• Journal of Electrochemical Science and Technology
• /
• 제12권2호
• /
• pp.230-236
• /
• 2021

Ionic conduction mechanism of Mg-Al layered double hydroxides (LDHs) intercalated with CO₃^2- (Mg-Al CO₃^2- LDH) was studied. The electromotive force for the water vapor concentration cell using Mg-Al CO₃^2- LDH as electrolyte showed water vapor partial pressure dependence and obeyed the Nernst equation, indicating that the hydroxide ion transport number of Mg-Al CO₃^2- LDH is almost unity. The ionic conductivity of Mg(OH)₂, MgCO₃ and Al₂(CO₃)₃ was also examined. Only Al₂(CO₃)₃ showed high hydroxide ion conductivity of the order of 10^-4 S cm^-1 under 80% relative humidity, suggesting that Al₂(CO₃)₃ is an ion conducting material and related to the generation of carrier by interaction with water. To discuss the ionic conduction mechanism, Mg-Al CO₃^2- LDH having deuterium water as interlayer water (Mg-Al CO₃^2- LDH(D₂O)) was prepared. After the adsorbed water molecules on the surface of Mg-Al CO₃^2- LDH(D₂O) were removed by drying, DC polarization test for dried Mg-Al CO₃^2- LDH(D₂O) was examined. The absorbance attributed to O-D-stretching band for Mg-Al CO₃^2- LDH(D₂O) powder at around the positively charged electrode is larger than that before polarization, indicating that the interlayer in Mg-Al CO₃^2- LDH is a hydroxide ion conduction channel.

• 한국자기학회지
• /
• 제14권3호
• /
• pp.94-98
• /
• 2004

MgCCo$_3$에서 Mg와 Co로 이루어진 (001)표면(MgCo-Term) 또는 C와 Co로 이루어진 (001표면(CCo-term)의 전자구조와 자성을 FLAPW 에너지띠 방법을 이용하여 이론적으로 계산하였다. MgCo-Term의 경우 표면에서 Co원자의 자기모멘트는 1.00$\mu$$_{B}$로서 가운데층에 비하여 많이 증가하였고 표면 바로 밑층에서는 가운데층과 비슷한 값을 보였다. CCo-Term의 경우 Co원자의 자기모멘트는 표면에서 뿐만 아니라 표면 바로 밑층에서도 증가하여 각각 0.75와 0.80$\mu$$_{B}$의 값을 나타내고 있다. C와 Mg원자는 두 경우 모두 Co원자와 반대방향으로 스핀분극되었다. 계산된 상태밀도로부터 이러한 표면에서의 자기모멘트의 증가는 Co-3d 띠의 국소화에 의함을 알 수 있었고 여기서 Co-3d와 C-2p 사이의 띠 혼성이 중요한 역할을 하였다.

• 한국건축시공학회지
• /
• 제15권3호
• /
• pp.281-289
• /
• 2015

본 연구에서는 $CO_2$ 양생 효과를 극대화 할 수 있는 ${\gamma}-C_2S$와 MgO와 같은 $CO_2$ 흡수 물질을 혼입한 시멘트 페이스트의 $CO_2$ 양생 효과에 관한 연구를 위하여 W/B를 40%로 설정하고 혼화재료 ${\gamma}-C_2S$와 MgO를 90% 다량 치환하여 혼화재료, $CO_2$ 양생 유무에 따른 압축강도 측정, 미세 화학분석을 실시하였다. 그 결과 $CO_2$ 양생으로 인해 Plain의 경우 약 1.08배~1.26배의 압축강도 증가 효과가 나타났으며 ${\gamma}-C_2S$와 MgO를 90% 치환한 ${\gamma}-C_2S$, MgO 실험체의 경우, 각각 14.56배~45.7배, 6.5배~10.37배 향상 효과가 나타났다. 이에 따라 미세 화학분석을 실시하여 다량의 $CaCO_3$, $MgCO_3$가 생성된 것을 확인하고 공극 감소의 효과를 확인하였다. 따라서 $CO_2$ 흡수물질 ${\gamma}-C_2S$, MgO를 다량 혼입한 시멘트 페이스트의 $CO_2$ 양생에 의한 압축강도 발현효과가 검증됨을 확인할 수 있었다.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.598-603
• /
• 2012

MgO based cement for the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. Furthermore, adding reactive MgO to Portland-pozzolan cement can improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as starting materials was carried out. In order to increase the hydration activity, $MgCO_3$ and serpentinite were fired at a temperature higher than $600^{\circ}C$. In the case of $MgCO_3$ as starting material, hydration activity was highest at $700^{\circ}C$ firing temperature; this $MgCO_3$ was completely transformed to MgO after firing. After the hydration reaction with water, MgO was totally transformed to $Mg(OH)_2$ as hydration product. In the case of using only $MgCO_3$, compressive strength was 35 $kgf/cm^2$ after 28 days. The addition of silica fume and $Mg(OH)_2$ led to an enhancements of the compressive strength to 55 $kgf/cm^2$ and 50 $kgf/cm^2$, respectively. Serpentine led to an up to 20% increase in the compressive strength; however, addition of this material beyond 20% led to a decrease of the compressive strength. When we added $MgCl_2$, the compressive strength tends to increase.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.175-176
• /
• 2008

In this study, the sintering properties and structural properties of the $Mg_5Ta_4O_{15}$cation-deficient perovskite ceramics with $Li_2CO_3$ additions are investigated. The cation-deficient perovskite ceramics are prepared through the solid-state route. According to the XRD pattern, $Mg_4Ta_2O_9$, $MgTa_2O_6$ and $Mg_5Ta_4O_{15}$ phase existed in sintered pure $Mg_5Ta_4O_{15}$ ceramics. With $Li_2CO_3$, additions, the peak intensities of $Mg_4Ta_2O_9$ and $MgTa_2O_6$ phase were reduced. Also, diffraction intensity of the $Mg_5Ta_4O_{15}$ phase was increased with increments of $Li_2CO_3$ additions. The bulk densities were increased with increasing of $Li_2CO_3$ amount and approach the theoretical density of the $Mg_5Ta_4O_{15}$ ceramics, more and more. Microstructure of the $Mg_5Ta_4O_{15}$ ceramics were densified more and more by additions of $Li_2CO_3$. The bulk density of $Mg_5Ta_4O_{15}$+5wt% $Li_2CO_3$ ceramics sintered at $1500^{\circ}C$ for 10 hours was $5.88g/cm^3$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.19-20
• /
• 2007

At first the $Ba_{0.5}Sr_{0.5}TiO_3$-MgO powder with $B_2O_3-Li_2CO_3$ were made by the Sol-Gel method. The thick films of BST-MgO with $B_2O_3-Li_2CO_3$ were fabricated on the $Al_2O_3$ substrates coated with Pt by the screen printing method. The structural and dielectric properties of the BST-MgO thick film with $B_2O_3-Li_2CO_3$, addition were investigated. The structure of the BST-MgO with $B_2O_3-Li_2CO_3$ thick films were dense and homogeneous with no pores. The dielectric constant was increased and dielectric loss was decreased with increasing the sintering temperature.

• 한국재료학회지
• /
• 제25권2호
• /
• pp.75-80
• /
• 2015

The carbon dioxide($CO_2$) released while producing building materials is substantial and has been targeted as a leading contributor to global climate change. One of the most typical method to reducing $CO_2$ for building materials is the addition of slag and fly ash, like pozzolan material, while another method is reducing $CO_2$ production by carbon negative cement development. The MgO-based cement was from the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. It is also believed that adding reactive MgO to Portland-pozzolan cements could improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as main starting materials, as well as silica fume, fly ash and blast furnace slag for the mineral admixture, were carried out for industrial waste material recycling. In order to increase the hydration activity, $MgCl_2$ was also added. To improve hydration activity, $MgCO_3$ and serpentinite were fired at $700^{\circ}C$ and autoclave treatment was conducted. In the case of $MgCO_3$ as starting material, hydration activity was the highest at firing temperature of $700^{\circ}C$. This $MgCO_3$ was completely transferred to MgO after firing. This occurred after the hydration reaction with water MgO was transferred completely to $Mg(OH)_2$ as a hydration product. In the case of using only $MgCO_3$, the compressive strength was 3.5MPa at 28 days. The addition of silica fume enhanced compressive strength to 5.5 MPa. In the composition of $MgCO_3$-serpentine, the addition of pozzolanic materials such as silica fume increased the compression strength. In particular, the addition of $MgCl_2$ compressive strength was increased to 80 MPa.

• Korean Chemical Engineering Research
• /
• 제57권6호
• /
• pp.812-825
• /
• 2019

국내에서 채광되는 백운석(dolomite, $CaMg(CO_3)_2$)을 회분식 형태의 마이크로웨이브 소성로($950^{\circ}C/60min$)에 의해 소성하여 경소백운석($CaO{\cdot}MgO$)을 제조하였다. 국내에서 산출된 두 개의 백운석 시료를 대상으로 경소백운석($CaO{\cdot}MgO$) 제조 후 수화 특성을 규명한 결과 반응성이 다름을 규명하였다. 경소백운석($CaO{\cdot}MgO$)의 수화 특성의 반응성을 이용하여 강산성 양이온 교환수지와 반응 시켜서 MgO를 분리하는 조건을 실시하였다. 분리 실험 조건은 경소백운석($CaO{\cdot}MgO$)과 $R-SO_3H$ (1:12 mass %)로 칼슘이온 흡착($Ca-(R-SO_3)_2$)하여 MgO를 분리하였다. 분리 후 MgO의 함량은 94 mass % 이상으로 분리되었다. 분리된 MgO를 $950^{\circ}C$, 60 min 동안 열처리 후 MgO의 순도는 96 mass %로 나타났다. 그리고칼슘 이온이 흡착된강산성 양이온교환수지($Ca-(R-SO_3)_2$)와 NaOH, $CO_2$ gas 반응에 의해서 98 mass %의 $CaCO_3$를 합성하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1261-1262
• /
• 2007

At first the $Ba_{0.5}Sr_{0.5}TiO_{3}$-MgO powder with $B_{2}O_{3}-Li_{2}CO_{3}$ were made by the Sol-Gel method. And then the thick films of BST-MgO with $B_{2}O_{3}-Li_{2}CO_{3}$ were fabricated on the $Al_{2}O_{3}$ substrates coated with Pt by the screen printing method. The structural and dielectric properties of the BST-MgO thick film with $B_{2}O_{3}-Li_{2}CO_{3}$ addition were investigated. The structure of the BST-MgO with $B_{2}O_{3}-Li_{2}CO_{3}$ thick films were dense and homogeneous with no pores. The dielectric constant and dielectric loss were increased with decreasing the $B_{2}O_{3}-Li_{2}CO_{3}$ addition ratio.

• 환경위생공학
• /
• 제21권3호
• /
• pp.9-14
• /
• 2006

From March 1, 2005 to August 31, 2006 mineral water wells were selected for 13 areas in Southeast Asia (Indonesia, Philippines, Thailand, Singapore) and 20 areas in Northeast Asia (Korea, North Korea, China, Japan) and the study on their mineral water quality was analyzed. - Mineral water quality was the best in Korea. Mineral spring waters in some area of China and North Korea and in the whole area of the Southeast Asia were of poor quality. - The hardness of mineral water was the low in Korea $(10{\sim}47mg/L\;as\;CaCO_3)$, Japan $(4{\sim}66mg/L\;as\; CaCO_3)$, Geumgang-san North Korea Area $(4mg/L\;as\;CaCO_3)$. Mineral spring water in Thailand, Indonesia $(1{\sim}97.5mg/L\;as\;CaCO_3)$ and in the other area $(120{\sim}1205mg/L\;as\;CaCO_3)$ were high degree of hardness. - pH value in the mineral water of Southeast Asia $(pH\;6.7{\sim}8.2)$ and Northeast Asia $(pH\;5.9{\sim}7.9)$ was up to WHO standard $(pH\;6.5{\sim}8.5)$. Fluorine of negative ion was found in 10 mineral waters: Indonesian mineral water 'ATARTN'(0.02mg/L), Thailand mineral water 'SIAM' (0.6mg/L), 'MASAFI' (0.02mg/L). Korean mineral water 'SAEMMULNARA' (1.1mg/L), 'SANSU'(0.6mg/L), 'ICIS'(0.3mg/L), 'DONGWON SAEM-MUL'(0.03mg/L), 'PYEONGCHANG' (0.6mg/L), North Korean mineral water 'KUMGANGSAN'(0.1mg/L), Japanese mineral water 'CRYSTAL GEYSER'(0.55mg/L). However Fluorine in the other 23 mineral waters were not detectable.