and offset the inertia force generated by the engine structure. The proposed two-shaped balance shaft was implemented as an ADAMS multi-body dynamics model, and the reduction of the inertial force in the actual behavior was confirmed through dynamic simulation.

A Case Study of Evaluating Inertial Effects for Inverted T-shape Retaining Wall via Dynamic Centrifuge Test (동적원심모형실험을 이용한 지진 시 역T형 옹벽의 관성력 영향 분석 사례 연구)

  • Jo, Seong-Bae;Ha, Jeong-Gon;Choo, Yun-Wook;Kim, Dong-Soo
    • Journal of the Korean Geotechnical Society
    • /
    • v.29 no.4
    • /
    • pp.33-44
    • /
    • 2013
  • Mononobe-Okabe (M-O) theory is widely used for evaluating seismic earth pressure of retaining wall. It was originally developed for gravity walls, which have rigid behavior, retaining cohesionless backfill materials. However, it is used for cantilever retaining wall on the various foundation conditions. Considering only inertial force of the soil wedge as a dynamic force in the M-O method, inertial force of the wall does not take into account the effect on the dynamic earth pressure. This paper presents the theoretical background for the calculation of the dynamic earth pressure of retaining wall during earthquakes, and the current research trends are organized. Besides, the discrepancies between real seismic behavior and M-O method for inverted T-shape retaining wall with 5.4m height subjected to earthquake motions were evaluated using dynamic centrifuge test. From previous studies, it was found that application point, distribution of dynamic earth pressure and M-O method are needed to be re-examined. Test results show that real behavior of retaining wall during an earthquake has a different phase between dynamic earth pressure and inertial force of retaining wall. Moreover, when bending moments of retaining wall reach maximum values, the measured earth pressures are lower than static earth pressures and it is considered due to inertial effects of retaining wall.

Study of post-cyclone using CFD (Computational fluid dynamics) (CFD를 이용한 PoC부착 고효율 싸이클론에 관한 연구)

  • 조영민;이주열
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2001.11a
    • /
    • pp.431-432
    • /
    • 2001
  • 원심력을 이용한 대표적인 대기오염 방지 장치인 싸이클론은 1800년대 후반이래 공기나 배출가스로부터의 분진제거 및 입자분리에 폭 넓게 사용되어 왔다. 일반적으로 싸이클론은 간단한 구조로 되어 있으며, 조작이 용이하고 운전비용이 저렴할 뿐만 아니라 가혹조건에서의 사용이 가능하다는 장점이 있다 (Shepherd and Lapple, 1939). 입자의 관성력에 의해 분진을 분리하는 싸이클론으로서는 상대적으로 낮은 관성효과를 지니는 미세입자(주로 10$\mu\textrm{m}$ 이하)들에 대한 제어효율이 낮을 수 밖에 없다(Dirge and Leith, 1985). (중략)

  • PDF

Study of Required Frequency Ancillary Service Reserve for DC Distribution Connected Power System (직류 배전 투입 증가에 따른 필요 계통 주파수 조정 예비력 변동성 연구)

  • Suh, Jaewan;Jang, Gilsoo
    • Proceedings of the KIEE Conference
    • /
    • 2015.07a
    • /
    • pp.274-275
    • /
    • 2015
  • 에너지저장장치, 태양광 발전기, 전기자동차 등 직류 사용설비의 급증으로 인해 직류 배전 혹은 직류 마이크로그리드에 대한 관심이 증가하고 있다. 직류 배전은 전력변환을 최소화하여 효율이 높고 수변전 설비 공간이 절약되는 장점이 있다. 하지만 직류를 통해 계통에 연계된 부하와 설비들은 별도의 제어가 없으면 관성과 주파수-부하 반응을 제공할 수 없다. 따라서 직류 배전 투입이 늘어날수록 전력계통의 관성과 주파수-부하 반응이 감소하게 되어 계통 주파수 변동 발생 시 변동 속도와 크기가 증가하게 된다. 때문에 계통 운영자는 더 많은 주파수 조정 예비력을 확보하여야 한다. 본 논문에서는 동요방정식을 이용하여 직류 배전 투입에 따라 계통 관성과 주파수-부하반응이 줄어듦에 따라 변하는 필요 주파수 조정 예비력 량을 계산하는 방법을 제시하고 있으며 MATLAB을 이용하여 직류배전 투입 비율에 따른 필요 주파수 조정 예비력 량 변화를 모의하였다.

  • PDF

Use of dynamic absorber for reduction of shaft vibration in diesel engines of ship (축계진동 저감을 위한 동흡진기의 제안)

  • Park, Sok-Chu;Park, Kyung-Il;Kim, Jeong-Ryul
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.40 no.9
    • /
    • pp.743-748
    • /
    • 2016
  • Ship's diesel engines have intrinsic problem to make vibrations caused by cylinder explosion and unbalanced rotating mass. These vibrations might induce noises, are transferred to hull and neighboring structures and cause secondary vibrations. This paper suggests the use of an additional dynamic absorber with a sub-vibration system to reduce the aforementioned vibrations. This dynamic absorber is designed based on an analysis of the free vibration of the engine shafting system and the forced vibrations.

The Effects of Longitudinal Inertia Force and Shear Deformation on the Large Amplitude Vibrations of Beams (축방향의 관성력과 전단변형이 보의 진동에 미치는 영향)

  • Lee, Nack-Joo
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.1 no.2
    • /
    • pp.82-88
    • /
    • 1977
  • 1장이 축방향으로 자유로이 움직일 수 있는 단선지시보의 진동에 있어서 그 진폭이 크고, 축방향의 관성력과 전단변형을 고려할때 의 진동을 살폈다. 운동방정식을 처짐을 독립변수로 하는 비선형편미분방정식으로 표시하고, model expansion과 Galerkin 방법에 의해서 비정형연립상미분방정식으로 변형한 다음에 Perturbation method of muthod of multiple scale로 유사해를 구하였다. 또한 보의 진동수-진폭의 관계에 대한 일반적 표현을 구하고, 간단한 구체적 해에 대하여 1차근사해와 진동수-진폭관계를 계산하여 이미 이루어진 연구결과와 비교하였다.

An Improved Structural Analysis Method for Ocean Transportation of Marine Structures (해양구조물의 해상 운동을 위한 개선된 구조 해석에 관한 연구)

  • Cho, Kyu-Nam;Kim, Dae-Yeon
    • Journal of Ocean Engineering and Technology
    • /
    • v.4 no.2
    • /
    • pp.48-58
    • /
    • 1990
  • 본 논문은 해양구조물 중 특히 자켓이 부선에 설치되어 운송되는 시스템에 대한 개선된 해상 운송 해석에 대한 고찰이다. 해석 방법의 개선은 파력에 의해 발생되는 부선 운동에 따른 관성력의 추계적 처리에 기본을 두어 얻어지고 있다. 이 방법은 소위 말하는 강체 부선 방법과 연체 부선 방법의 중간적이라고 할 수 있으며, 두가지 방법의 단점을 보완하였다. 전형적인 자켓-부선 시스템에 대하여 유한요소법을 이용하여 모델링한 후 본 해석 방법을 적용하여 해상운송 해석을 수행하였으며, 자켓-부선간 반력을 구하여 기존의 방법과 비교 검토하였다. 본 방법은 현실적이고 효과적임이 증명되었다.

  • PDF