• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.195-203
• /
• 2018

This study was conducted to investigate the types and methods of dental impression materials used in dental clinics in south Korea, the questionnaire was surveyed by a self-administered method for one dentist in a one dental clinic, the collected data were statistically analyzed using SPSS 20. The most frequently used addition silicone impression materials were used in most dental treatment. It was confirmed that the method of taking impression materials having different flow properties(light body and heavy body) was most preferred at one time, also, the implant impression taking method was the most preferred for two rubber impression materials with different flow properties, both direct and indirect. There were statistically significant differences in age and clinical experience between the methods of impression taking of casting restorations and prosthetic according to general characteristics. These results are expected to be helpful for the development of theoretical and practical work based on the basic data for impression material development and research and the preference of impression materials required for dental professional in clinical practice.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.26 no.3
• /
• pp.9-20
• /
• 1989

It is important to enhance the safety of ship structures as much as possible in order to prevent the disastrous collapse of structures. In fact, the strength problem of structures is closely related with the safety problem of structures. Recently, the direct calculation method using a rational approach based on the first principle is implemented into the structural design process instead of adopting empirical approach based on the rules. The structural designer have shown increased concern with the problem of adequacy of conventional design method based on the safety factor since it does not fully take into account some degree of variability of the applied loads on and the strength of ship structures. To deal with the analysis of structures effectively, it is necessary to have three stages being equally treated. The first one is load analysis, second one response analysis, third one safety analysis. For marine structures, most of research effort has been however put into the first and second stages. The third stage is normally done by simple procedures. Hence, the various probabilistic methods are compared in order to establish the reliability analysis techniques for ship structures. As a result, the advanced level 2 method is selected as a most effective and accurate reliability method. The validity of this method is further demonstrated by comparing the results with the conventional method for the problem of the longitudinal strength of hull girder of Ro-Ro ship.

• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.89-96
• /
• 2020

Water management agencies under the Ministry of Environment produce and accumulate qualified basic data for major rivers. However, the integrated management of the river water has been weak since the artificial water circulation process, such as the intaking and drainage of agricultural water, has not been examined in the basin, which includes many agricultural land. In this study, a study was conducted on how the power usage method (operating time method) based on the running time can be applied and improved among indirect flow rate measurement methods used to investigate flow rates collected by the riverside for agricultural water purposes, and thus the resultant data of high reliability can be obtained at low cost. The operation time method is suitable for small-scale water pumping stations where it is difficult to secure real-time power supply data. The reliability of the data was verified through the correlation analysis with the actual flow rate, and it was found that the flow rate calculated by the operation time method reflecting the level of the stream to which the inlet of the pumping station is connected can be reasonably matched with the actual flow rate. In addition, it was confirmed that the investment cost at the time of initial installation of the facility was highly efficient by generating qualified flow data at low cost through comparison with direct flow rate measurement methods. If flow data is secured by applying the operation time method to large and small water farms located along the riverside, it is expected that more quantitative and integrated stream water management will be possible.

• Research in Plant Disease
• /
• v.23 no.2
• /
• pp.114-149
• /
• 2017

World-wide crop loss caused by insect pest and nematode reaches critical level. In Korea, similar crop loss has been gradually augmented in the field and greenhouse due to continuous crop rotation. The current methods on controlling herbivorous insects and plant parasitic nematodes are mostly depended on agro-chemicals that have resulted additional side-effect including occurrence of resistant insects and nematodes, environmental contamination, and accumulation in human body. To overcome the pitfalls, microbe-based control method have been introduced and applied for several decades. Here, we revised biological control using by the bacteria, fungi, and virus in order to kill insect and nematode and to attenuate its virulence mechanism. The introduced microbes mainly secreted out the hydrolysing enzymes and toxic compounds to target host membrane or cell wall directly. Indirectly, the microbe-triggered plant innate immunity against insects and nematodes was also reported. In conclusion, we provide a new frontier of microbe-based environmentally friendly procedure and effective methods to manage insects and nematodes.

• Journal of Legislation Research
• /
• no.44
• /
• pp.315-342
• /
• 2013

Die Rechtsschutzversicherung ist als eine echte Schadenversicherung eine neue Versicherung, die $Spezialit{\ddot{a}}t$ des versichertes Risikos hat. Das bedeutet, dass der Rechtschutzversicherer nur bestimmte vertraglich vereinbarte Risiken $tr{\ddot{a}}gt$. Diese Risiken sind in den Allgemeinen Bedingungen $f{\ddot{u}}r$ die Rechtsschutzversicheurng (ARB) im Zusammenhang mit Versicherungsvertragsgesetz (VVG) ${\S}$ 125 exact beschrieben. VVG ${\S}$ 125 spricht allegemein von Leistung des Versicherers im vereinbarten versicherten Umfang. Entscheidend ist also die Vereinbarung in den ARB, welche in ${\S}$ 1 die Kostentragung $f{\ddot{u}}r$ den Versicherten als Hauptleistung des Versicherers beschrieben ist. Also in den VVG ${\S}{\S}$ 125 bis 129 gibt es keine Definition ${\ddot{u}}ber$ die Sparte der Rechtsschutzversicherung, jedoch mindestens es $w{\ddot{a}}re$ $m{\ddot{o}}glich$, diese Sparte zu definieren. Um die $k{\ddot{u}}nftige$ Produktentwicklung nicht zu hindern, $enth{\ddot{a}}lt$ die Vorschrift keine gesetzliche Definition der Rechtsschutzversicherung nach Angabe der amtlichen $Begr{\ddot{u}}ndung$. Weil in Korea die Rechtsschutzversicherung relativ neu in Versicherungsmarket ist, sind daher VVG ${\S}{\S}$ 125 ein gutes gesetzgeberisches Vorbild, um pragmatisch und auch dazu rechtswissenschaftlich zu diskutieren und diese fsetzustellen. Im Schritt von Ausdehnungen der juristischen Dienstleistung $w{\ddot{a}}re$ es $n{\ddot{o}}tig$, zu betrachten, wie Leistungsumfang des Versicherers in der Rechtsschutzversicherung erweitert werden kann. And noch dazu ist die Informationspflicht des Versicherers in Hinsicht auf Versicherungsunfall und Leistungsumfang noch weitert zu ${\ddot{u}}berlegen$, weil diese Sparte der Rechtsschutzversicherung noch professioneller als die anderen Versicherungsbereiche ist.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.265-266
• /
• 2012

의료용 X-ray의 발전에 따라, 영상의 Digital화가 필요하게 되었다. Digital 영상 구현을 위해 다양한 형태의 영상 검출기가 개발되었다. 진단 영상의 조건으로는 구현 시간이 빠르고 해상도가 높아야 한다. 조건에 부합하는 Flat panel 형태의 직접방식과 간접방식 검출기의 개발이 주로 이루어졌으며, X-ray 검출 효율이 높고 공간 분해능이 높은 직접 방식의 검출기에 대한 연구가 활발히 진행되고 있다. 기존 직접방식의 X-ray 검출물질로는 A-Se이 이용되었다. 하지만 A-Se의 경우 낮은 원자번호로 인해 X-ray에 대한효율이 낮으며, 제조 공정과 수율의 문제로 인해 대체 물질의 개발과 공정의 개선이 필요하다. 선행 연구를 통해 X-ray 검출물질의 전기적 특성을 파악을 통해 대체 물질로서 가능성을 알아보았다. 본 연구에서는 기존에 제작된 X-ray 검출물질의 상부전극 증착 물질과 증착법 선정에 대한 연구이다. 선행 연구를 통해 선정된 X-ray 검출물질은 HgI2이다. 상, 하부 전극 선택에 있어 HgI2의 일함수 값(4.15eV)을 고려하여 그와 비슷한 일함수 값을 가진 물질로 전기적 장벽을 제거하여야 한다. 따라서, ITO (일함수 4.45eV)와 Au (일함수 5.1eV)을 선택하였다. ITO의 증착으로 이용된 방법으로는 on-axis 형태의 magnetron plasma sputtering을 이용하였으며, Au의 증착으로 이용된 방법은 Thermal evaporation deposition을 이용하였다. plasma sputtering에 이용된 타겟은 In2O3;SnO2 (조성비:90:10wt%)를 사용하였으며, Chamber의 크기는 넓이 456 ${\phi}cm^2$ 높이 25 cm이며, 로 target과 기판과의 거리는 15cm이다. plasma발생에 필요한 가스로는 Ar과 O2를 이용하였다. 고 진공 환경 조성에 이용된 장비로는 Rotary pump와 Turbo molecular pump이다. plasma 발생 전 진공도는 $3.2{\times}10^{-5}$ Torr, 발생 후 진공도는 $5.1{\times}10^{-5}$ Torr이다. plasma 환경이 조성된 후 증착 시간은 1분 30초이다. Au는 순도 99.999%를 이용하였으며, 이용된 금은 1회 증착에 0.3 g을 이용하였다. Chamber의 넓이 1,444 ${\phi}cm^2$이며, 높이 40 cm, boat와 기판과의 거리는 25 cm이다. 고 진공 환경 조성에 이용된 장비로는 Rotary pump와 diffusion pump를 이용하였다. Au의 승화 전 진공도는 $2.4{\times}10^{-5}$ Torr 증착 시 진공도는 $4.2{\times}10^{-5}$ Torr이며, Boat에 가해준 전압, 전류는 0.97 V, 47 A이며, 증착 시간은 1분 30초이다. 광도전체 층에 각각 증착된 전극의 저항을 통해 증착상태를 판단하였다. DMM (Digital Multimeter)로 1 cm 간격으로 측정된 표면의 저항은 ITO 약 $8{\Omega}$, Au 약 $3{\Omega}$으로 전극으로서 이용이 가능한 상태이다. Au와 ITO가 증착된 HgI2 시편의 전기적 특성은 기존에 이용된 X-ray 변환물질의 성능보다 우수하였다. 하지만 Au와 ITO가 각각 증착된 시편의 전기적 특성은 큰 차이를 보이지 않았다. ITO의 경우 진공 상태에서 이용되는 Gas가 이용되며, Plasma 환경 조성 유지가 어려운 점이 있다. Au전극은 증착 환경 조성이 쉽지만, 전극 물질 이용효율이 떨어지는 단점이 있다. 본 연구를 통해 X-ray 변환물질인 HgI2의 전극물질로 Au와 ITO의 이용가능성을 알아보았다. 두 전극으로 제작된 검출기의 성능은 큰 차이 없이 우수하였고, 전기적 장벽 상태가 낮아 높은 검출 효율을 보였다. 상대적으로 Au 전극의 공정이 간단하고 수율이 높다. 하지만 Au Source의 이용 효율이 떨어지는 단점이 있다. 본 연구의 결과를 통해 공정상의 유리함과 Source의 이용효율을 고려한 분석에 대한 연구가 필요할 것으로 사료된다.

• Journal of dental hygiene science
• /
• v.14 no.3
• /
• pp.424-432
• /
• 2014

The purpose of study is to understand the relation with factors which affect the mental health and to investigate self-esteem, department satisfaction and career stress among dental hygiene students. The study performs self-administered questionnaires survey from March to May, 2013, among dental hygiene students of college in Busan and Ulsan with the convenience sampling and finally analyzes 376 questionnaires. The study performs the path analysis to analyze the impact of the mental health on self-esteem, department satisfaction and career stress and the correlation among these variables. The analysis result shows that the self-esteem most affects and the direct effect on the mental health. The factor which affects the self-esteem is the department satisfaction show direct effect, also career stress has direct and indirect effect. Self-esteem is important factors in the department satisfaction, career stress and mental health. Thus, a stable mental health for students and groups of individuals who need to take advantage of professional counseling and career exploration program structured should be configured.

• Journal of the Korean Chemical Society
• /
• v.64 no.5
• /
• pp.304-317
• /
• 2020

This study was conducted on four 11^th grade students at a high school in a small town to determine the effectiveness of responsive teaching. The three phases of the responsive teaching method proposed in the previous study were subdivided into six stages; Step 1 is elicitation of students' thoughts related to macroscopic world, Step 2 is drawing of students' early thoughts related to microscopic world, Step 3 is disciplinary connections with ideas of the particle, Step 4 is to clarify the learner's thoughts on the particle by the teacher's involvement, Step 5 is deepening students' thoughts, and Step 6 is expanding ideas. In Step 4, students came to the recognition that the cause of mass was atoms and that the cause of volume was molecules. In Step 5, students led to a shift in thinking that could ignore the volume of the molecules themselves through the properties of protons and neutrons that affect mass from a particle perspective. In the Step 6 of expanding ideas, students explained molecular motion by the concept of material point which ignores the volume of particles. This steps gave students perspectives on the relationship between the mass and volume of particles required by Avogadro's law. The students recognized that some systems could be studied only indirectly because they were too small, too large, too fast, or too slow to observe directly.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.228-240
• /
• 2022

A comprehensive safety management system will be required in accordance with the implementation of the Major Disaster Punishment Act for close-up safety management of construction sites. Safety management level evaluation management requires a comprehensive relationship between safety management under the Construction Technology Promotion Act and health and health management system under the Industrial Safety and Health Act. Purpose: Safety under the Serious Accidents Punishment Act. The ultimate goal is to study the comprehensive analysis and relationship of health management and to improve the safety evaluation level of health and health management. Methods: The feasibility of the questionnaire was confirmed through the second Delphi analysis of construction site experts and safety managers, and the regression coefficient and path analysis of potential variants in safety management, safety management, health management and safety inspection were confirmed. Result and Conclusion: In the structural model, the regression coefficient (89%) from safety management, health system, and safety management to safety inspection execution and lambda values of appropriate observation variables were confirmed. In the path analysis, the total effect (.809) was confirmed by mediating health hygiene in the relationship between health plan establishment adequacy and post-inspection management, and the path coefficient (.82) of temporary structure safety was confirmed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.3
• /
• pp.195-202
• /
• 2007

The normalized difference in incident solar energy between a target surface and a level surface (overheating index, OHI) is useful in eliminating estimation error of site-specific maximum temperature in complex terrain. Due to the complexity in its calculation, however, an empirical proxy variable called northern exposure index (NEI) which combines slope and aspect has been used to estimate OHI based on empirical relationships between the two. An experiment with real-world landscape and temperature data was carried out to evaluate performance of the NEI - derived OHI (N-OHI) in reduction of spatial interpolation error for daily maximum temperature compared with that by the original OHI. We collected daily maximum temperature data from 7 sites in a mountainous watershed with a $149 km^2$ area and a 795m elevation range ($651{\sim}1,445m$) in Pyongchang, Kangwon province. Northern exposure index was calculated for the entire 166,050 grid cells constituting the watershed based on a 30-m digital elevation model. Daily OHI was calculated for the same watershed ana regressed to the variation of NEI. The regression equations were used to estimate N-OHI for 15th of each month. Deviations in daily maximum temperature at 7 sites from those measured at the nearby synoptic station were calculated from June 2006 to February 2007 and regressed to the N-OHI. The same procedure was repeated with the original OHI values. The ratio sum of square errors contributable by the N-OHI were 0.46 (winter), 0.24 (fall), and 0.01 (summer), while those by the original OHI were 0.52, 0.37 and 0.15, respectively.