Abstract
Today, a digital airborne imaging sensor plays an important role in construction of the numerous National Spatial Data Infrastructure. However, an appropriate quality assesment procedure for the acquired digital images should be preceded to make them useful data with high precision and reliability. A lot of studies therefore have been conducted in attempt to assess quality of digital images at home and abroad. In this regard, many test fields have been already established and operated to calibrate digital photogrammetric airborne imaging systems in Europe and America. These test fields contain not only GCPs(Ground Control Points) to test geometric performance of a digital camera but also various types of targets to evaluate its spatial and radiometric resolution. The purpose of this paper is to present a method to verify the spatial resolution of the Intergraph DMC digital camera and its results based on an experimental field testing. In field test, a simple bar target to be easily identified in image is used to check the spatial resolution. Images, theoretically designed to 12cm GSD(Ground Sample Distance), were used to calculate the actual resolution for all sub-images and virtual images in flight direction as well as in cross flight direction. The results showed that the actual image resolution was about 0.6cm worse than theoretically expected resolution. In addition, the greatest difference of 1.5cm between them was found in the image of block edge.
최근 디지털 항공영상 센서는 다양한 국가 공간정보기반구축에 큰 역할을 하고 있다. 하지만 고정밀의 신뢰성 있는 자료를 확보하기 위해서는 취득된 디지털영상에 대한 적절한 품질 평가 작업이 선행되어야 한다. 따라서 현재 관련분야의 연구가 국내외적으로 크게 주목을 받고 있다. 디지털카메라의 성능을 테스트하기 위한 영상해상력 검증용 테스트필드가 유럽과 미국 등에서 이미 설치 및 활용되고 있다. 이러한 테스트필드에는 카메라의 기하학적 성능분석을 위한 대공표지를 비롯하여 공간해상력 및 방사해상력 분석을 위한 다양한 형태의 타겟 역시 설치되어 있다. 본 연구에서는DMC 카메라의 공간해상력을 검증하기 위하여 영상에서 인식 가능한 크기의 바 타겟(bar target)을 제작 설치 후 항공촬영을 수행하였다. 연구에 사용된 DMC 영상의 이론적인 지상표본거리(GSD ; Ground Sample Distance)는 12cm 급으로, 촬영 비행방향과 비행방향의 직각방향에 대하여 보조영상과 집성영상에 대하여 각각 실제 해상력을 분석하였다. 연구결과 이론적인 해상력과 영상의 실제 해상력간의 차이는 약 0.6cm로 나타났으며, 블록의 가장자리에 위치한 영상에서 최대 1.5cm 정도로 나타났다.