• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.603-620
• /
• 2021

A land nodal seismic system was employed to acquire seismic reflection data using stand-alone cable-free receivers in a land-river area. Acquiring reliable data using this technology is very cost effective, as it avoids topographic problems in the deployment and collection of receivers. The land nodal airgun system deployed on the mouth of the Hyungsan River (in Pohang, Gyeongsangbuk Province) used airgun sources in the river and receivers on the riverbank, with subparallel source and receiver lines, approximately 120 m-spaced. Seismic data collected on the riverbank are characterized by a low signal-to-noise (S/N) and inconsistent reflection events. Most of the events are represented by hyperbola in the field records, including direct waves, guided waves, air waves, and Scholte surface waves, in contrast to the straight lines in the data collected conventionally where source and receiver lines are coincident. The processing strategy included enhancing the signal behind the low-frequency large-amplitude noise with a cascaded application of bandpass and f-k filters for the attenuation of air waves. Static time delays caused by the cross-offset distance between sources and receivers are corrected, with a focus on mapping the shallow reflections obscured by guided wave and air wave noise. A new time-distance equation and curve for direct and air waves are suggested for the correction of the static time delay caused by the cross-offset between source and receiver. Investigation of the minimum cross-offset gathers shows well-aligned shallow reflections around 200 ms after time-shift correction. This time-delay static correction based on the direct wave is found essential to improving the data from parallel source and receiver lines. Data acquisition and processing strategies developed in this study for land nodal airgun seismic systems will be readily applicable to seismic data from land-sea areas when high-resolution signal data becomes available in the future for investigation of shallow gas reservoirs, faults, and engineering designs for the development of coastal areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.815-824
• /
• 2022

Among the main facilities of the power plant, the circulating water used for cooling the power generation system is supplied through the Circulation Water Intake Basin (CWIB). The vortexes of various types generated in the Pump Sump (PS) of CWIB adversely affect the Circulation Water Pump (CWP) and pipelines. In particular, the free surface vortex accompanied by air intake brings about vibration, noise, cavitation etc. and these are the causes of degradation of CWP performance, damage to pipelines. Then power generation is interrupted by the causes. Therefore, it is necessary to investigate the hydraulic characteristics of CWIB through the hydraulic model experiment and apply an appropriate Anti Vortex Device (AVD) that can control the vortex to enable smooth operation of the power plant. In general, free surface vortex is controlled by Curtain Wall (CW) and the submerged vortex is by the anti vortex device of the curtain wall. The detailed specifications are described in the American National Standard for Pump Intake Design. In this study, the circulating water intake part of the Tripoli West 4×350 MW power plant in Libya was targeted, the actual operating conditions were applied, and the vortex reduction effect of the anti vortex device generated in the suction tank among the circulating water intake part was analyzed through a hydraulic model experiment. In addition, a floor splitter was basically applied to control the submerged vortex, and a new type of column curtain wall was additionally applied to control the vortex generated on the free surface to confirm the effect. As a result of analyzing the hydraulic characteristics by additionally applying the newly developed Column Curtain Wall (CCW) to the existing curtain wall, we have found that the vortex was controlled by forming a uniform flow. In addition, the vortex angle generated in the circulating water pump pipeline was 5° or less, which is the design standard of ANSI/HI 9.8, confirming the stability of the flow.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.2
• /
• pp.1-22
• /
• 2022

The modification effects of street trees on outdoor thermal comfort in summertime according to tree planting types and road direction were analyzed using a computer simulation program, ENVI-met. With trees, the air temperature and wind speed decreased, and the relative humidity increased. In the case of mean radiant temperature (T_mrt) and human thermal sensation, physiological equivalent temperature (PET) and universal thermal climate index (UTCI), there was a decrease during the daytime. The greatest change among the meteorological factors by trees happened in Tmrt, and PET and UTCI showed similar patterns with T_mrt·The most effective tree planting type on thermal comfort modification was low tree height, wide tree crown, high leaf area index, and narrow planting interval (LWDN). T_mrt, PET and UTCI showed a large difference depending on shadow patterns of buildings and trees according to solar altitude and azimuth angles, and building locations. When the building shade areas increased, the thermal modification effect by trees decreased. In particular, results on the east and west sidewalks showed a large deviation over time. When applying the LWDN, the northwest, west and southwest sidewalks showed a significant reduction of 8.6-12.3℃ PET and 4.2-4.5℃ UTCI at 10:00, and the northeast, east and southeast sidewalks showed 8.1-11.8℃ PET and 4.4-5.0℃ UTCI at 16:00. On the other hand, when the least effective type (high tree height, narrow tree crown, low leaf area index, and wide planting interval) was applied, the maximum reduction was up to 1.8℃ PET and 0.9℃ UTCI on the eastern sidewalks, and up to 3.0℃ PET and 0.9℃ UTCI on the western ones. In addition, the difference in modification effects on T_mrt, PET and UTCI between the tree planting types was not significant when the tree effects were reduced by the effects of buildings. These results can be used as basic data to make the most appropriate street tree planting model for thermal comfort improvement in urban areas in summer.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.485-496
• /
• 2022

Modern agriculture is being transformed into smart agriculture to maximize production efficiency along with changes in the 4th industrial revolution. However, rural areas in Korea are facing challenges of aging, low fertility, and population outflow, making it difficult to transition to smart agriculture. Among ICT technologies, simulation allows users to observe or experience the results of their choices through imitation or reproduction of reality. The combination of the three-dimension (3D) model and the greenhouse simulator enable a 3D experience by virtual greenhouse for fruits and vegetable cultivation. At the same time, it is possible to visualize the greenhouse under various cultivation or climate conditions. The objective of this study is to apply the greenhouse climate management model for simulation development that can visually see the state of the greenhouse environment under various micrometeorological properties. The numerical solution with the mathematical model provided a dynamic change in the greenhouse environment for a particular greenhouse design. Light intensity, crop transpiration, heating load, ventilation rate, the optimal amount of CO₂ enrichment, and daily light integral were calculated with the simulation. The results of this study are being built so that users can be linked through a web page, and software will be designed to reflect the characteristics of cladding materials and greenhouses, cultivation types, and the condition of environmental control facilities for customized environmental control. In addition, environmental information obtained from external meteorological data, as well as recommended standards and set points for each growth stage based on experiments and research, will be provided as optimal environmental factors. This simulation can help growers, students, and researchers to understand the ICT technologies and the changes in the greenhouse microclimate according to the growing conditions.

• Korean Journal of Food Science and Technology
• /
• v.54 no.4
• /
• pp.377-385
• /
• 2022

This study examined the dietary fiber content of potato and physicochemical characteristics of potato starch isolated from various cultivars. The total dietary fiber content of the Arirang1ho cultivar was 6.30%, which was higher than that of other cultivars. The amylose content ranged from 36.76-55.75%, with Sooseon having the highest amylose content. Analysis of the degree of amylopectin polymerization revealed that all cultivars had a high proportion of DP (degree of polymerization) 13-24. The phosphate content ranged from 45.90-84.23 mg/100 g, with Arirang1ho having the highest and Eunseon having the lowest phosphate content. The resistant starch content ranged from 58.94-79.87%. Geumseon showed the highest breakdown in the range of 587.45-1,129.72 RVU (rapid viscosity unit). Sooseon had the lowest gelatinization enthalpy value for potato starch in the range of 5.54-7.64 J/g. These results provide basic data for the use of potatoes in industrial applications.

• Korean Journal of Plant Resources
• /
• v.35 no.4
• /
• pp.435-444
• /
• 2022

Hibiscus hamabo Sieb. et Zucc. (yellow hibiscus) is a deciduous semi-shrub plant and mainly growing in Jeju Island. This is known the unique wild hibiscus genus and classified as an 2nd grade of endangered plant for Korean Red List. In previous studies, properties of germination, ecological, genetical and salt resistance have been reported. In this study, we investigated mass-proliferated adventitious root using bioreactor, antioxidant and whitening effects to conduct functional ingredients. Yellow hibiscus were collected from Gujwa, Jeju by prior permission and they were introduced by explant type and various medium composition after surface sterilization. As a result, seed response rates were evaluated at range of 51.17~51.83%, in terms of comprehensive efficiency of shoot and root formation. In the case of adventitious root propagation condition was confirmed in half strength Murashige and Skoog medium salts, 30 mg/L sucrose, and 2 mg/L indole-3-butyric acid for 8 weeks in 5,000 mL bioreactor. We also compared between relationship with biomass and secondary metabolites accumulation by total phenolics content, the flavonoid content, DPPH free radical scavenging activity and melanin content. The results indicated that adventitious root mass proliferation, antioxidant and whitening effect could develop value of the high-quality cosmeceutical ingredient and further metabolite studies.

• Korean Journal of Plant Resources
• /
• v.36 no.2
• /
• pp.107-121
• /
• 2023

This study analyzed the polyphenol, flavonoid contents, antioxidant activity, anti-aging activity and phenol component contents of Saccharina japonica (SJ), Costaria costata (CC) extracts with hot water, 95% methanol, 95% prethanol for investigating possible utilization of SJ and CC extracts. The result revealed that the SJ and CC methanol extracts showed the highest polyphenol and flavonoid contents, 4.63 mg TAN/g, and 4.19 mg QUE/g respectively. Also, the SJ and CC methanol extracts showed higher antioxidant activity than prethanol and hot water extracts, whereas the ABTS radical scavenging activities were the highest in prethanol extracts (IC₅₀ = 15.4, 10.3 ㎍/µL). In anti-aging activity for evaluating the anti-wrinkle activity and skin whitening activity, the CC methanol extracts had high collagenase inhibitory activity (88.3%), and the SJ prethanol extracts showed higher elastase inhibitory activity (19.0%) compared to other extracts. Then the tyrosinase inhibitory activity was significantly higher in the SJ and CC methanol extracts (41.8, 30.3%, respectively), whereas prethanol extracts were the lowest. To identify the phenol component contents of SJ and CC extracts, 4-hydroxybenzoic acid, naringenin, naringin and nicotinic acid were measured using LC-MS/MS. As a result, the phenol contents were the highest in SJ methanol extract (4-hydroxybenzoic acid), SJ and CC prethanol extract (naringin and naringenin) and CC prethanol extract (nicotinic acid). Lastly, the antioxidant activity of SJ and CC showed high correlations with polyphenol and flavonoid contents (R = -0.946~0.883). These results suggest that prethanol or methanol extracts of SJ and CC have higher antioxidant activities, anti-aging activity and the potential to be used as material for health functional food and cosmetics.

• Korean journal of applied entomology
• /
• v.61 no.3
• /
• pp.423-434
• /
• 2022

The two previously developed artificial diets (N4 and N6) used for rearing Spodoptera frugiperda (Noctuidae) larvae, were selected as highly-fit ones for rearing Mythimna loreyi larvae. Almost all biological characteristics were not significantly different between the colonies reared on the two diets at 25℃ and 15:9 h (light:dark) photoperiod. The developmental periods were 4.9-5.2 days for eggs, and 22.3-23.2 days for larvae. The pupal period and weight were different between the sexes in each diet colony. The pupal periods in females and males showed 12.6-12.8 days and 14.1-14.5 days, respectively. The pupal weights were ca. 345 mg for females and ca. 380 mg for males. The pupation and emergence rates were ca. 91-94%, and ca. 91-95%, respectively, without significant differences between the two colonies. The pre-oviposition and oviposition periods were 3.4 days and 4.7-4.8 days, respectively. The adult longevity was 8.2 days in females and 10.3-12.4 days in males. Total offsprings produced were found to be 724-847 larvae on an average with ca. 1,400 maximum larvae. In the life table analysis, the intrinsic rates of increases (0.1181 for N4 and 0.1253 for N6) were not significantly different between the two colonies. Individual differences in the larval instar number 5 and 6 were found within a diet colony. The ratios of 5-instar larvae were ca. 22% in N4 colony and ca. 7% in N6 colony. The larval period of 6-instar larvae was longer than that of 5-instar larvae. Width of head capsule in larvae varied from ca. 309 ㎛ for 1st instar to ca. 3,065 ㎛ for 6th instar. Body lengths measured from ca. 2.0 mm for 1st instar to ca. 29.1 mm for 6th instar. Larvae of M. loreyi and M. separata were found at the same time in a maize field during June and July, 2020.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.10 no.1
• /
• pp.43-58
• /
• 2008

This research was conducted to determine the alternative tool of chemical spray for rice cultivation using the unmanned helicopter(Yamaha, R-Max Type 2G-remote controlled system) at farmer's field in Korea. The unmanned helicopter tested was introduced form Japan. In Korea the application of chemicals by machine sprayer for pest management in rice cultivation has been ordinarily used at the farmer's level. However, it involved a relatively high cost and laborious for the small scale of cultivation per farm household. Farm population has been highly decreased to 7.5% in 2002 and the population is expected to rapidly reduce by 3.5% in 2012. In Japan, pest control depending on unmanned helicopter has been increased by leaps and bounds. This was due in part to the materialization of the low-cost production technology under agricultural policy and demand environmentally friendly farm products. The practicability of the unmanned helicopter in terms of super efficiency and effectiveness has been proven, and the farmers have understood that the unmanned helicopter is indispensable in the future farming system that they visualized. Also, the unmanned helicopter has been applied to rice, wheat, soybean, vegetables, fruit trees, pine trees for spraying chemicals and/or fertilizers in Japan Effect of disease control by unmanned helicopter was partially approved against rice blast and sheath blight. However, the result was not satisfactory due to the weather conditions and cultural practices. The spray density was also determined in this experiment at 0, 15, 30, and 60cm height from the paddy soil surface and there was 968 spots at 0cm, 1,560 spots at 15cm, 1,923 spots at 30cm, and 2,999 spots at 60cm height. However, no significant difference was found among the treatments. At the same time, there was no phytotoxicity observed under the chemical stray using this unmanned helicopter, nor the rice plant itself was damaged by the wind during the operation.

• Korean Journal of Environmental Biology
• /
• v.40 no.2
• /
• pp.187-198
• /
• 2022

In this study, Telenomus remus Nixon (Hymenoptera: Scelionidae) was first reported as a natural enemy of the fall armyworm Spodoptera frugiperda (J.E. Smith) (Lepidoptera: Noctuidae) egg collected from corn fields in Korea, and its biological characteristics was studied. Based on morphological and molecular analysis, the parasitoid emerged from S. frugiperda eggs was identified as T. remus. We found that T. remus can attack the eggs of S. frugiperda, Spodoptera litra and Spodoptera exigua under a laboratory condition. The longevity of T. remus female adult was longer than that of male adult. The egg-to-adult period of T. remus was not affected by the host age and sex. T. remus female adult laid at least 1-3 eggs a day to a maximum of 37 or more eggs, and the most oviposited on the 3^rd to 4^th day after emergence. The host preference for oviposition of T. remus adult was high in the order of S. litura>S. exigua>S. frugiperda. T. remus preferred to parasitize 1- and 2-day-old host egg rather than 3-day-old host egg. When compared to the sex ratio of T. remus progeny, the rate of female progeny was higher at the initiation time of oviposition, while the proportion of male progeny increased significantly with female adult age, especially after 8-day-old adult. This information may be useful for improving T. remus mass rearing system and developing a biological control program to control S. frugiperda.