• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.2
• /
• pp.217-229
• /
• 2000

Adsorption equilibrium experiments for the phenol on granular activated carbon(16~25 mesh) and powder activated carbon(325 mesh) were carried out at $25{\pm}1^{\circ}C$ and the results were expressed with Freundlich isotherm. Adsorption rate experiments were executed in batch adsorption system under the condition that can be neglecting mass transfer resistance at the external surface of the particle. The results were analysed with the Miller's method to evaluate the linear driving force(LDF) adsorption rate constant. Fixed bed adsorption experiments were performed by adopting different flow rates in the activated carbon-phenol system at $25{\pm}1^{\circ}C$. The theoretical breakthrough curves were estimated with the simple constant pattern solution. The adsorption rate constant of LDF model was not a fixed value but variable with adsorption amount. The experimental results were better agreed with the estimation of breakthrough curve using the variable adsorption rate constant than the results estimated using the average fixed adsorption rate constant.

• Industry Promotion Research
• /
• v.7 no.2
• /
• pp.51-58
• /
• 2022

This study is based on Freud's psychoanalysis and intends to deal with the actual psychoanalytic counseling applied to it. In particular, I would like to study the counseling process and counseling techniques. The research results are as follows. The counseling process goes through four stages: initiation, transfer development, training, and transfer resolution as follows after selecting a client and constructing a counseling situation. In the beginning phase, the client listens to important past histories. In the metastasis development stage, it is from the time when metastasis appears. The training phase is the phase in which the client's insight is translated into real life to bring about change. The transfer resolution stage is the period when transfer analysis and interpretation are completed. Counseling techniques include free association, empathy, resistance, transference and countertransference, and interpretation. Free association is a key technique in psychoanalytic therapy and plays an important role in maintaining the analytical framework. Empathy is the ability of the therapist to identify herself with the client and the ability of the therapist to convey the empathic experience to the client itself is a key mechanism for change. Resistance refers to any behavior in which the client does not cooperate with counseling. Transference and countertransference are the main techniques of psychoanalysis. This is because the psychoanalyst induces and resolves the transference of the client during the treatment process. Interpretation refers to the technique of responding verbally in order to understand the needs, meanings, and motives hidden behind the client's thoughts, feelings, and actions. In conclusion, the counseling process of psychoanalytic counseling refers to the purpose of effective counseling by selecting a client and constructing a counseling situation. In addition, the principles of psychoanalysis in counseling techniques are applied to treatment procedures that vary according to the nature of the case, and can be variably applied while treating the same client.

• Composites Research
• /
• v.19 no.5
• /
• pp.20-27
• /
• 2006

Self-sensing and interfacial evaluation of Ni nanowire/polymer composites were investigated using electro-macromechanical technique, which can be used fur a feasible sensing measurement on tensile and compressive loading/consequent unloading, temperature, and humidity. Mechanical properties of Ni nanowire with different aspect ratio and adding contents in either epoxy or silicone composites were measured indirectly using electro-pullout test under uniform and non-uniform cyclic loadings. Comparing apparent modulus with the conventional mechanical tensile modulus of Ni nanowire/epoxy composites, the trends were consistent with each other. Ni nanowire/epoxy composites showed the sensing response on humidity and temperature. Self-sensing on applied tensile and compressive loading/unloading was also responded for Ni nanowire/silicone composites via electrical contact resistivity showing the opposite trend between tension and compression. It can be due to the different electrically-interconnecting mechanisms of dispersed Ni nanowires embedded in silicone matrix.

• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.2
• /
• pp.61-69
• /
• 2003

In this paper, we developed the U parameter test system which inspects the property of DC parameter for semiconductor products. The developed system is interfaced by IBM-PC. It is consisted of CPLD part, ADC (Analogue to Digital Converter), DAC (Digital to Analogue Converter), voltage/current source, variable resistor and measurement part. In the proposed system, we have designed the constant voltage source and the constant current source in a part. The CPLD part is designed by VHBL, which it generates the control and converts the serial data to parallel data. The proposed system has two test channels and it operates VFCS mode and CFVS mode. The range of test voltage is from 0[V] to 100[V], and the range of test current is from 0[mA] to 100[mA)]. The diode is tested. The test results have a good performance.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.11a
• /
• pp.45-45
• /
• 2001

종이 표변에 전분 사이징을 하는 목적은 종이가 액체에 대하여 침투저항성을 부여하 여 종이의 인쇄적성을 향상시키며 아울랴 종이의 표면적성과 종이강도 등의 물리적 특 성을 향상시키기 위해서 사용된다. 표면 사이징은 기본적으로 종이 표면에 전분을 이용 한 필름을 형성하여 종이 표면의 공극크기를 줄여 인쇄잉크 등과 같은 액체의 침투속 도를 늦여준다. 현재 국내에서 널리 사용되는 표면 사이징용 전분으로는 산화전분과 자 가변성용 일반전분이 있다. 자가변성용 전분은 효소나 APS로 전분의 chain 길이를 적 당한 점도로 잘라주는 것으로 전분 호액의 노화가 쉽게 일어나는 경향이 있다. 산화전 분은 전분회사에서 산화제를 이용하여 전분의 점도를 사용자의 요구에 따라 조절한 것 으로 water holdout이 개선되고 자가변성용 전분보다는 노화 안정성이 개선되지만 종 이 내부로의 칩투가 많이 일어나 전분 필름 강도가 약해지며 표면 강도 향상 효과가 적고 종이의 광학적 특성을 저하시키는 단점을 지니고 있다. 또한 약 10 ~ 20% 정도 사 용되는 파지의 재활용시 펄프 섬유에 흡착되지 않는 전분으로 인해 백수 내의 COD 및 B BOD를 증가시키는 원인이 된다.따라서 본 연구에서는 펄프 섬유와 친화력이 높아 지료 내첨용 지력증강제로 널리 사용되고 있는 양성 전분의 양이온 치환도 및 점도를 사이즈 프레스에 적합하게 조절 하여 백상지 제조업체의 라언에 적용하였다. 결과분석 항목으로는 파지 재활용에 따른 백수내 COD, 칼숨 이온함량 등의 백수 시스템의 변화와 종이의 물리적, 광학적 특성 및 ink jet 용지의 인쇄적성 등을 측정하여 산화전분과 비교하였다. 그 결과 약 20%의 C COD 감소 효과와 10%정도의 OPR 향상 효과를 얻을 수 있었다. 종이 물성의 경우 인 장강도와 뺏뺏이(stiffness) 및 지분 등을 측정한 결과 산화전분 보다 향상되었다. 특히 지분의 경우, 참여한 회사의 지분관련 complain이 약 80% 정도 감소하는 결과를 나타 내었다. 또한 백상지의 경우 ink jet 프린터에 많이 사용됨으로 ink jet 프린터의 인쇄 적성을 image analyzer로 측정한 결과 산화전분 보다 향상된 결과를 나타내었다.

• Journal of Advanced Navigation Technology
• /
• v.13 no.3
• /
• pp.399-405
• /
• 2009

This paper proposes a design of attenuator based on meta-material structure and its application. The unit-cell attenuator based on the lossy transmission line consists of the CRLH(Composite Right/Left Handed) transmission line and PIN diodes to be controlled internal loss according to diode bias voltage to change resistance of diode. Also, to reduce the initial losses, there is used parallel connection of PIN diodes. To increase attenuations, it is connected a cascade unit-cell of attenuator with periodic structure. The attenuation quantities of unit-cell are about 10dB and phase variations are 15o maximum at 1.5 GHz ~ 2.5 GHz. Also, its application is represented a vector modulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.3
• /
• pp.172-178
• /
• 1986

The recent interest in the design of filters is motivatied by the fact that such filter can be fully integrated using standard metal-oxide-semiconductor processing technology. This is due to replacing all the resistors in the active RC filter network by the switched capacitors. The voltage gain of a SC filter depends only on the rations of capacitance and these ratios can be obtained and maintained to high accuracy. Therefore, it is known that a switched capacitor is much better than a resistor in temperature and linearity characteristics. This paper proposed a programmable SC filter and proved the fact that ${omega}_0$ Q and G of this circuit can be controlled by digital signal. Experiments show that SC filter remains the low sensitivities but it can't avoid little influence of parasitic capacitance. As the transfer characteristic of the SC filter is varied with sampling frequency and resistor array, SC filtering technigue can be applied for digital processing, speech analysis and synthesis and so on.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.179-184
• /
• 2016

The electrical load testing system developed from this study was designed to control rated-capacity-testing or variable-load-testing in an active and precise manner and save electric energy during testing, and also to convert the saved electric energy through the electrical load testing system to grid line. As for the device under testing, it was designed to be applied to not only transformer, rectifier, voltage regulator, inverter which require grid voltage source but, also applied to electric power, aerogenerator, photovoltaic, hybrid generator, battery, etc. which do not require grid voltage source. The system was designed to return the power consumed during the testing to the grid line by connecting the synchronizing pwm inverter circuit to the grid voltage source, and was also made to enable the being-tested system from disuse of approximately 93.4% energy when compared to the conventional load testing system which has used the passive resistor.

• Transactions of the KSME C: Technology and Education
• /
• v.2 no.1
• /
• pp.1-8
• /
• 2014

Recently vehicle development trend changes from machinery vehicle to the electrical and electronic devices. As well the electrical and electronic devices commercial vehicles are increasing more than machinery system. The capacitance fuel sensor is a sensor that, by measuring the capacitance value of fuel level sensor MCU operating for the final voltage value of the signal output. That is increasing durability and fuel measurement accuracy more than conventional ceramic resistor type. For Sensor software verification R-BENCH TOOL generated test case automatically. We make the programmable Capacitor board for test. And it was confirmed that more than 98% of the high reliability of the software.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1455-1462
• /
• 2012

In this paper, a BCD process based high-reliability 24-bit dual-port eFuse OTP Memory for PMICs is designed. We propose a comparison circuit at program-verify-read mode to test that the program datum is correct by using a dynamic pseudo NMOS logic circuit. The comparison result of the program datum with its read datum is outputted to PFb (pass fail bar) pin. Thus, the normal operation of the designed OTP memory can be verified easily by checking the PFb pin. Also we propose a sensing margin test circuit with a variable pull-up load out of consideration for resistance variations of programmed eFuse at program-verify-read mode. We design a 24-bit eFuse OTP memory which uses Magnachip's $0.35{\mu}m$ BCD process, and the layout size is $289.9{\mu}m{\times}163.65{\mu}m$ ($=0.0475mm^2$).