• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.506-513
• /
• 2021

The durability and safety of reinforced concrete structures significantly depend on the reinforcement conditions, concrete cover thickness, cracks, and concrete strength. There are two ways to accurately determine the information on reinforcing bars embedded in concrete - the local destructive method and the non-destructive rebar detection test. In general, the non-destructive rebar detection tests, such as the electromagnetic wave radar method, electromagnetic induction method, and radiation method, are adopted to avoid damage to the structural elements. The moisture content and temperature of concrete affect the dielectric constant, which is the electrical property of concrete, and cause interference in the non-destructive rebar detection test results. Therefore, in this study, the effects of the electromagnetic wave radar method and electromagnetic induction method have been analyzed according to the temperature and surface moisture content of concrete. Due to the technological advancement and development of equipment, the average error rate was less than 5% in the specimens at 24℃, irrespective of their operating principles. Among the tested methods, the electromagnetic induction method showed very high accuracy. The electromagnetic wave radar method indicated a relatively small error rate in the dry state than in the wet state, and exhibited a relatively high error rate at high temperatures. It was confirmed that the error could be reduced by applying the electromagnetic wave radar method when the temperature of the probe was low and in a dry state, and by using the electromagnetic induction method when the probe was in a wet state or at a high temperature.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.492-498
• /
• 2021

In this paper, the electromagnetic wave transmittance of the reinforced concrete structure wall was analyzed using the performance measurement system of electromagnetic wave shielding. Recently, electromagnetic wave shielding technologies on the reinforced concrete wall conditions have been studied, and the shielding effectiveness have been tested on unit cell size. However, the unit cell size tests have problems on that the measurement range for shielding performance is insufficient and it is difficult to reflect the real conditions of the concrete wall. Therefore, we constructed a shielding performance measurement system using a large sample of 2.2m × 2.2m like a real wall. To verify the measurement system, general reinforced concrete test samples were selected, and real shielding performance measurements and numerical analysis were proceeded. Test and numerical analysis results showed similar tendencies in the evaluation frequency range of 75MHz to 2GHz. Thus we validated the effectiveness of this shielding performance measurement system.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.58-65
• /
• 2004

This study was performed to investigate the protease activity from fruit body of Sarcodon aspratus and its features. The specific protease activity was increased with the increasing purification steps, 2.62 times by desalting, 17 times by CMC column chromatography, 113.8 times by DEAE-Sephadex A-50 column chromatography, and 728.3 times by Sephadex G-75 column chromatography. Proteases were identified as two different enzymes having different isoelectric points at pH 4.35 (its recovery rate 8%) and pH 4.7 (its recovery rate 3.5%). Those proteases were purified by 3,025 folds and 3,257 folds in terms of specific activity. Two proteases having different isoelectric points had similar enzymatic properties. This protease was estimated to be 43,000 daltons of molecular weights by SDS-PAGE. This protease with optimum pH 4 was almost stable in the pH range of 4~7. Optimal temperature of protease activity was 40 to 50℃, and the protease activity was completely inhibited at 70℃ for 30 min.

• Korean Journal of Ichthyology
• /
• v.34 no.1
• /
• pp.25-33
• /
• 2022

We investigated to elucidate the early life history of siberian stone loach, Barbatula nuda (Pisces: Nemacheilidae). Adult fish were collected using net in the Sangcheoncheon Stream, Cheongpyeong-myeon, Gapyeong-gun, Gyeonggi-do, Korea, 26th April 2020. HCG 10 IU/g was injected to female and male fish and fertilized by dry method in the laboratory. The number of eggs of B. nuda was 1,308±293 (TL: 70.64~79.24 mm), and the egg color was yellowish grey. Fertilized eggs measured 1.13±0.01 mm (n=10) in diameter and showed adhesion. The fertilized eggs started hatching after 104 hours. At the time of egg development, the 15℃ group showed an average hatching rate of 80.1±1.2% and the 20℃ group showed 61.5±6.8%, so the 15℃ group was suitable (p<0.05). Newly hatched larva an average were 3.12±0.06 mm (n=10) in total length. At 4 days after hatching, the total length was 4.89±0.09 mm (n=10), and feeding began with the mouth and anus opened, and entered to preflexion larvae stage. At 21 days after hatching, the total length was 10.98±0.40 mm (n=10), and the distal part of the notochord was bent to 45°, and entered to postflexion larvae stage At 26 days after hatching, the total length was 13.47±0.37 mm (n=10), and entered the juvenile stage.

• Journal of Electrochemical Science and Technology
• /
• v.13 no.1
• /
• pp.148-158
• /
• 2022

The electrochemical CO₂ reduction (ECR) to produce value-added fuels and chemicals using clean energy sources (like solar and wind) is a promising technology to neutralize the carbon cycle and reproduce the fuels. Presently, the ECR has been the most attractive route to produce carbon-building blocks that have growing global production and high market demand. The electrochemical CO₂ reduction could be extensively implemented if it produces valuable products at those costs which are financially competitive with the present market prices. Herein, the electrochemical conversion of CO₂ obtained from flue gases of a power plant to produce diesel and formic acid using a consistent techno-economic approach is presented. The first scenario analyzed the production of diesel fuel which was formed through Fischer-Tropsch processing of CO (obtained through electroreduction of CO₂) and hydrogen, while in the second scenario, direct electrochemical CO₂ reduction to formic acid was considered. As per the base case assumptions extracted from the previous outstanding research studies, both processes weren't competitive with the existing fuel prices, indicating that high electrochemical (EC) cell capital cost was the main limiting component. The diesel fuel production was predicted as the best route for the cost-effective production of fuels under conceivable optimistic case assumptions, and the formic acid was found to be costly in terms of stored energy contents and has a facile production mechanism at those costs which are financially competitive with its bulk market price. In both processes, the liquid product cost was greatly affected by the parameters affecting the EC cell capital expenses, such as cost concerning the electrode area, faradaic efficiency, and current density.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.3
• /
• pp.278-286
• /
• 2022

In this study, a 33-mode Free-Flooded Ring (FFR) transducer was designed to apply piezoelectric single crystal PIN-PMN-PT, which has high piezoelectric constants and electromechanical coupling coefficient. To ensure low-frequency high transmitting sensitivity characteristics with a small size of FFR transducer, the commercial FFR transducer based on piezoelectric ceramics was compared. To develop the FFR transducer with broadband characteristics, a piezoelectric segmented ring structure inserted with inactive elements was applied. The oil-filled structure was applied to minimize the change of acoustic characteristics of the ring transducer. It was verified that the transmitting voltage response, underwater impedance, and beam pattern matched the finite element numerical simulation results well through an acoustic test. The difference in the transmitting voltage response between the measured and the simulated results is about 1.3 dB in cavity mode and about 0.3 dB in radial mode. The fabricated FFR transducer had a higher transmitting voltage response compared to the commercial transducer, but the diameter was reduced by about 17 %. From this study, it was confirmed that the feasibility of a single crystal-applied FFR transducer with compact size and high-power characteristics. The effectiveness of the performance prediction by simulation was also confirmed.

• Applied Chemistry for Engineering
• /
• v.33 no.2
• /
• pp.126-132
• /
• 2022

Alkaline fuel cells using liquid fuels such as hydrazine and ammonia are gaining great attention as a clean and renewable energy solution possibly owing to advantages such as excellent energy density, simple structure, compact size in fuel container, and ease of storage and transportation. However, common shortcomings including cathode flooding, fuel crossover, side yield reactions, and fuel security and toxicity are still challenging issues. Real time monitoring of fuel concentrations integrated into a fuel cell device can help improving fuel cell performance via predicting any loss of fuels used at a cathode for efficient energy production. There have been extensive research efforts made on developing real-time sensing platforms for hydrazine and ammonia. Among these, recent advancements in electrochemical sensors offering high sensitivity and selectivity, easy fabrication, and fast monitoring capability for analysis of hydrazine and ammonia concentrations will be introduced. In particular, research trend on the integration of metallic and metal oxide nanoparticles and also their hybrids with carbon-based nanomaterials into electrochemical sensing platforms for improvement in sensitivity and selectivity will be highlighted.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.2
• /
• pp.45-50
• /
• 2022

Ga₂O₃ thin films were grown on n-type Si substrates at various growth temperatures of 500, 550, 600, 650 and 700℃. The Ga₂O₃ thin films grown at 500℃ and 550℃ were characterized as featureless flat surface. Grown at higher temperatures (600, 650, and 700℃) showed very rough surface morphology. To figure out the annealing effect on the thin films grown at relatively low temperatures (500, 550, 600, 650 and 700℃), the Ga₂O₃ films were thermally treated at 900℃ for 10 minutes. Crystal structure of the Ga₂O₃ films grown at 500 and 550℃ were changed from amorphous to polycrystalline structure with flat surface. Ga₂O₃ film grown at 550℃ was chosen for the fabrication of a Schottky barrier diode (SBD). Electrical properties of the SBDs depend on the thermal treatment were evaluated. A MSM type photodetector was made on the low temperature grown Ga₂O₃ thin film. The photocurrent for the illumination of 266 nm wavelength showed 5.32 times higher than dark current at the operating voltage of 10 V.

• Journal of the Korean Institute of Gas
• /
• v.26 no.6
• /
• pp.16-23
• /
• 2022

In this study, characteristics of effect on hydrogen gas was investigated to hydrogen embrittlement by disk and tensile tests. The developed and commercial alloy was fabricated to a plate material made from an alloy ingot. The prepared materials were processed in the form of a disk to measure rupture pressure by hydrogen and helium gas at a rate of 0.1 to 1,000 bar/min. In the hydrogen pre-charged tensile test, a specimen was hydrogenated using an anode charging method, and the yield strength, ultimate tensile strength, elongation, and reduction in area rate were carried by a strain rate test. Also, the microstructure was observed to the fracture surface of the tensile test specimen. As a result, the developed materials satisfied endurable hydrogen embrittlement, and the fractured surface showed a brittleness fracture surface with a depth of several ㎛, but dimple due to ductile fracture could be observed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1013-1024
• /
• 2022

In addition to the assessment measure of electric quality levels, load loss are also a factor in hindering the financial profits of electrical sales companies. Therefore, accurate analysis of load losses generated from distributed power networks is very important. The accurate calculation of load losses in the distribution line has been carried out for a long time in many research institutes as well as power utilities around the world. But it is increasingly difficult to calculate the exact amount of loss due to the increase in the congestion of distribution power network due to the linkage of distributed energy resources(DER). In this paper, we develop smart grid big data infrastructure in order to accurately analyze the load loss of the distribution power network due to the connection of DERs. Through the preprocess of data selected from the smart grid big data, we develop a load loss analysis model that eliminated 'veracity' which is one of the characteristics of smart grid big data. Our analysis results can be used for facility investment plans or network operation plans to maintain stable supply reliability and power quality.