• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.6
• /
• pp.720-731
• /
• 2003

Statement of problem. The importance of fixture design and surface treatment. Purpose. The clinical success of dental in plants is affected by many factors such like as degree of osseointegration, the effective load dispersion for the prostheses, and a lot of attempts have been made to overcome the difficulties. In this study, efforts were made to find the possibility of clinical acceptance of the dental implants of newly designed surface and resorbable blast media surcace. Materials and methods. In this study, two groups of custom-made, screw-shaped implants were prepared. The first with the consisting of Branemark clone design and the other with the new design. These implants were divided into four groups according to the kinds of surface treatment. Four implants($AVANA^{(R)}$, Osstem, Busan, Korea)of each group were installed in twenty rabbits. Group A was consisted of Branemark done implant left as machined, Group B with Branemark clone implants with RBM(Resorbable blast media) surface, Group C with newly designed implants left as machined and Group D with newly designed implants with RBM surface. One of the twenty rabbits died from inflammation and the observation was made for six weeks. Specimens from four groups were observed using scanning electron microscopy with 40, 100, 1000 magnification power and microsurface structures were measured by white-light scanning interferometry for three dimensional surface roughness measurements(Accura $2000^{(R)}$, Intek-Plus, Korea.). Removal torque was measured in 17 rabbits using digital torque gauge(MGT 12R, Mark-10 corp., NY, U.S.A.) immediately after the sacrifice and two rabbits were used for the histologic preparation(EXAKT $310^{(R)}$, Heraeus Kulzer, wehrheim, Germany) of specimens and observed under light microscope. Resonance frequency measurement($Osstell^{(R)}$) was taken with the 19 rabbits at the beginning of the implant fixation and immediately after the sacrifice. Results. Following results were taken from the experiment. 1. The surface of the RBM implants as seen with SEM had rough and irregular pattern with reticular formation compared to that of fumed specimens showing different surface topographies. 2. The newly designed implant with RBM surface had high removal torque value among four groups with no statistical significance. The average removal torque was $49.95{\pm}6.70Ncm$ in Group A, $51.15{\pm}4.40Ncm$ in Group B, $50.78{\pm}9.37Ncm$ in Group C, $51.09{\pm}4.69Ncm$ in Group D. 3. The RFA values were $70.8{\pm}4.3Hz$ in Group A, $71.8{\pm}3.1Hz$ in Group B, $70.9{\pm}2.5Hz$, $72.7{\pm}2.5Hz$ in Group D. Higher values were noted in the groups which had surface treatment compared to the untreated groups with no statistical significance. 4. The results from the histomorphometric evaluation showed a mean percentage of bone-to-implant contact of $45{\pm}0.5%$ in Group A, $55{\pm}3%$ in Group B, $49.5{\pm}0.5%$ in Group C, and $55{\pm}3%$ in Group D. Quite amount of newly formed bone were observed at the surface RBM-treated implants in bone marrow space.

• Clinical and Experimental Reproductive Medicine
• /
• v.34 no.2
• /
• pp.87-94
• /
• 2007

Objective: To examine determinants of successful pregnancy and evaluate COH-IVF outcomes of infertile patients after conservative surgical treatment of borderline ovarian tumor (BOT). Methods: In women of BOT (n=93), from January 1995 to December 1999, 44 of 93 women underwent conservative surgical treatment. From theses 44 women, patients characteristics, surgical and histological parameters were compared between 14 women who conceived and 30 women who failed to conceive. For 5 infertile women of 30 women who failed to conceive, 10 attempt IVF cycles were analysed; clinical pregnancy rate (CPR), implantation rate (IR) and live birth rate (LBR). Results: Women who conceived tend to be younger (25.9 vs 27.0 years) and lower serum CA-125 level (59.7 vs 72.9) compared to women who failed to conceive without significant difference. For 8 cycles out of 10 attempt IVF cycles, except for 2 cancellation cycles, the mean number of oocytes retrieved was 5.6 (range 2$\sim$16) with a mean fertilization rate of 74.4%. The CPR, IR and LBR per embryo transfer were 50.0% (4/8 cycles), 31.6% (6/19) and 50.0% (4/8 cycles) respectively. During the mean follow-up period after COH-IVF initiation, 29.6 (range 14$\sim$61) months, no recurrence was found. Conclusion: No determinant of successful pregnancy was found after conservative treatment for BOT. COH-IVF may be considered for infertile patients after conservative treatment of BOT. However, larger clinical studies with longer follow-up are necessary to evaluate the safety and efficacy of COH-IVF. All patients should be informed of the potential risks associated with ovarian hyperstimulation and close follow-up is necessary after COH-IVF.

• Korea journal of population studies
• /
• v.13 no.2
• /
• pp.1-18
• /
• 1990

This is a study which attempt to analyze changing patierns of economic active popu-lation, t o estimato- future patterns, and exa- mine vartons problems arises by changing c ire u mst ances of t he labor force market in- clunging soici al, economic ic, heathl th and demoi-graph ic aspects. We have constructed series of wotking life table which are useful in syt uiolyioig the lirocess of growth and structural change of labor force. Work i ng life tables represent ihie life eyele of econrmic' activity in hi ypothetical cohorts, that is. gen-erat i on of men Sn bject at eat' b period ot f their lives th given ra to's o mor tali it y and of par-- tici pation in economic activities. The tabloes prot' ide measorues of the alvet'age he ng t able of economically aeti \- e life. and agespecific rates of en trannee' into and retirement from the hahn' force. In const routing working life tables, age-specific activity rates and life tabole popula- titoto which represents contemporary condi-tions of moortality in Korea au'e the basic' maltoerials. We have derived the age-specific rates foorm economically active population survey, whoich were conducted by the Bureau of Statistics, Economic Planning Borard of the Korean government. Working life tables are constructed for men wtable these materi- als in the year of 1970, 1980 and 1988 by a modified Wolfbein-Wool's method. Some of the findings may be summerized as follow : 1) A central part of constructing working life table is calculation of stationary' economic active population, which represents the number of men in the stationtary population extoected to be in the labor force at each age group in the life span. The stationary economic active population by age have generally a universal pattern, where they rise sharply in the early twenties, approach its' peak in the thirties decline thereafter. at first graolually and then more rapidly at an advanced age. Korean men show the same general pa ttern of age distribution of stationary eco-- nomic active population with sharp increase hegining from the age interval of 20 to 24, reaching to maximum level at older age. The population. however, presumably, increased substantially due to increaseing school atte endance rates. Another difference exiSts in the youngest age groups, that is the activity rate in the year of 1988 is lower than that of Japan. The table shows an analysis of changes in the age distrihution of labor force between 1970, 1980 and 1988. 2) It was shown an analysis of changes in the age distribution and cause of separation from labor force. The entrance rate to labor force has increased from 18~\5 persons to 299 persons per 1000 head of stationary population between that of 1980 than that of 1988 for Korean men in 20~24 age group. The entrace rate to labor force shows a rapid entrance appearance concentrated on the 15~24 age group. The separation rate from labor force by retirment in Korea in the year of 1988 shows a great difference of the about four times as much as that of Japan. 3) The functions of table illustrate the patterns of working life of males in Korea in 1970, 1980 and 1988. The average remaining number of economically active years, e at age 15 in 1988 is 46.39 which is 2.12 years of increase compared with that of at age 15 in 1970,1980 and 1988 are 43.90,44.27 and 46.39 respectively, showing steadily increase dur- ing the past double decade the increase in the length of economically active life various age may be considered to have come both from extention of general life expectancy and from increasing entrance rate to economic activity in high age that of working is far greater in 1988 than that of 1980. The gaps between expectation of life and average remaining years of economically active widened due to rapid improvement of mortality level in Ko- rea. This observation together with the population pressure by the appearance of a group of younger population implies that constant increase of economically inactive population among older age group.

• Korean Journal of Food Science and Technology
• /
• v.10 no.1
• /
• pp.78-82
• /
• 1978

In a series of studies on the utilization of persimmons, the purpose of this experiment was to examine the optimum thickness of film using different number of persimmons per film bag. 'Fuyu', persimmon variety was used in this investigation. The results obtained were as follows: The optimum thickness of the film bag was 0.08mm, 0.06mm, and 0.04mm for the bags packed with 3, 10 and 50 persimnons, respectively. The changes in the ratio of firmness, loss of fresh weight, titrable acidity and percentage of sugar contents were minimal in these three optimum combinations than the others. These results could be explained by the balanced optimum gas concentration, $CO_2$ 5-10% and $O_2$ 5%, in those three optimum combination. Therefore, it was suggested that the different thickness of film bag needs a particular number of fruits packed per bag for the long term storage in persimmons.

• Korean Journal of Weed Science
• /
• v.14 no.2
• /
• pp.128-143
• /
• 1994

At 5 DAS/T, leaf primordia of rice stems that were grown under dry condition in transverse sections were strongly stained while those under water condition had many aerenchyma cells well developed. On the other hand, leaf primordia and large air spaces in stem of transplanted rice were well developed. Rice in leaf anatomy had small and fine epidermal cells, chlorophyllous mesophylls, and bulliform cells but had no chlorophyllous vascular bundle sheath cells, while barnyardgrass leaf had large, rough and irregularly arranged epidermal cells, chlorophyllous vascular bundle sheath cells, and non-bulliform cells but had no chlorophyllous mesophylls. Epidermal cells of transplanted rice, however, were well developed, differentiated and sclerified. Cross sections of rice root under dry condition showed cell contents, regularly arranged cells, non-intercellular spaces and non-aerenchyma while under water condition had well-developed intercellular spaces, aerenchyma cells, small and densely arranged epidermis, sclerified exodermis and sclerenchyma cells. But root anatomy of transplanted rice consisted of finely, regularly arranged epidermis, well-developed intercellular spaces and nucleous cells.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.81-95
• /
• 1995

Now, safety assurance in construction sites should be accomplished by its own organization rather than control of the code or government. It is believed that the safety assurance can be considerably improved by a lecture or an education using the existing theories or literatures up to now, but it is thought that fundamental safety assurance we not able to be accomplished without developing safety devices '||'&'||' equipment or taking fundamental measures, based on the result analyzed from workers behaviors. There are various behaviors of the workers showed in construction site, but only tests for hammerusing works such as form, re-bar, stone workers directly related to the grip strength are mainly performed, investigated and measured here for the study. The above works are similar to power grip, 7th picture on seven items which are categorized for hand grip types(Ammermin 1956 ; Jones ; Kobrick 1958). Measurements of grip strength are commonly taken in anthropometric surveys. They are easy to administer but unfortunately it is rather dubious whether they yield any data that are of interest to the engineer. Very fewer controls of tools are grasped and squeesed studies showed very little overall correlation between grip strength and other measures of bodily strength (Laubach, Kromer, and Thordsen 1972), but hammer-using work which is practically progressed in construction site are mainly influenced with grip strength. According to the investigation on work measurement, it is shown that 77% of form worker are using hammer to be related to grip strength. In this study, it is particularly noticed that wearing safety gloves in construction site is required for workers safety but 20% difference between grip strength with safety gloves and without ones are commonly neglected in the site(Fig. 1). Nevertheless, safety operation with consideration of the above 20% difference is not considered in the construction site. Factors of age, kinds of work, working time, with or without safety gloves are in vestigated '||'&'||' collected at the sites for this study. Test, not at each working hour but at 14 : 00 when the almost all of the workers think the most tired, resulting from the questionaires, also when it is shown on the research report has been performed and compared for main kinds of works : form '||'&'||' re-bar work. Tests were performed with both left SE rightand of the workers simultaneously in construction site using Rand Dynamometer(Model 78010, Lafayette Instrument Co., Indiana, U.S.A) by reading grip strength on the gauge while they are pulling, and then by interviewing on their ages, works, experiences and etc., directly. The above tests have been performed for the dates of 15th march-26th May '95 with consideration of site condition. And even if various factors of ambient temperature on the testing date, working condition, individual worker's habit and worker's condition of the previous ate are concerned with the study. Those are considered as constants in this study. Samples are formwork 53, rebar 62, electrician 5, plumber 4, welding 1 from D construction Co., Ltd, ; formwork 12, re-bar 5, electrician 2, from S construction Co., Ltd, , formwork 78, re-bar 18, plumber 31, electrician 13, labor 48, plumber 31, plasterer 15, concrete placer 6, water proof worker 3, maisony 5 from B construction Co., Ltd. As In the previously mentioned, main aspect to be investigated in this study will be from '||'&'||' re-bar work because grip strength will be directly applied to these two kinds of works ; form '||'&'||' re-bar work, eventhough there are total 405 samples taken. It is thought that a frequency of accident occurrence will be mainly two work postures "looking up '||'&'||' looking down" to be mainly sorted, but this factor is not clarified in this study because It will be needed a lot of work more. Tests has been done at possible large scale of horizontally work-extended sites within one hour in order to prevent or decrease errors '||'&'||' discrepancies from time lag of the test. Additionally, the statistical package computer program SPSS PC＋has been used for the study.

• Journal of Korean society of Dental Hygiene
• /
• v.4 no.1
• /
• pp.105-117
• /
• 2004

The purpose of this study was to examine the effect of aroma therapy on anxiety and pain before and after tooth extraction. The subjects in this study were 60 patients who felt severe anxiety and pain due to tooth extraction. The experiment was conducted from January through March, 2004, by organizing an experimental group and a control group with 30 patients each. The experimental group was asked to keep wearing lavender-containing necklaces from two days before tooth extraction to inhale lavender, and no such an action was taken to the control group. The collected data were analyzed with SPSS 10.0 program to obtain statistical data. and ${\times}2$ test and t-test were implemented. The findings of this study were as follows: 1. Regarding whether or not the experimental and control groups were homogeneous, men outnumbered women, and the largest number of the patients were in their 30s. Those who were married were more than the others who were unmarried in number, and those who lived with their spouses under the same roof together outnumbered the others who didn't, as the rate of the former stood at 65 percent in the experimental group and 86.4 percent in the control group. They expressed high satisfaction at their spouses, since 45 percent of the experimental group and 31 percent of the control group did it, but the difference between them and those who were unsatisfied was insignificant (pE0.347). By occupation, the largest number of people in the experimental group, which numbered 16.7 percent, were self-employed, and lots of patients in the control group were government workers. As for blood type, type A was most prevailing, which recorded 43.3 percent. By religion, 43 percent of the experimental group had no religion, whereas 36.7 percent of the control group were Christian. The most common monthly income ranged from 2 million to 2.5 million won. 2. There was little disparity in past pain experience between the two groups before aroma therapy was applied. The experimental group underwent more pain (6.15) than the control group (5.78), but the difference wasn't significant. The experimental group (90%) experienced more anxiety and fear than the control group(83%), but the difference was insignificant. This fact showed that there was little gap between the two groups in anxiety and fear caused by tooth extraction. Contrary to earlier expectation that pre-anxiety might not be the same. little significant difference was found. 3. After aroma therapy was applied, 50 percent of the experimental group and 23.3 percent of the control group suffered significantly less anxiety and fear about tooth extraction(${\times}2$=4.59, pE.05). And the experimental group exposed to aroma therapy was less nervous(3.0) than the control group(4.39), and the gap between the two was significant (t=13.37, pE.001). Therefore, aroma therapy had a good effect on alleviating their anxiety. During tooth extraction. 73.3 percent of the experimental group and 93.3 percent of the control group felt pain. The former group suffered Significantly less pain(${\times}2$=4.32, PE.05). Concerning the extent of pain, the experimental group(2.53) found it less painful to have their teeth extracted than the control group(5.50), and the gap between the two was significant(t=5.89, PE.05). 4. As to the effect of aroma therapy on alleviating anxiety or fear, the experimental group(33.3%) felt that aroma therapy let them more relieved. Every member of that group was willing to use aroma therapy again in the future, and 86.7 percent of that group perceived that aroma therapy made a difference to dental treatment. The experimental group responded to aroma therapy favorably, as every member of it had an intention to advise others to use that therapy.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.19-24
• /
• 2004

Introduction : The Vaginal, the urethra, the vulva and anal cancer avoid the many dose to femur head and the additional treatment is necessary in inguinal LN. The partial transmission block to use inguinal LN addition there is to a method which it treats and produce partial transmission block a method and the MLC which to it analyzes. Material & Methode : The Inguinal the LN treatment patient partial transmission it used block and the MLC in the object and with solid water phantom with the patient it reappeared the same depth. In order to analyze the error of the junction the EDR2 (Extended dose range, the Kodak and the U.S) it used the Film and it got film scanner it got the beam profile. The partial transmission block and the MLC bias characteristic, accuracy and stability of production for, it shared at hour and comparison it analyzed. Result : The partial the transmission block compares in the MLC and the block production is difficult and production hour also above 1 hours. The custom the block the place where it revises the error of the junction is a difficult problem. If use of the MLC the fabrication will be break and only the periodical calibration of the MLC it will do and it will be able to use easily. Conclusion : The Inguinal there is to LN treatment and partial transmission block and the MLC there is efficiency of each one but there is a place where the junction of block for partial transmission block the production hour is caught long and it fixes and a point where the control of the block is difficult. like this problem it transfers with the MLC and if it treats, it means the effective treatment will be possible.

• Applied Biological Chemistry
• /
• v.43 no.3
• /
• pp.218-224
• /
• 2000

The efforts were made to optimite ethanol extraction from persimmon leaf with the time of extraction$(1.5{\sim}2.5\;hrs)$, the temperature of extraction$(70{\sim}90^{\circ}C)$, and the concentration of ethanol$(0{\sim}40%)$ as three primary variables together with several functional characteristics of persimmon leaf as reaction variables. The conditions of extraction was best fitted by using response surface methodology through the center synthesis plan, and the optimal conditions of extraction were established. The contents of soluble solid and soluble tannin went up as the concentration of ethanol went up and the temperature of extraction went down, and the turbidity went down as the concentration of ethanol went down. Electron donation ability was hardly affected by the extraction temperature and had the tendency to go up as the concentration of ethanol went up. The inhibitory activity of xanthine oxidase(XOase) had the tendency to go up as both the concentration of ethanol and the temperature of extraction went up. The inhibitory activity of angiotensin converting enzyme(ACE), the significance of which still was not recognized, showed the maximum when the concentration of ethanol was 27%. In result, the optimal conditions of extraction was the extraction time of two hours, the extraction temperature of $75{\sim}81^{\circ}C$, and the ethanol concentration of $33{\sim}35%$.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.2
• /
• pp.116-124
• /
• 2006

Remarkable winter season warming has been observed in East Asian countries during the last century. Accordingly, significant effects on dormancy and the resulting budburst of deciduous trees are expected. However phenological observations are rare and insufficient compared with the long-time climate records in the same region. A chill-day accumulation, which can be estimated from daily maximum and minimum temperature, is expected to make a reasonable proxy for dormancy depth of temperate zone fruit trees. To simulate dormancy depth during 1921-2004, a chill-day model parameterized for 'Campbell Early' grapevine, which is the major cultivar grown virtually anywhere in South Korea, was applied to daily temperature data at 8 locations in South Korea. The calculations showed that the chilling requirement for breaking endo-dormancy of this grapevine cultivar can be satisfied by mid-January to late February in South Korea, and the date was delayed going either northward or southward from the 'Daegu-Jeonju' line crossing the middle of South Korea in the east-west direction. Maximum length of the cold tolerant period (the number of days between endo-dormancy release and forced dormancy release) showed the same spatial pattern. When we divide the 83 years into 3 periods (I: 1921-1950, II: 1951-1980, and III: 1981-2004) and get the average of each period, dormancy release date of period III was accelerated by as much as 15 days compared with that of period I at all locations except Jeju (located in the southernmost island with subtropical climate) where an average15-day delay was predicted. The cold- tolerant period was also shortened at 6 out of 8 locations. As a result, budburst of 'Campbell Early' in spring was accelerated by 6 to 10 days at most locations, while inter-annual variation in budburst dates was increased at all locations. The earlier budburst after the 1970s was due to (1) warming in winter resulting in earlier dormancy release (Incheon, Mokpo, Gangneung, and Jeonju), (2) warming in early spring accelerating regrowth after breaking dormancy (Busan and Jeju), and (3) both of them (Seoul and Daegu).