• Tunnel and Underground Space
• /
• v.31 no.4
• /
• pp.243-269
• /
• 2021

Since the early 2010s, the social importance of research and practical projects targeting deep geological disposal of high-level nuclear waste, underground CO₂ storage and characterization of deep subsurface by borehole investigation has been increasing. In this regard, there is also a significant increase in the need for in situ test technology to obtain quantitative and reliable information on the hydraulic characteristics of deep rock mass. Through years of research and development, we have independently set up Deep borehole Hydraulic Test System (DHTS) based on the key apparatuses designed and made with our own technology. Using this system, high precision constant pressure injection tests were successfully completed at the two 1 km boreholes located in Mesozoic granite and sedimentary rock regions, Gyeongju. During the field tests, it was possible to measure very low flow rate below 0.01 l/min with micro flow rate injection/control module. In this paper, the major characteristics of DHTS are introduced and also some results obtained from the high precision field tests under the deep and low permeable rock mass environment are briefly discussed.

• Journal of Life Science
• /
• v.28 no.2
• /
• pp.148-152
• /
• 2018

The patchiness of local environments within a habitat is assumed to be a primary factor affecting the spatial patterns of plants, and a randomization procedure is developed for testing the null hypothesis that only spatial association with patches determined the spatial patterns of plants. Chloranthus japonicus (Chloranthaceae) is an herbaceous perennial and a member of the genus Chloranthus in the family Chloranthaceae. The spatial pattern of C. japonicus was analyzed according to several patchiness indices, population uniformity or aggregation under different sizes of plots by dispersion indices, and spatial autocorrelation. Population densities (D) varied from 0.356 to 2.270, with a mean of 1.527. The values of dispersion indices ( at Mt. Ahop were lower than 1 at six plots ($2m{\times}2m$, $2m{\times}4m$, $4m{\times}4m$, $4m{\times}8m$, $8m{\times}8m$, and $8m{\times}16m$), but the two large plots ($16m{\times}16m$ and $16m{\times}32m$) were higher than 1. Thus, the aggregation indices ( were negative at Mt. Ahop, which indicates a uniform distribution. The two large plots ($16m{\times}16m$ and $16m{\times}32m$) had positive CIs. However, the values were not large (0.009 for the $16m{\times}16m$ plot and 0.038 for the $16m{\times}32m$ plot). The mean crowding ($M^{\ast}$) and patchiness index (PAI) showed positive values for all plots.

• Korean journal of applied entomology
• /
• v.58 no.4
• /
• pp.291-297
• /
• 2019

Since Metcalfa pruinosa was first reported in Koera, it has continually caused damage to sweet persimmon orchard in southern part of Korea. Metcafa pruinosa exist not only in farmland but also in forest areas, and are difficult to control due to the influx of individuals from near forest. M. pruinosa has been occurred in orchard and its surroundings because of various host range. Thus, it has been difficult to decide spatial range and control time for efficient management. In this study, occurrence and dispersal pattern of M. pruinosa in persimmon orchard were surveyed using clear sticky traps, and spatial patterns were analyzed with SADIE(Spatial Analysis by Distance IndicEs), based on location information at sticky traps. Spatial association between survey time was also analyzed to identify when the spatial pattern changed. In sweet persimmon orchard, M. pruinosa mainly dispersed in mid to late May, when the first instar hatches, and in August, emerging season of adult. The first instar nymphs hatched in mid-May were randomly distributed in orchard, but distribution was changed to aggregative pattern after dispersed surroundings of orchard. Adults showed random distribution pattern after immigration to orchard again. These tendency was also observed in density change at orchard and its surroundings, and matched to actual density of M. pruinosa in sweet persimmon trees.

• Journal of the Korea Computer Graphics Society
• /
• v.18 no.2
• /
• pp.9-15
• /
• 2012

In this paper, we propose a method to segment a color image into several meaningful regions. We suppose that the meaningful region has a set of colors with high frequency in the color image. To find these colors, the color image is represented as several sets of color points in RGB space. And when we use the density of points defined in this method, color belonging to a dense region of color points in RGB space refers to the color that appeared frequently in the image. Eventually, we can find meaningful regions by looking for regions with high density of color points using our level set function in RGB space. However, if a meaningful region does not have a contiguous region of the sufficient size in the image, this is not a meaningful region but meaningless region. Thus, the pixels in the meaningless region are assigned to the biggest meaningful region belonging to its neighboring pixels in the color image. Our method divides the color image into meaningful regions by applying the density of color points to level set function in RGB space. This is different from the existing level set method that is defined only in 2D image.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.19-37
• /
• 2017

Visible Infrared Imaging Radiometer Suite Day-Night Band (VIIRS-DNB) data provides a much higher capability for observing and quantifying nighttime light (NTL) brightness in comparison with Defense Meteorological Satellite-Operational Linescan System (DMSP-OLS) data. In South Korea, there is little research on the detection of NTL brightness change using VIIRS-DNB data. This study analyzed the spatial distribution and change of NTL brightness between 2013 and 2016 using VIIRS-DNB data, and detected its spatial relation with possible influencing factors using regression models. The intra-year seasonality of NTL brightness in 2016 was also studied by analyzing the deviation and change clusters, as well as the influencing factors. Results are as follows: 1) The higher value of NTL brightness in 2013 and 2016 is concentrated in Seoul and its surrounding cities, which positively correlated with population density and residential areas, economic land use, and other factors; 2) There is a decreasing trend of NTL brightness from 2013 to 2016, which is obvious in Seoul, with the change of population density and area of industrial buildings as the main influencing factors; 3) Areas in Seoul, and some surrounding areas have high deviation of the intra-year NTL brightness, and 71% of the total areas have their highest NTL brightness in January, February, October, November and December; and 4) Change of NTL brightness between summer and winter demonstrated a significantly positive relation with snow cover area change, and a slightly and significantly negative relation with albedo change.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.569-576
• /
• 2011

Recently the establishment of high accuracy 3D spatial information has been largely stimulated according to the increase in need of such 3D spatial information. In the fields of constructions and civil works, studies on increasing the productivity in these fields through converging them with other fields using the established 3D spatial information have been conducted. In such a tendency, BIM (Building Information Modeling) technologies have been rapidly applied to the fields of constructions and civil works. In particular, in the fields of constructions and civil works that represent a life span of plan-design-construction-maintenance, some BIM application methods and plans for the characteristics in each step have been proposed. Thus, the objective of this study is to simulate a project that is reasonable and can be optimized in connection with 3D spatial information and BIM technologies escaped from the conventional civil construction process that is based on empirical, statistical DB, and 2D information. For achieving this objective, 3D terrain data for the subject area engaged in this study using aerial photographs and airborne LiDAR was established. Also, a counter plan for the issues, which cannot be solved in the conventional methods for managing civil work projects, is applied through implementing bridge-based civil structure BIM by combining them with objective information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.485-492
• /
• 2012

Today, a digital airborne imaging sensor plays an important role in construction of the numerous National Spatial Data Infrastructure. However, an appropriate quality assesment procedure for the acquired digital images should be preceded to make them useful data with high precision and reliability. A lot of studies therefore have been conducted in attempt to assess quality of digital images at home and abroad. In this regard, many test fields have been already established and operated to calibrate digital photogrammetric airborne imaging systems in Europe and America. These test fields contain not only GCPs(Ground Control Points) to test geometric performance of a digital camera but also various types of targets to evaluate its spatial and radiometric resolution. The purpose of this paper is to present a method to verify the spatial resolution of the Intergraph DMC digital camera and its results based on an experimental field testing. In field test, a simple bar target to be easily identified in image is used to check the spatial resolution. Images, theoretically designed to 12cm GSD(Ground Sample Distance), were used to calculate the actual resolution for all sub-images and virtual images in flight direction as well as in cross flight direction. The results showed that the actual image resolution was about 0.6cm worse than theoretically expected resolution. In addition, the greatest difference of 1.5cm between them was found in the image of block edge.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.1-15
• /
• 2013

It is important to empirically investigate the typological characteristics of subway station areas considering the comprehensive elements of transit-oriented development (TOD) planning so that its implementation can be effective in attaining both increase in transit ridership and decrease in inordinate automobile dependence. This article aims to identify diverse features of subway station areas in Seoul known for good public transit system. After collecting and manipulating the measures on planning elements such as density, diversity and accessibility for TOD planning by distance-based buffer from a subway station, the article tried to interpret analysis results on their typological characteristics. They can be summarized with two conclusions. First, characteristics of landuse and public transit system can be distinctly differentiated in the Seoul subway station areas. It implies that both planning elements should have not been integrated for now. Second, the characteristics of public transit system can be divided by modes. They provide us that public transit system in Seoul needs to be more strongly integrated than current system.

• Journal of Life Science
• /
• v.26 no.8
• /
• pp.881-886
• /
• 2016

Cephalanthera erecta (Thunb. ex, Murray) is an herbaceous and a member of the genus Cephalanthera in the family Orchidaceae. The species is an herbaceous and has reputed Chinese medicinal value. It has been investigated the population density and spatial distribution of this species at Mt. Ahop in Korea during 2015. The spatial pattern of C. erecta was analyzed according to several patchiness indexes, population uniformity or aggregation under different sizes of plots by dispersion indices, and spatial autocorrelation. The mean crowding (M*) and patchiness index (PAI) showed positive values except one small plot (2 m × 2 m). Most natural individuals of C. erecta for plots were not uniformly distributed in the forest community. The small plots (2 m × 2 m, to 8 m × 16 m) of C. erecta were uniformly distributed in the forest community and large plots (16 m × 16 m and 16 m × 32 m) were aggregately distributed. Significant aggregations by Moran's I of C. erecta were partially observed within IV classes (12 m). Dissimilarity among pairs of individuals could found by more than 18.0 m. In conclusion, the geographic distribution of C. erecta is not even with varying degrees of size of plots and human activities give rise to density effects in the plots at Mt. Ahop in Korea.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.455-465
• /
• 2011

In order to assess and mitigate climate change, the role of forest biomass as carbon sink has to be understood spatially and quantitatively. Since existing forest statistics can not provide spatial information about forest resources, it is needed to predict spatial distribution of forest biomass under an alternative scheme. This study focuses on developing an upscaling method that expands forest variables from plot to landscape scale to estimate spatially explicit aboveground biomass(AGB). For this, forest stand variables were extracted from National Forest Inventory(NFI) data and used to develop AGB regression models by tree species. Dominant/codominant height and crown density were used as explanatory variables of AGB regression models. Spatial distribution of AGB could be estimated using AGB models, forest type map and the stand height map that was developed by forest type map and height regression models. Finally, it was estimated that total amount of forest AGB in Danyang was 6,606,324 ton. This estimate was within standard error of AGB statistics calculated by sample-based estimator, which was 6,518,178 ton. This AGB upscaling method can provide the means that can easily estimate biomass in large area. But because forest type map used as base map was produced using categorical data, this method has limits to improve a precision of AGB map.