• Journal of the Korea Concrete Institute
• /
• v.21 no.4
• /
• pp.489-499
• /
• 2009

It is quite difficult to predict the flexural strength of post-tensioned members with unbonded tendons (unbonded posttensioned members, UPT members) because of debonding behavior between concrete and prestressing tendons, which is different from that with bonded tendons. Despite many previous researches, our understanding on the flexural strength of UPT members is still insufficient, and thus, national codes use different methods to calculate the strength, which quite often give very different results. Therefore, this paper reviews various existing methods, and aims at proposing an improved rational strength model for UPT flexural members having better accuracy. Additionally, a database containing a large number of test data on UPT flexural members has been established and used for verification of the proposed flexural strength model. The analysis results show that the proposed method provides much better accuracy than many existing methods including the rigid-body model that utilizes the assumption of concentrated deformation and plastic hinge length, and that it also gives proper consideration on the effects of primary parameters such as reinforcement ratio, loading pattern, concrete strength, etc. Especially, the proposed method also well predicts the ultimate stress of unbonded tendons of over-reinforced members, which are often possible in construction fields, and high strength concrete members.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.897-903
• /
• 2011

This paper presents a highly linear power amplifier MMIC, having an output power level of about 1 watt, based on InGaP/GaAs hetero-junction bipolar transistor(HBT) technology for the 900 MHz band. The active bias circuit is applied to minimize the effect of temperature variation. Ballast resistors are optimized to prevent a current collapse and a thermal runaway. The fabricated power amplifier exhibited a gain of 17.6 dB, an output P1dB of 30 dBm, and a PAE of 44.9 % at an output P1dB from the one-tone excitation. It also showed a very high OIP3 of 47.3 dBm at an average output power of 20 dBm from the two-tone excitation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.394-402
• /
• 2013

This paper presents design, fabrication and ruggedness test of switching-mode power amplifier using GaN(Gallium Nitride) HEMT(High Electron Mobility Transistor) for S-band radar applications. The power amplifier is designed to Class-F for high efficiency. The input signal for the measurement of the power amplifier is pulse signal at $100{\mu}s$ pulse width and duty cycle of 10 %. The measurement results of the fabricated Class-F power amplifier are a power gain of 10.8 dB, an output power of 40.8 dBm, a power added efficiency(PAE) of 54.2 %, and a drain efficiency of 62.6 %, at the center frequency. We proposed reliability test set-up of a power amplifier for ruggedness test. And we measured output power and efficiency according to VSWR(Voltage Standing Wave Ratio) variation. The designed power amplifier achieved output power of 32.6~41.1 dBm and drain efficiency of 23.4~63 % by changing VSWR, respectively.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.5
• /
• pp.40-45
• /
• 2008

In this paper, a microstrip linear tapered slot antenna is designed. A tapered slot antenna(TSA) has many advantages such as low profile, low weight, easy fabrication, and compatibility with monolithic microwave integrated circuits(MMIC). In addition, it has demonstrated multi octave bandwidth, moderately high gain, and symmetrical E- and H-plane beam patterns. A feed network is implemented with transition between a microstrip and a slot line for the microstrip linear tapered slot antenna. The transition is consist of two sides. One side has a microstrip line, the other side has a slot line. The dimensions of the microstrip and slot line are ${\lambda}_m/4$ and ${\lambda}_s/4$ at the center of the cross section of the microstrip and slot line. In order to get broad bandwidth antenna characteristics, the tapered length is chosen as $4{\lambda}_o$ and termination width is chosen as $1.75{\lambda}_o$. Experimental results show that the microstrip tapered slot antenna has symmetrical E- and H-plane beam patterns with around 5GHz of bandwidth at center frequency of 5.0GHz.

• KSBB Journal
• /
• v.19 no.1
• /
• pp.83-87
• /
• 2004

This research was designed to investigate the effects of Estromon including FGF271 (Female Growth Factor 271) which was developed as a phytoestrogen for post- and pre-menopausal syndrome (PMS). The oral administration of two capsules of Estromon twice a day for 3 months significantly improved PMS (Post-/Premenopausal Syndrome) about 5 times more than placebo group (OR=5.04, 95% C.1. 1.40-18.14). In the group of 24 patients having taken Estromon, the concentration of alkaline phosphatase asn the bone marker decreased by -9.3${\pm}$9.5 IU/L after 3 months with a statistic significance. Since the concentration of osteocalcin as the other bone marker also decreased in more patients in Estromon group than in placebo group, the bone density might be expected to be improved in long-term treatment. Serum human growth hormone level increased in 17 out of 24 patients. Triglycerides decreased by -8.0${\pm}$40 (mg%) after 1 month and by -4.4${\pm}$36 (mg%) after 3 months in Estomon group while triglycerides increased in both cases in placebo group (p.0.01). Therefore, PMS patients might benefit from Estromon as a phytoestrogen supplement without any serious side effects.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.659-666
• /
• 2006

Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

• Proceedings of the KGS Conference
• /
• 2002.05a
• /
• pp.49-53
• /
• 2002

국토의 효율적 이용과 여가공간의 개발에 있어서 산악지형의 개발 잠재력은 무궁무진하다고 볼 수 있다. 그간에 산악지형의 개발은 관광자원으로서의 활용이라는 견지에서 무분별한 개발과 자연환경 훼손을 방치해왔던 것이 사실이다. 산악지형의 관광자원 활용은 그 범위에 있어서나 방법에 있어서 매우 다양한 방식을 채택할 수 있다. 한국의 산이 보유하고 있는 자연경관과 문화유적이 접목된 명산사찰을 활용한 문화관광, 자연자원의 보존과 경제 개발, 도시민의 위락 여가공간 제공이라는 세 가지 목적을 동시에 충족시킬 수 있는 산악형 자연공원, 동계스포츠 활동을 위한 스키리조트의 개발과 이용, 마지막으로 산악지형의 경제 발전을 위한 대체산업 육성이라는 취지 하에 등장한 산지 카지노리조트 등 사회, 문화, 경제, 보건, 오락 등 산지는 그 효용성을 날로 더해가고 있다. 산은 더 이상 인간과 격리된 공간이 아니라, 인간의 생활 공간이자 휴식공간이며, 다양한 여가행위를 위한 공간이다. 유럽 등 구미 관광 선진국에서는 이미 산악지형 고유의 경제적, 사회적 중요성에 입각하여 공간의 효율적인 정비를 통해 합목적적이고 친환경적인 산악형 리조트 건설을 통해 지속적인 개발을 추진하고 있으며, 개발에 일부제약이 뒤따르기는 하지만, 관광개발을 위해서 환경보존을 필수적인 조건으로 인식하고 있다. 다시 말하면 관광개발과 환경보존은 불가분의 관계에 놓여있다는 것이다. 따라서 산이 우리에게 가져다주는 이로운 점을 생각할 때 인간의 지나친 개발욕구와 몰지각한 자원활용을 위한 관점에서 산을 보아서는 아니될 것이다. 산을 개발하고 정비하여 관광자원으로 활용할 때보다 친환경적인 시각으로 접근해야 하며, 우리의 산이 우리에게 돌려줄 것을 생각하기 보다 우리가 산에게 해주어야 할 것이 무엇인지를 먼저 생각한다면, 산은 우리에게 경제적 이득과 함께 우리의 여가생활을 위한 최적공간으로 다가설 것이다(요약 및 결론에서 발췌)는pocyanidin C-1-3'-3" -3.'S _0-trigallate는 100rM에서 70%의 강한 저해효과를 나타냈으며,epigallocatechin-(4$\beta$$\longrightarrow$8)-epigallo-catechin-(4$\beta$$\longrightarrow$8)-catechin는 51%의 저해효과를 나타내었다. 산업적응용을 위해 분획한 폴리페놀군은 미백효과 검증실험인 tyrosinase 저해율 측정평가에서 폴리페놀 함량이 가장 높은 Fraction 111의 경우 Sooppm에서 74.2%의 높은 저해율을 나타내었다. 항산화력 실험에서는500pw1이상에서 강한 활성능을 보인 SOD 유사활성능을 제외한 나머지 DPPH와 xanthine oxidase 저해효과에서는 Fraction II와III 모두가50ppm이상에서 80% 이상의 높은 유리라디칼 소거능력을 나타내었다. 그리고 각 Fraction별 항균력 측정 결과 Fraction 르와 111이 우수하게 나타났고 항균활성은 그람음성균보다 그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군은 1.40$\pm$0.24(100%)에 비하여 I3C 저농도 투여 실험군(Group 1; 0.85$\pm$0.23; 61%, P<0.01), 그리고 I3C 고농도 투여 실험군(Group 2 ; 1.32$\pm$0.2

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.183-190
• /
• 2007

This paper presents the design of 860 MHz band transmitter for improving power amplifier's linearity using Cartesian feedback method. For eliminating the effects of gain, phase mis-match, and DC offset, we estimate the property variations using ADS software. The implemented Cartesian feedback transmitter exhibits IMD3 of -54 dBc at an output power of 43 dBm and this result shows that the linearity is improved for 22.4 dB, compared with the test of the power amplifier without Cartesian feedback system. Thus, we verify that the proposed Cartesian feedback transmitter can be applied to narrow-band transmitter systems.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.23-36
• /
• 2005

PLLs have been widely used for many applications including communication systems. This paper presents a VCO with an improved negative skewed delay scheme and a PLL using this VCO. The proposed VCO and PLL are intended for replacing traditional LC oscillators and PLLs used in communication systems and other applications. The circuit designs of the VCO and PLL are based on 0.18um CMOS technology with 1.8V supply voltage. The proposed VCO employs subfeedback loops using pass-transistors and needs two opposite control voltages for the pass transistors. The subfeedback loops speed up oscillation depending on the control voltages and thus provide a high oscillation frequency. The two voltage controls have opposite frequency gain characteristics and result in low phase-noise. The 7-stage VCO in 0.18um CMOS technology operates from $3.2GHz\~6.3GHz$ with phase noise of about -128.8 dBc/Hz at 1MHz frequency onset. For 1.8V supply voltage, the current consumption is about 3.8mA. The proposed PLL has dual loop-filters for the proposed VCO. The PLL is operated at 5GHz with 1.8V supply voltage. These results indicate that the proposed VCO can be used for radio frequency operations replacing LC oscillators. The circuits have been designed and simulated using 0.18um TSMC library.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.38 no.6
• /
• pp.106-112
• /
• 2001

Unfortunately, the area without economical efficiency, especially the far distance sea, is much lower than that of a urban area-built-up area. It should be promoted the equivalent level to a urban area in the light of future-oriented universal service. Actually, Because propagation environment of mobile communication in the sea is greatly different from that for inland focused on built-up area, a propagation prediction model in the sea should be distinguished from inland-based one. Accordingly, the purpose of this study is to suggest the propagation prediction model for the sea service as a method to minimize unnecessary facilities investment and maintenance caused by additional or new building of a base station. If mobile phone service for far distance sea is provided by expanding limited communication zone of narrow band CDMA mobile communication whose spread band FA is 1.2288MHz. Suggested propagation prediction model includes five parameters to minimize facilities investment of a base station and maximize channel capacity: equivalent line of sight, chip delay by PN code, antenna altitude, power of base station and gain of antennas. Finally, suggested propagation prediction model is simulated and, the results are examined for its utility by comparing with loss of free space.