• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.4
• /
• pp.111-116
• /
• 2007

This study is aimed to analyze the accuracy of depth information of reservoir using the robot-ship equipped with GPS and echosounder. The accuracy of depth measurements by sounding data was analyzed according to change of robot-ship's speed in the water. The field experiment results showed that as robot-ship's speeds were slow, accuracy of sounding data were increased. Until Robot-ship's speed was up to 5 km/hr, the accuracy of sounding data were included reliable section of normal distribution.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2004.03a
• /
• pp.529-534
• /
• 2004

고해상도 위성영상을 이용하여 수치지도를 제작함에 있어 가장 큰 문제점은 레스터 자료인 위성영상에서 경계검출을 통해 벡터자료의 형태로 제작하는 어려움이 있다. 본 연구에서는 경계검출을 통하여 위성영상에서 지형의 경계를 검출해내고, 이를 스크린 디지 타이징 기법을 적용하여 벡터라이징 한 후 나타난 결과를 국토지리정보원의 수치지도와 비교하여 정확도를 비교ㆍ평가하였다. 대상 범위는 대전광역시 유성구 가정동 일부지역을 IKONOS로 촬영된 공간해상도 1m의 위성영상을 사용하였다. 위성영상의 전처리는 기하보정과 정사보정을 거친 후 영상강조를 하였고, 여러 가지의 필터링을 적용하여 경계검출을 수행하였다. 경계검출 방법 중에 하나인 Sobel 연산자를 적용한 후 축척 1:5,000 수치지도와의 중첩을 통하여 표준편차(Root Mean Square Error : RMSE)를 산출하여 비교ㆍ분석하였다. 그리고 스크린 디지타이징 기법을 적용하여 추출한 벡터자료를 건물, 도로 및 임야로 분류하여 수치지도와 중첩하여 정확도를 분석하였다. 그 결과 건물과 도로의 경우에는 공공측량 작업규정에서 정하고 있는 축척 1:5,000의 평면위치 허용오차 기준을 만족하고 있지만, 임야의 경우는 축척 1:10,000 이상의 허용오차기준에 만족되고 있음을 알 수 있었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.10 no.1 s.19
• /
• pp.37-49
• /
• 2002

RTK-GPS(Real Time Kinematic GPS) surveying technique which allows centimeter level three-dimensional coordinates in real time has been recognized as a major advance in the science of GPS positioning. And no longer is it necessary to wait until post-processed results are computed after the surveying has been completed in field. The purpose of this study is to present the accuracy and effectiveness of the determinated parcel coordinate by RTK-GPS surveying technique, through the analysis and comparison of the surveying results both in Total Station and RTK-GPS.

• Water for future
• /
• v.29 no.1
• /
• pp.203-212
• /
• 1996

The subject research attempts to develop a new temporal interpolation scheme for the method of characteristics. The proposed three-point time-line Lagrange interpolation Reachback (3PR) method is a temporal quadratic interpolation scheme using the three grid points near the intersection between a characteristic line and a previous time-line. The accuracy of the 3PR method is compared with those of temporal and spatial interpolation schemes such as Reachback, Upwind, and quandratic spatial interpolation methods for two pure advection problems. The results show that on the aspects of the numerical damping and/or oscillation the temporal interpolation schemes are better than the spatial ones under the same interpolation order conditions. In addition, the spatial ones under the same interpolation order conditions. In addition, the proposed 3PR method improves the accuracy of Reachback method as well as it contains the merits of time-line interpolation schemes.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.1 s.9
• /
• pp.139-145
• /
• 1997

Rapid development of city has made a lots of urban facilities buried under ground, therefore how to bury underground facilities and how to operate them becomes more and more important. However, due to shortage of composite operation data for burying the facilities under ground, a lots of individual and nation's properties have been destroted and even many people killed. under the circumstances, we need to detect the facilities in detail and in accuracy and we can surgest for underground facilities detecting accuracy as below.

• Journal of Broadcast Engineering
• /
• v.19 no.5
• /
• pp.677-686
• /
• 2014

This paper analyzes the 3D accuracy of stereo images captured from a mobile phone. For 3D accuracy evaluation, we have compared the accuracy result according to the amount of the convergence angle. In order to calculate the 3D model space coordinate of control points, we perform inner orientation, distortion correction and image geometry estimation. And the quantitative 3D accuracy was evaluated by transforming the 3D model space coordinate into the 3D object space coordinate. The result showed that relatively precise 3D information is generated in more than $17^{\circ}$ convergence angle. Consequently, it is necessary to set up stereo model structure consisting adequate convergence angle as an measurement distance and a baseline distance for accurate 3D information generation. It is expected that the result would be used to stereoscopic 3D contents and 3D reconstruction from images captured by a mobile phone camera.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.1
• /
• pp.121-128
• /
• 2016

Many studies are focused on image data and classifier for comparison or improvement of classification accuracy. Therefore studies are needed aspect of the training samples on supervised classification which depend on reference data or skill of analyst. This study tries to assess usability of field spectra as training samples on supervised classification. Classification accuracies of hyperspectral and multispectral images were assessed using training samples from image itself and field spectra, respectively. The results shown about 90% accuracy with training sample collected from image. Using field spectra as training sample, accuracy was decreased 10%p for hyperspectral image, and 20%p for multispectral image. Especially, some classes shown very low accuracies due to similar spectral characteristics on multispectral image. Therefore, field spectra might be used as training samples on classification of hyperspectral image, although it has limitation for multispectral image.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.5
• /
• pp.117-127
• /
• 2018

The author tried to propose the orthographic and DTM (digital terrain model) creation and evaluate the accuracy for an university campus using UAV (unmanned aerial vehicle) system. Most previous studies used GPS-based data, but in this paper, the observations of triangulation level measurements was used for comparison of accuracy. Accuracy analysis results showed that the operational requirements for aerial photographic standards are satisfied in all scenaries. The author confirmed availability in aviation photo measurements and applications using UAV (Drone). In order to create a sophisticated DTM and contour, we need to eliminate interference from building, trees, and artificial objects. The results of this study are expected to be used as the basis for future studies in the creation of DTM and the accuracy assessments using Drone.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.19-26
• /
• 2006

This study assessed the accuracies of the ground information extracting methods from the LiDAR data. Especially, it compared two kinds of method, one of them is using directly the raw LiDAR data which is point type vector data and the other is using changed data to DSM type as the normal grid type. The methods using Local Maxima and Entropy methods are applied as a former case, and for the other case, this study applies the method using edge detection with filtering and the generated reference surface by the mean filtering. Then, the accuracy assessment are performed with these results, DEM constructed manually and the error permitted limit in scale of digital map. As a results, each DEM mean errors of methods using edge detection with filtering, reference surface, Local Maxima and Entropy are 0.27m, 2.43m, 0.13m and 0.10m respectively. Hence, the method using entropy presented the highest accuracy. And an accuracy from a method directly using the raw LiDAR data has higher accuracy than the method using changed data to DSM type relatively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.529-534
• /
• 2009

In this study, we investigate the feasibility of modeling entire image strips that has been acquired from the same orbital segments. We tested sensor models based on satellite orbit and attitude with different sets(Type1 ~ Type4) of unknowns. We checked the accuracy of orbit modeling by establishing sensor models of one scene using control points extracted from the scene and by applying the models to adjacent scenes within the same orbital segments. Results indicated that modeling of individual scenes with 1st or 2nd order unknowns was recommended. We tested the accuracy of around control points, digital map using the HIST-DPW (Hanjin Information Systems & Telecommunication Digital Photogrammetric Workstation) As a result, we showed that the orbit-based sensor model is a suitable sensor model for making 1/25,000 digital map.