• Journal of Electrochemical Science and Technology
• /
• v.12 no.2
• /
• pp.230-236
• /
• 2021

Ionic conduction mechanism of Mg-Al layered double hydroxides (LDHs) intercalated with CO₃^2- (Mg-Al CO₃^2- LDH) was studied. The electromotive force for the water vapor concentration cell using Mg-Al CO₃^2- LDH as electrolyte showed water vapor partial pressure dependence and obeyed the Nernst equation, indicating that the hydroxide ion transport number of Mg-Al CO₃^2- LDH is almost unity. The ionic conductivity of Mg(OH)₂, MgCO₃ and Al₂(CO₃)₃ was also examined. Only Al₂(CO₃)₃ showed high hydroxide ion conductivity of the order of 10^-4 S cm^-1 under 80% relative humidity, suggesting that Al₂(CO₃)₃ is an ion conducting material and related to the generation of carrier by interaction with water. To discuss the ionic conduction mechanism, Mg-Al CO₃^2- LDH having deuterium water as interlayer water (Mg-Al CO₃^2- LDH(D₂O)) was prepared. After the adsorbed water molecules on the surface of Mg-Al CO₃^2- LDH(D₂O) were removed by drying, DC polarization test for dried Mg-Al CO₃^2- LDH(D₂O) was examined. The absorbance attributed to O-D-stretching band for Mg-Al CO₃^2- LDH(D₂O) powder at around the positively charged electrode is larger than that before polarization, indicating that the interlayer in Mg-Al CO₃^2- LDH is a hydroxide ion conduction channel.

• Journal of the Korean Magnetics Society
• /
• v.14 no.3
• /
• pp.94-98
• /
• 2004

The electronic structures and magnetism of MgCCo$_3$(001) surface terminated by the plane with the MgCo-Term (Mg, Co terminated) and the CCo-Term (C, Co terminated) were investigated using the all-electron full-potential linearized augmented Plane-wave method. For the MgCo-Term, the magnetic moment of Co atom of the surface is strongly enhanced to 1.00$\mu$$_{B}$, while the magnetic moment of Co atom of the subsurface is similar to that of the center layers. For the CCo-Term, the magnetic moments of Co atoms are enhanced to 0.75 and 0.80$\mu$$_{B}$ for the surface and subsurface layers, respectively. The magnetic moments of C and Mg atoms are coupled antiferromagnetically to that of the neighbour Co atoms. From the calculated density of states, we see that the enhancements of magnetic moments of Co atoms are closely related to localization of the Co-3d states.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.3
• /
• pp.281-289
• /
• 2015

Carbonation of concrete causes reduction of pH and subsequently causes steel corrosion for reinforced concrete structure. However, for plain concrete structure or PC product, it can lead to a decrease in porosity, high density, improvement of concrete, shrinkage-compensation. Recently, based on this theory, research of $CO_2$ curing effect has been performed, but it was mainly focused on its effects on compressive strength using only ordinary portland cement. Researches on $CO_2$ curing effect for concrete containing $CO_2$ reactive materials such as ${\gamma}-C_2S$, MgO haven't been investigated. Therefore, this study has performed experiments under water-binder ratio 40%, and the replacement ratios of ${\gamma}-C_2S$ and MgO were 90%. Micro-chemical analysis, measurement of compressive strength according to admixtures and $CO_2$ curing were investigated. Results from this study revealed that higher strength was measured in case of $CO_2$ curing compared with none $CO_2$ curing for plain specimen indicating difference between 1.08 and 1.26 times, in case of ${\gamma}-C_2S$ 90, MgO 90 specimen, incorporating high volume replaced as much as 90%, it was proven that when applying $CO_2$ curing, higher strength which has difference between 14.56 and 45.7 times, and between 6.5 and 10.37 times was measured for each specimen compared to none $CO_2$ curing. Through micro-chemical analysis, massive amount of $CaCO_3$, $MgCO_3$ and decrease of porosity were appeared.

• Korean Journal of Materials Research
• /
• v.22 no.11
• /
• pp.598-603
• /
• 2012

MgO based cement for the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. Furthermore, adding reactive MgO to Portland-pozzolan cement can improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as starting materials was carried out. In order to increase the hydration activity, $MgCO_3$ and serpentinite were fired at a temperature higher than $600^{\circ}C$. In the case of $MgCO_3$ as starting material, hydration activity was highest at $700^{\circ}C$ firing temperature; this $MgCO_3$ was completely transformed to MgO after firing. After the hydration reaction with water, MgO was totally transformed to $Mg(OH)_2$ as hydration product. In the case of using only $MgCO_3$, compressive strength was 35 $kgf/cm^2$ after 28 days. The addition of silica fume and $Mg(OH)_2$ led to an enhancements of the compressive strength to 55 $kgf/cm^2$ and 50 $kgf/cm^2$, respectively. Serpentine led to an up to 20% increase in the compressive strength; however, addition of this material beyond 20% led to a decrease of the compressive strength. When we added $MgCl_2$, the compressive strength tends to increase.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.175-176
• /
• 2008

In this study, the sintering properties and structural properties of the $Mg_5Ta_4O_{15}$cation-deficient perovskite ceramics with $Li_2CO_3$ additions are investigated. The cation-deficient perovskite ceramics are prepared through the solid-state route. According to the XRD pattern, $Mg_4Ta_2O_9$, $MgTa_2O_6$ and $Mg_5Ta_4O_{15}$ phase existed in sintered pure $Mg_5Ta_4O_{15}$ ceramics. With $Li_2CO_3$, additions, the peak intensities of $Mg_4Ta_2O_9$ and $MgTa_2O_6$ phase were reduced. Also, diffraction intensity of the $Mg_5Ta_4O_{15}$ phase was increased with increments of $Li_2CO_3$ additions. The bulk densities were increased with increasing of $Li_2CO_3$ amount and approach the theoretical density of the $Mg_5Ta_4O_{15}$ ceramics, more and more. Microstructure of the $Mg_5Ta_4O_{15}$ ceramics were densified more and more by additions of $Li_2CO_3$. The bulk density of $Mg_5Ta_4O_{15}$+5wt% $Li_2CO_3$ ceramics sintered at $1500^{\circ}C$ for 10 hours was $5.88g/cm^3$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.19-20
• /
• 2007

At first the $Ba_{0.5}Sr_{0.5}TiO_3$-MgO powder with $B_2O_3-Li_2CO_3$ were made by the Sol-Gel method. The thick films of BST-MgO with $B_2O_3-Li_2CO_3$ were fabricated on the $Al_2O_3$ substrates coated with Pt by the screen printing method. The structural and dielectric properties of the BST-MgO thick film with $B_2O_3-Li_2CO_3$, addition were investigated. The structure of the BST-MgO with $B_2O_3-Li_2CO_3$ thick films were dense and homogeneous with no pores. The dielectric constant was increased and dielectric loss was decreased with increasing the sintering temperature.

• Korean Journal of Materials Research
• /
• v.25 no.2
• /
• pp.75-80
• /
• 2015

The carbon dioxide($CO_2$) released while producing building materials is substantial and has been targeted as a leading contributor to global climate change. One of the most typical method to reducing $CO_2$ for building materials is the addition of slag and fly ash, like pozzolan material, while another method is reducing $CO_2$ production by carbon negative cement development. The MgO-based cement was from the low-temperature calcination of magnesite required less energy and emitted less $CO_2$ than the manufacturing of Portland cements. It is also believed that adding reactive MgO to Portland-pozzolan cements could improve their performance and also increase their capacity to absorb atmospheric $CO_2$. In this study, the basic research for magnesia cement using $MgCO_3$ and magnesium silicate ore (serpentine) as main starting materials, as well as silica fume, fly ash and blast furnace slag for the mineral admixture, were carried out for industrial waste material recycling. In order to increase the hydration activity, $MgCl_2$ was also added. To improve hydration activity, $MgCO_3$ and serpentinite were fired at $700^{\circ}C$ and autoclave treatment was conducted. In the case of $MgCO_3$ as starting material, hydration activity was the highest at firing temperature of $700^{\circ}C$. This $MgCO_3$ was completely transferred to MgO after firing. This occurred after the hydration reaction with water MgO was transferred completely to $Mg(OH)_2$ as a hydration product. In the case of using only $MgCO_3$, the compressive strength was 3.5MPa at 28 days. The addition of silica fume enhanced compressive strength to 5.5 MPa. In the composition of $MgCO_3$-serpentine, the addition of pozzolanic materials such as silica fume increased the compression strength. In particular, the addition of $MgCl_2$ compressive strength was increased to 80 MPa.

• Korean Chemical Engineering Research
• /
• v.57 no.6
• /
• pp.812-825
• /
• 2019

Two dolomite samples mined from the different mines were calcined using a batch-type microwave kiln ($950/60min^{\circ}C$) to produce $CaO{\cdot}MgO$. The hydration of the $CaO{\cdot}MgO$ samples shows different reactivity. MgO was separated by reacting with a strong acid cation exchange resin using the reactivity of the hydration properties of light dolomite ($CaO{\cdot}MgO$). Calcium ($Ca-(R-SO_3)_2$) was separated from the prepared $CaO{\cdot}MgO$ by the cation exchange resin ($CaO{\cdot}MgO:R-SO_3H=1:12mass%$). High purity MgO (higher than 94 mass %) with unburned $CaCO_3$ (1~2 mass %) was obtained by the separation process. The separated MgO was heated at $950^{\circ}C$ for 60 minutes to afford high purity MgO with MgO content higher than 96%. And High-grade $CaCO_3$ was prepared from the reaction with calcium adsorbed resin ($Ca-(R-SO_3)_2$) and NaOH, $CO_2$ gas.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1261-1262
• /
• 2007

At first the $Ba_{0.5}Sr_{0.5}TiO_{3}$-MgO powder with $B_{2}O_{3}-Li_{2}CO_{3}$ were made by the Sol-Gel method. And then the thick films of BST-MgO with $B_{2}O_{3}-Li_{2}CO_{3}$ were fabricated on the $Al_{2}O_{3}$ substrates coated with Pt by the screen printing method. The structural and dielectric properties of the BST-MgO thick film with $B_{2}O_{3}-Li_{2}CO_{3}$ addition were investigated. The structure of the BST-MgO with $B_{2}O_{3}-Li_{2}CO_{3}$ thick films were dense and homogeneous with no pores. The dielectric constant and dielectric loss were increased with decreasing the $B_{2}O_{3}-Li_{2}CO_{3}$ addition ratio.

• Journal of environmental and Sanitary engineering
• /
• v.21 no.3 s.61
• /
• pp.9-14
• /
• 2006

From March 1, 2005 to August 31, 2006 mineral water wells were selected for 13 areas in Southeast Asia (Indonesia, Philippines, Thailand, Singapore) and 20 areas in Northeast Asia (Korea, North Korea, China, Japan) and the study on their mineral water quality was analyzed. - Mineral water quality was the best in Korea. Mineral spring waters in some area of China and North Korea and in the whole area of the Southeast Asia were of poor quality. - The hardness of mineral water was the low in Korea $(10{\sim}47mg/L\;as\;CaCO_3)$, Japan $(4{\sim}66mg/L\;as\; CaCO_3)$, Geumgang-san North Korea Area $(4mg/L\;as\;CaCO_3)$. Mineral spring water in Thailand, Indonesia $(1{\sim}97.5mg/L\;as\;CaCO_3)$ and in the other area $(120{\sim}1205mg/L\;as\;CaCO_3)$ were high degree of hardness. - pH value in the mineral water of Southeast Asia $(pH\;6.7{\sim}8.2)$ and Northeast Asia $(pH\;5.9{\sim}7.9)$ was up to WHO standard $(pH\;6.5{\sim}8.5)$. Fluorine of negative ion was found in 10 mineral waters: Indonesian mineral water 'ATARTN'(0.02mg/L), Thailand mineral water 'SIAM' (0.6mg/L), 'MASAFI' (0.02mg/L). Korean mineral water 'SAEMMULNARA' (1.1mg/L), 'SANSU'(0.6mg/L), 'ICIS'(0.3mg/L), 'DONGWON SAEM-MUL'(0.03mg/L), 'PYEONGCHANG' (0.6mg/L), North Korean mineral water 'KUMGANGSAN'(0.1mg/L), Japanese mineral water 'CRYSTAL GEYSER'(0.55mg/L). However Fluorine in the other 23 mineral waters were not detectable.