• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.905-908
• /
• 2006

In this study examines physical and mechanical properties the use of domestic low grade meta-kaolin in light weight porous concrete. For this purpose light weight porous concrete incorporating low grade meta-kaolin admixture, was tested for tensile strength and acoustic characteristics. Checking tensile strength of cement and low grade meta-kaolin mixture was used to determine the optimum mix proportion of the low grade meta-kaolin admixture. In this paper sound absorbing material has been investigated by using the light weight porous concrete.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.216-223
• /
• 2019

이 연구의 목적은 바텀애시 골재와 기포를 융합한 경량 콘크리트(bottom ash based lightweight concrete, LWC-BF)의 압축 응력-변형률 모델 제시이다. Yang 등이 제시한 응력-변형률 곡선식에서 LWC-BF 9 배합의 실험으로부터 얻은 탄성계수, 최대응력 시 변형률 그리고 최대응력 이후 최대응력의 50% 응력 시 변형률 값들을 이용하여 상승부와 하강부의 기울기를 결정하였다. 제시된 모델은 기포 혼입율의 증가와 함께 감소되는 초기 강성 및 증가되는 하강부 기울기를 잘 반영하면서 실험결과와 잘 일치하였다. 제시된 모델의 예측값과 실험값의 평균제곱근 오차로부터 결정된 평균값과 표준편차는 각각 0.19와 0.08로서 각각 1.23과 0.47 값을 보이는 fib 2010 모델에 비해 현저히 낮았다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.132-133
• /
• 2014

In this study, high volume of industrial by-products including blast furnace slag, recycled aggregate powder and incineration ash have been utilized on the slurry of the foamed lightweight concrete. As to decrease the price of the lightweight foam concrete, mortar based slurry and concrete based slurry has been fixed. As the variation of the foam conduction ratio and aggregates, the foam ratio and compressive strength has been tested. Results showed that using recycled aggregates in the slurry showed better effect than using natural aggregates due to the alkali properties of the recycled aggregates could activate the potential hydraulic properties of the blast furnace slag. Consider about the low price of the recycled aggregates, it could be identified that using recycled aggregates in high volume blast furnace slag blended lightweight concrete showed better compressive strength than natural aggregates.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.189-190
• /
• 2016

Lightweight concrete is currently used at apartment buildings or housing construction sites causes some uneconomical problems due to excessive cracks and subsidences. So, it is in the situation that it is necessary to set up countermeasures against such subsidences. Therefore, in this study, it is intended to analyze the prevention of a subsidence inducing the expansion of the aluminum components depending on the changes of substitution rate and bubble mixing ratio by using the bubble-based Leavening Agent that Aluminum slag as an industrial by-product is substituted into some desulfurized plaster. As the results, it was found that the blending ratios, such as, the substitution ratio of bubble-based leavening agent (1%) and the bubble mixing ratio (65%) are appropriate while the flow property, subsidence depth and compression strength are considered.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.19-20
• /
• 2018

As energy related problems continue to arise, Korea's thermal insulation market for the zero energy homes is also demanding major changes, but there are no realistic countermeasures. Also, interest in inorganic insulation is growing as damage from multifamily housing fire using flammable insulation materials is increasing. On the other hand, many studies have been conducted on lightweight foam concrete, which implies a sufficient possibility as an insulation material by generating a large amount of air bubbles. However, studies of existion bubble concrete are not quantified by the experimental difficulty of using bubbles when compared. Therefore, in this study, the change in strength due to air pressure using a bubble foam, one of the types of air bubbles for the development of light foam concrete.

• 콘크리트학회논문집
• /
• 제18권6호
• /
• pp.743-748
• /
• 2006

본 논문은 오토클레이브 양생과정 없이 제작되는 섬유보강 경량골재 콘크리트(FRLAC)의 섬유 혼입률에 따른 역학적 특성의 변화를 알아보기 위해 수행된 실험적 연구의 결과에 대해 서술하고 있다. FRLAC는 폴리프로필렌 섬유와 경량골재를 혼입함으로써 기포 콘크리트의 강도를 증진시켰다. 섬유의 혼입률이 FRLAC의 역학적 특성에 미치는 영향을 알아보고 최적 섬유 혼입량을 결정하기 위해 폴리프로필렌 섬유의 혼입률이 0%, 0.10%, 0.25%, 0.50%인 공시체들을 제작하여 일련의 압축강도시험과 휨강도시험을 수행하였다. 시험 결과 0.25%의 섬유 혼입률에서 압축강도가 가장 많이 증대되었고, 섬유가 FRLAC의 균열진전을 제어함을 알 수 있었다.

• 콘크리트학회논문집
• /
• 제24권1호
• /
• pp.61-70
• /
• 2012

최근 정부는 '저탄소 녹색성장 기본법'을 시행하여 국가 총체적 차원에서 에너지 절감, 온실가스 저감을 위한 노력을 기울이고 있다. 건물부문에서는 건물외피와 단열재의 열적 특성을 검토하여 건물 자체의 단열성능을 높임으로써 에너지를 절감할 수 있다. 이 연구는 건물부문의 에너지 절감을 목적으로 건물에 적용 가능한 경량기포 콘크리트 단열패널을 개발하기 위한 연구로서, 기포제 종류(AES, AOS, VS, FP)와 기포제 희석농도(1%, 3%, 5%), 기포율(30%, 50%, 70%)에 따른 기포 콘크리트의 물리·역학적 특성 및 열적 특성을 검토하여 에너지 절감을 위한 단열재로서의 최적조건을 찾고자 하였다. 실험 결과, 발포율에 영향을 미치는 기포제가 포함된 수용액의 표면장력은 AOS를 사용한 경우가 다른 기포제를 사용한 경우보다 낮게 나타났다. FP는 표면장력의 저하량이 크지 않고 발포율이 낮기 때문에 저농도로 희석한 경우 다량의 수분을 함유하고 있는 안정적이지 못한 기포가 생성되어 3% 이상 사용하여야만 비교적 안정적인 기포를 만드는 것이 가능하였다. 또한, 압축강도와 열전도율은 저밀도 영역에서는 기포제 종류에 따른 차이는 발생하지 않았으나, 상대적으로 고밀도영역에서 압축강도는 AOS와 FP, 열전도율은 VS와 FP가 더 효과적인 것으로 나타났다. 또한, 기포농도와 기포율이 증가할수록 공극 크기는 커지며 열린공극을 형성하는 것으로 나타났으며 모든 기포제에 대한 열전도율은 KS기준을 만족하여 우수한 단열재로서의 가능성을 보였다. 종합적인 분석 결과, FP를 농도 3%로 사용하여 제조한 시험체가 건물에 적용시 기포 콘크리트 단열패널로서 가장 우수한 성능을 발현할 것으로 판단된다.

• 한국디지털건축인테리어학회논문집
• /
• 제12권1호
• /
• pp.81-88
• /
• 2012

According to the survey results of the Ministry of Land, Transport and Maritime Affairs in the end of December 2011, the residential buildings was reported as 67.3% of 4,529,464 buildings. Reflected in the national energy policy, the residential building is expected that greater energy savings. To have realized the Passive House Project used the Autoclaved Lightweight Concrete(ALC) material on exterior wall, we take advantage of a very large energy savings. Therefore, this study investigate the patent documents of three major companies, SUMITOMO, CLION, ASAHI KASEI, in Japan. and analyze technical flow and benchmarking patent. As a result, the Sliding method or the Rocking method of ALC panels how to install is to be superior to high-performance drift and safety by a earthquake. And the embedded anchor in panel needs to improve the shape and the strength of bearing. Thus installation technology of the ALC exterior wall investigated in japanese patent documents is expected to the fastening units and anchors.

• 한국디지털건축인테리어학회논문집
• /
• 제11권3호
• /
• pp.35-42
• /
• 2011

The exterior system of buildings, which is the typical curtain wall, has been made with glass and metal. Theses materials, however, have weaknesses such as inadequate insulating quality, short durability, combustibility and toxic substance. On the other hand, Autoclaved Aerated Concrete(AAC) or Autoclaved Lightweight Concrete(ALC) possess the great energy efficiency and the superb insulating quality as substitute of existing exterior system materials. In this research, strength characteristics and bubble dispersion of hydrothermal synthesis process of AAC based on CaO/$SiO_2$(C/S) ratio are analyzed. C/S ratio is determinated and bubble distribution and compressive strength are studied through the test of varied water-to-solid mineral ratio(W/S). In hydrothermal synthesis program, final C/S ratio is determined as 0.7 consider of the manufacturing process and hydrothermal synthesis is done at $180^{\circ}C$ for 7 hours. The analysis shows slurry has about 2,300cP viscosity and 0.56 specific gravity therefore it is expected AAC has the appropriate facility in the manufacturing process and Hydrates of AAC's Expansion.

• 한국디지털건축인테리어학회논문집
• /
• 제11권4호
• /
• pp.21-27
• /
• 2011

These materials in architecturally glass or metal have weaknesses such as inadequate insulating quality, combustibility and toxic gases in fires substance. However, Autoclaved Lightweight Concrete(ALC) has excellent thermal insulation properties and seem to possess the superb insulating quality as substitute of existing exterior materials. This research is to compare experimentally to the kind of the strength properties of ALC materials which mixed with blast furnace slag pounder and silica fume. For the purpose of increasing the strength, the plastic states of ALC evaluate the physical characteristics as microstructure and strength according to various specific gravity. According to the quicklime quantity the compressive strength is proportionate depend on the absolute dried specific gravity. When not putting in 10% quicklime, the compressive strength appeared most lowly with 14.0MPa. When putting in the quicklime, the strength appeared higher with 15.1MPa. And strength of specimen containing 2.25% silica fume is 15.6MPa increased 10.3% than reference specimen 14.0MPa.