• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.96-99
• /
• 2005

Phase transition from normal- to inverse-spinel structure has been observed for $Fe_xCo_{3-x}O_4$ thin films as the Fe composition (x) increases from 0 to 2. The samples were fabricated as thin films by sol-gel method on Si(100) substrates. X-ray diffraction measurements revealed a coexistence of two phases, normal and inverse spinel, for $0.76{\le}x{\le}0.93$. The normal-spinel phase is dominant for $x{\le}0.55$ while the inverse-spinel phase for $x{\ge}l.22$. The cubic lattice constant of the inverse-spinel phase is larger than that of the normal-spinel phase. For both phases the lattice constant increases with increasing x. X-ray photoelectron spectroscopy measurements revealed that both $Fe^{2+}$ and $Fe^{3+}$ ions exist with similar strength in the x=0.93 sample. Conversion electron $M\ddot{o}ssbauer$ spectra measured on the same sample showed that $Fe^{2+}$ ions prefer the octahedral $Co^{3+}$ sites, indicating the formation of the inverse-spinel phase. Analysis on the measured optical absorption spectra for the samples by spectroscopic ellipsometry indicates the dominance of the normal spinel phase for low x in which $Fe^{3+}$ ions tend to substitute the octahedral sites.

• Korean Journal of Ichthyology
• /
• v.31 no.1
• /
• pp.23-29
• /
• 2019

The embryonic development and hatchability of the artificially fertilized eggs of convict grouper (Hyporthodus septemfasciatus) ♀${\times}$giant grouper (Epinephelus lanceolatus) ♂ (CGGG) were compared to those of the maternal pure species (convict grouper ♀${\times}$♂, CG) to establish a novel grouper hybrid for aquaculture industry. The fertilized eggs were divided into nine 5-L beakers (3,000~5,000 eggs/beaker) filled with UV sterilized seawater and incubated at a temperature range of $23.5{\sim}24.8^{\circ}C$ (32.1~32.8 psu). The percentages of fertilization and hatching of CGGG were $69.4{\pm}1.5%$ and $59.0{\pm}5.1%$, respectively and were significantly lower than those of CG (p<0.05). The CGGG proceeded normal embryonic development similar to that of CG, but showed an irregular cleavage, immature embryonic body and spinal deformity in hatched larvae. The incubation time from fertilization to hatching of CGGG was 31 hrs, which was approximately 2 hrs slower than that of CG. Our study provided the possibility of mass production of grouper hybrid CGGG larvae.

• The Korean Journal of Mycology
• /
• v.41 no.1
• /
• pp.42-46
• /
• 2013

Burkholderia pyrrocinia CAB08106-4 was parceled out from the Chungnam Agricultural Research and Extension Center, Korea to evaluate the antagonistic activity against garlic white rot caused by Sclerotium cepivorum. The optimum cultural conditions including temperature, pH, enzyme activity, carbon and nitrogen sources were determined. The optimum culture conditions of B. pyrrocinia CAB08106-4 were $286^{\circ}C$, 150 rpm and pH 7. Chitinase only showed activity among several tested enzymes. The highest cell growth was obtained with 1% glucose and 0.1% $(NH_4)_2SO_4$, respectively.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.3
• /
• pp.131-137
• /
• 2004

Sol-gel method which provides better electrochemical and physiochemical properties compared to the solid-state method was used to synthesize the material of $LiFe_yMn_{2-y}O_4$. Fe was substituted to increase the structural stability so that the effects of the substitution amount and sintering temperature were analyzed. XRD was used for the structural analysis of produced material, which in turn, showed the same cubic spinel structure as $LiMn_2O_4$ despite the substitution of $Fe^{3+}$. During the synthesis of $LiFe_yMn_{2-y}O_4$, as the sintering temperature and the doping amount of Fe(y=0.05, 0.1, 0.2)were increased, grain growth proceeded which in turn, showed a high crystalline and a large grain size, certain morphology with narrow specific surface area and large pore volume distribution was observed. In order to examine the ability for the practical use of the battery, charge-discharge tests were undertaken. When the substitution amount of $Fe^{3+}\;into\;LiMn_2O_4$ increased, the initial discharge capacity showed a tendency to decrease within the region of $3.0\~4.2V$ but when charge-discharge processes were repeated, other capacity maintenance properties turned out to be outstanding. In addition, when the sintering temperature was $800\~850^{\circ}C$, the initial capacity was small but showed very stable cycle performance. According to EVS(electrochemical voltage spectroscopy) test, $LiFe_yMn_{2-y}O_4(y=0,\;0.05,\;0.1,\;0.2)$ showed two plateau region and the typical peaks of manganese spinel structure when the substitution amount of $Fe^{3+}$ increased, the peak value at about 4.15V during the charge-discharge process showed a tendency to decrease. From the previous results, the local distortion due to the biphase within the region near 4.15V during the lithium extraction gave a phase transition to a more suitable single phase. When the transition was derived, the discharge capacity decreased. However the cycle performance showed an outstanding result.

• Journal of the Korean Ceramic Society
• /
• v.42 no.6 s.277
• /
• pp.384-390
• /
• 2005

[ ${\alpha}-Al_2O_3$ ] precursor was synthesised by sol-gel method using aluminum sulfate, sodium sulfate and sodium carbonate as law materials. The flaky ${\alpha}-Al_2O_3$ crystals were prepared by heating using precursor about $1,050^{\circ}C$. In this study, the effect of some transition-metal sulfate ($FeSO_4,\;SnSO_4,\;ZnSO_4$) addition have been investigated. When iron sulfate was added, it could see that act on impurities in crystal growth process. In case of tin sulfate, distribution of Platelets was very broad. When flaky ${\alpha}-Al_2O_3$ crystals were prepared zinc sulfate addition, thickness, size, and distribution of platelets was suited to industrial application. The average diameter of flaky ${\alpha}-Al_2O_3$ crystals was about 20 $\mu$m, and its thickness was about 0.3 $\mu$m. Increasing addition of zinc sulfate, thickness of ${\alpha}-Al_2O_3$ platelet was decreased.

• Journal of the Korean Ceramic Society
• /
• v.32 no.10
• /
• pp.1178-1188
• /
• 1995

Bi4Ti3O12 (BIT) and its rare earth (Y, Nd, Sm, Gd)-substituted derivatives were synthesized using a sol-gel method to investigate their microstructures, cystal structures and electrical properties depending on the subsituted elemetns. Nd- or Sm-substitution into BIT appeared to be favorable, while Y- or Gd-substitution occurred with a pyrochlore phase. This suggests that a smaller trivalent rare earth ion may not be favorable in the structure of BIT. The rare earth derivatives showed that their particle sizes and shapes were considerably different depending on the kinds of substituted elements. Y-substitution resulted in developing a relatively even particle size and a dense microstructure. In structure, they may be similar to the pseudo-orthorhombic BIT but close to a paraelectric tetragonal phase. Their a (or b) axes were shortened, compared to the one of BIT. Such a distortion may result a decrease in the tilting of TiO6. BIT and the derivatives showed that their dielectric constants and losses were 40~120 and less than 0.03, respectively in the frequency range of 1~10 MHz. The dielectric loss of Y-substituted derivative was the lowest one and changed a little to frequency. Curie points were observed in all the derivatives like BIT to suggest that they would be ferroelectric. The temperature stability of the delectric properties of the derivatives below the Curie points were relatively better than the one of BIT.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.93-97
• /
• 2009

The nanoporous $F:SnO_2$ materials have been prepared through the controlled hydrolysis of fluoro(2-methylbutan-2-oxy)di(pentan-2,4-dionato)tin followed by thermal treatment at $400-550^{\circ}C$. The main IR features include resonances at 660, 620 and 540 cm-1. From the TG-DTG result, three main mass losses of 6.5, 13.3 and 3.8 at 81, 289 and $490^{\circ}C$ are observed between 50 and $650^{\circ}C$ yielding a final residue of 76.0%. The size of Sn $O_2$ nanoparticles rose from 5 nm to 10-12 nm as the temperature of thermal treatment is increased from 400 to $550^{\circ}C$.

• Journal of Yeungnam Medical Science
• /
• v.35 no.1
• /
• pp.40-44
• /
• 2018

Background: Pregabalin has been studied as a single or multimodal analgesic drug for postoperative pain management in different types of surgeries. We evaluated the analgesic effect of 150 mg of pregabalin in resolving post-gastrectomy pain. Methods: Forty-four patients were randomized into two groups: a pregabalin group that received oral pregabalin (150 mg) 2 h before anesthetic induction, and a control group that received placebo tablets at the same time. Data on postoperative pain intensity (visual analog scale [VAS], at 30 min, 2 h, 4 h, and 24 h), consumption of fentanyl in patient-controlled analgesia (PCA), and the proportion of patients requiring rescue analgesics at different time intervals (0-2 h, 2-4 h, and 4-24 h) were collected during the 24 h postoperative period. Results: The VAS scores did not show significant differences at any time point and consumption of fentanyl in PCA and the proportion of patients requiring rescue analgesics did not differ between the two groups. The groups did not differ in the occurrence of dizziness, sedation, and dry mouth. Conclusion: A preoperative 150 mg dose of pregabalin exerts no effect on acute pain after gastrectomy.

• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.271-277
• /
• 2022

We analyzed the effects of the interface trap on the output characteristics of an inversion mode n-channel GaN Schottky barrier (SB)-MOSFET based on the N_it distribution using TCAD simulation. As interface trap number density (N_it) increased, the threshold voltage increased while the drain current density decreased. Under N_it=5.0×10¹⁰ cm^-2 condition, the threshold voltage was 3.2 V for V_DS=1 V, and the drain current density reduced to 2.4 mA/mm relative to the non-trap condition. Regardless of the N_it distribution type, there was an increase in the subthreshold swing (SS) following an increase in N_it. Under U-shaped N_it distribution, it was confirmed that the SS varied depending on the gate voltage. The interface fixed charge (Q_f) caused an shift in the threshold voltage and increased the off-state current collectively with the surface trap. In summary, GaN SB-MOSFET can be a building block for high power UV optoelectronic circuit provided the surface state is significantly reduced.

• Journal of Food Hygiene and Safety
• /
• v.35 no.1
• /
• pp.60-67
• /
• 2020

This study determined the microbial contamination levels of hot pepper at harvest, sorting, and distribution stages to suggest a way of reducing the microbial contamination of hot peppers by changing work gloves used throughout these processes. According to the monitoring results, the contamination levels of total aerobic bacteria (TAB) were found in the following order: soil (5.3±0.9 log CFU/g), hot pepper (4.2±0.9 log CFU/g), gloves (4.2±0.6 log CFU/g), baskets (4.1±0.7 log CFU/ g), clippers (3.9±0.6 log CFU/ g) and water (3.2±1.1 log CFU/g) at harvest stage. The contamination level of coliforms were found in the following order: soil (2.2±0.9 log CFU/g), hot pepper (2.2±0.3 log CFU/g), gloves (2.1±0.6 log CFU/g), clippers (2.0±0.21 log CFU/ g) and baskets (1.9±1.1 log CFU/ g) at harvest stage. TAB on hot pepper at the harvest stage was reduced from 4.2±0.9 log CFU/g to cold storage 3.8±0.2 log CFU/g and room temperature storage 2.6±0.3 log CFU/g, respectively. By the replacement of work gloves and lower distribution temperature, TAB levels of the peppers were significantly reduced compared to those without replacement and distributed at room temperature. In addition, the utilization of plasma was effective on reducing microbial contamination of hot pepper. These results demonstrated that appropriate replacement of gloves at the harvest stages, using plasma in the distribution stage, and refrigerated distribution conditions, which are simple and easy to practice in the field, are effective to reduce microbial contamination on hot peppers.